Free tool · Reference

AP Chemistry Formula Sheet: Equations and Constants

This page lists the equations and constants you use in AP Chemistry, grouped the way the exam's equations and constants sheet groups them: atomic structure, equilibrium, kinetics, gases and solutions, and thermodynamics and electrochemistry. Every symbol is defined, each equation links to the unit where it is taught, and the page prints cleanly on paper.

Constants and conversions

QuantityValue
Avogadro's number\(N_A = 6.022 \times 10^{23}\ \mathrm{mol^{-1}}\)
Faraday's constant\(F = 96{,}485\ \text{coulombs per mole of electrons}\)
Planck's constant\(h = 6.626 \times 10^{-34}\ \mathrm{J\,s}\)
Speed of light\(c = 2.998 \times 10^{8}\ \mathrm{m\,s^{-1}}\)
Gas constant\(R = 8.314\ \mathrm{J\,mol^{-1}\,K^{-1}}\)
\(\phantom{R} = 0.08206\ \mathrm{L\,atm\,mol^{-1}\,K^{-1}}\)
\(\phantom{R} = 62.36\ \mathrm{L\,torr\,mol^{-1}\,K^{-1}}\)
Ion product of water\(K_w = 1.0 \times 10^{-14}\) at 25 °C
Pressure\(1\ \mathrm{atm} = 760\ \mathrm{mm\,Hg} = 760\ \mathrm{torr}\)
STP\(273.15\ \mathrm{K}\) and \(1.0\ \mathrm{atm}\); an ideal gas occupies \(22.4\ \mathrm{L\,mol^{-1}}\) at STP
Standard conditionsThe superscript \(^\circ\) means standard state: \(1\ \mathrm{atm}\) for gases, \(1\ \mathrm{M}\) for solutions, pure solids and liquids; tables are usually at 25 °C (298 K)
Temperature\(K = {}^\circ\mathrm{C} + 273\)

Units: L = liter, mL = milliliter, g = gram, nm = nanometer, atm = atmosphere, J = joule, kJ = kilojoule, V = volt, mol = mole, C = coulomb, K = kelvin. Constants are used across Unit 3, Unit 8 and Unit 9.

Atomic structure

  • Energy of a photon

    \[ E = h\nu \]
    \(E\)
    energy of one photon (J)
    \(h\)
    Planck's constant, \(6.626\times10^{-34}\ \mathrm{J\,s}\)
    \(\nu\)
    frequency (\(\mathrm{s^{-1}}\) or Hz)

    Used in Unit 1 (1.6, PES) and Unit 3 (3.11 to 3.12).

  • Wave relationship

    \[ c = \lambda\nu \]
    \(c\)
    speed of light, \(2.998\times10^{8}\ \mathrm{m\,s^{-1}}\)
    \(\lambda\)
    wavelength (m; \(1\ \mathrm{nm} = 10^{-9}\ \mathrm{m}\))
    \(\nu\)
    frequency (\(\mathrm{s^{-1}}\))

    Used in Unit 3 (3.11 to 3.12).

Equilibrium

For the reaction \(a\ce{A} + b\ce{B} \rightleftharpoons c\ce{C} + d\ce{D}\):

  • Equilibrium constant (concentrations)

    \[ K_c = \frac{[\ce{C}]^c[\ce{D}]^d}{[\ce{A}]^a[\ce{B}]^b} \]
    \([\ ]\)
    molar concentration at equilibrium (M)
    \(a,b,c,d\)
    coefficients in the balanced equation

    Pure solids and liquids are left out. Unit 7 (7.3 to 7.7); try the ICE table solver.

  • Equilibrium constant (pressures)

    \[ K_p = \frac{(P_{\ce{C}})^c(P_{\ce{D}})^d}{(P_{\ce{A}})^a(P_{\ce{B}})^b} \]
    \(P\)
    partial pressure of each gas at equilibrium (atm)

    Unit 7 (7.3 to 7.7).

  • Acid ionization constant

    \[ K_a = \frac{[\ce{H+}][\ce{A-}]}{[\ce{HA}]} \]
    \(\ce{HA}\)
    weak acid
    \(\ce{A-}\)
    its conjugate base

    Unit 8 (8.3); try the pH calculator.

  • Base ionization constant

    \[ K_b = \frac{[\ce{OH-}][\ce{HB+}]}{[\ce{B}]} \]
    \(\ce{B}\)
    weak base
    \(\ce{HB+}\)
    its conjugate acid

    Unit 8 (8.3).

  • Water and conjugate pairs

    \[ K_w = [\ce{H+}][\ce{OH-}] = 1.0\times10^{-14} \]\[ K_w = K_a \times K_b \]
    \(K_w\)
    value given is at 25 °C
    \(K_a \times K_b\)
    for a conjugate acid-base pair

    Unit 8 (8.1, 8.3).

  • pH and pOH

    \[ \mathrm{pH} = -\log[\ce{H+}] \]\[ \mathrm{pOH} = -\log[\ce{OH-}] \]\[ 14 = \mathrm{pH} + \mathrm{pOH} \ \text{(at 25 °C)} \]
    \([\ce{H+}]\)
    hydronium ion concentration (M), also written \([\ce{H3O+}]\)

    Unit 8 (8.1 to 8.2).

  • Henderson-Hasselbalch

    \[ \mathrm{pH} = \mathrm{p}K_a + \log\frac{[\ce{A-}]}{[\ce{HA}]} \]
    \(\mathrm{p}K_a\)
    \(-\log K_a\); similarly \(\mathrm{p}K_b = -\log K_b\)

    Unit 8 (8.9); try the buffer calculator.

Kinetics

  • Zero-order integrated rate law

    \[ [\ce{A}]_t - [\ce{A}]_0 = -kt \]
    \([\ce{A}]_t\)
    concentration at time \(t\)
    \([\ce{A}]_0\)
    initial concentration
    \(k\)
    rate constant (\(\mathrm{M\,s^{-1}}\))

    Unit 5 (5.3).

  • First-order integrated rate law

    \[ \ln[\ce{A}]_t - \ln[\ce{A}]_0 = -kt \]
    \(k\)
    rate constant (\(\mathrm{s^{-1}}\))
    \(t\)
    time

    A plot of \(\ln[\ce{A}]\) against \(t\) is a straight line with slope \(-k\). Unit 5 (5.3).

  • Second-order integrated rate law

    \[ \frac{1}{[\ce{A}]_t} - \frac{1}{[\ce{A}]_0} = kt \]
    \(k\)
    rate constant (\(\mathrm{M^{-1}\,s^{-1}}\))

    A plot of \(\frac{1}{[\ce{A}]}\) against \(t\) is a straight line with slope \(k\). Unit 5 (5.3).

  • Half-life (first order)

    \[ t_{1/2} = \frac{0.693}{k} \]
    \(t_{1/2}\)
    time for the concentration to halve; constant for a first-order reaction
    \(0.693\)
    \(\ln 2\)

    Unit 5 (5.3).

Gases, liquids and solutions

  • Ideal gas law

    \[ PV = nRT \]
    \(P\)
    pressure
    \(V\)
    volume
    \(n\)
    moles of gas
    \(R\)
    gas constant (match its units to \(P\) and \(V\))
    \(T\)
    temperature in kelvin

    Unit 3 (3.4).

  • Partial pressures (Dalton's law)

    \[ P_A = P_{\text{total}} \times X_A, \quad X_A = \frac{\text{moles } A}{\text{total moles}} \]\[ P_{\text{total}} = P_A + P_B + P_C + \cdots \]
    \(P_A\)
    partial pressure of gas A
    \(X_A\)
    mole fraction of A

    Unit 3 (3.4).

  • Moles from mass

    \[ n = \frac{m}{M} \]
    \(n\)
    moles
    \(m\)
    mass (g)
    \(M\)
    molar mass (\(\mathrm{g\,mol^{-1}}\))

    Unit 1 (1.1), Unit 4 (4.5); try the stoichiometry calculator.

  • Density

    \[ D = \frac{m}{V} \]
    \(D\)
    density
    \(m\)
    mass
    \(V\)
    volume

    Unit 3.

  • Kinetic energy of a molecule

    \[ KE = \tfrac{1}{2}mv^2 \]
    \(m\)
    mass of one molecule
    \(v\)
    speed

    Average KE is proportional to kelvin temperature. Unit 3 (3.5).

  • Molarity

    \[ M = \frac{\text{moles of solute}}{\text{liters of solution}} \]
    \(M\)
    molarity (\(\mathrm{mol\,L^{-1}}\))

    Unit 3 (3.7).

  • Beer-Lambert law

    \[ A = \varepsilon b c \]
    \(A\)
    absorbance (no units)
    \(\varepsilon\)
    molar absorptivity
    \(b\)
    path length
    \(c\)
    concentration

    Unit 3 (3.13).

Thermodynamics and electrochemistry

  • Heat (calorimetry)

    \[ q = mc\Delta T \]
    \(q\)
    heat (J)
    \(m\)
    mass (g)
    \(c\)
    specific heat capacity (\(\mathrm{J\,g^{-1}\,{}^\circ C^{-1}}\))
    \(\Delta T\)
    temperature change

    Unit 6 (6.4).

  • Standard entropy change

    \[ \Delta S^\circ = \sum S^\circ_{\text{products}} - \sum S^\circ_{\text{reactants}} \]
    \(S^\circ\)
    standard molar entropy (\(\mathrm{J\,mol^{-1}\,K^{-1}}\)), multiplied by coefficients

    Unit 9 (9.2).

  • Standard enthalpy change

    \[ \Delta H^\circ = \sum \Delta H^\circ_{f,\text{products}} - \sum \Delta H^\circ_{f,\text{reactants}} \]
    \(\Delta H^\circ_f\)
    standard enthalpy of formation (\(\mathrm{kJ\,mol^{-1}}\)); zero for elements in their standard state

    Unit 6 (6.8).

  • Standard free energy change (from formation)

    \[ \Delta G^\circ = \sum \Delta G^\circ_{f,\text{products}} - \sum \Delta G^\circ_{f,\text{reactants}} \]
    \(\Delta G^\circ_f\)
    standard free energy of formation (\(\mathrm{kJ\,mol^{-1}}\))

    Unit 9 (9.3).

  • Gibbs free energy

    \[ \Delta G^\circ = \Delta H^\circ - T\Delta S^\circ \]
    \(T\)
    temperature in kelvin
    units
    convert \(\Delta S^\circ\) from J to kJ before combining with \(\Delta H^\circ\)

    \(\Delta G^\circ < 0\): thermodynamically favorable. Unit 9 (9.3).

  • Free energy and equilibrium

    \[ \Delta G^\circ = -RT\ln K \]
    \(R\)
    \(8.314\ \mathrm{J\,mol^{-1}\,K^{-1}}\)
    \(K\)
    equilibrium constant

    \(K > 1\) when \(\Delta G^\circ < 0\). Unit 9 (9.5).

  • Free energy and cell potential

    \[ \Delta G^\circ = -nFE^\circ \]
    \(n\)
    moles of electrons transferred
    \(F\)
    \(96{,}485\ \mathrm{C\,mol^{-1}}\)
    \(E^\circ\)
    standard cell potential (V); \(1\ \mathrm{J} = 1\ \mathrm{C\,V}\)

    Unit 9 (9.8).

  • Current

    \[ I = \frac{q}{t} \]
    \(I\)
    current (amperes, A)
    \(q\)
    charge (coulombs, C)
    \(t\)
    time (s)

    Electrolysis: moles of electrons \(= \frac{It}{F}\). Unit 9 (9.10).

Also worth knowing

Relationships you are expected to be able to use. Learn these as well as the ones above.

  • Dilution

    \[ M_1V_1 = M_2V_2 \]
    \(M_1, V_1\)
    concentration and volume before
    \(M_2, V_2\)
    after dilution

    Unit 3 (3.7).

  • Percent yield

    \[ \%\ \text{yield} = \frac{\text{actual}}{\text{theoretical}} \times 100\% \]
    theoretical
    yield from the limiting reactant

    Unit 4 (4.5).

  • Percent ionization

    \[ \%\ \text{ionization} = \frac{[\ce{H+}]_{\text{eq}}}{[\ce{HA}]_0} \times 100\% \]
    \([\ce{HA}]_0\)
    initial acid concentration

    Unit 8 (8.3).

  • Relating \(K_p\) and \(K_c\)

    \[ K_p = K_c(RT)^{\Delta n} \]
    \(\Delta n\)
    moles of gaseous products minus moles of gaseous reactants
    \(R\)
    \(0.08206\ \mathrm{L\,atm\,mol^{-1}\,K^{-1}}\)

    Unit 7.

  • Enthalpy from bond enthalpies

    \[ \Delta H \approx \sum D_{\text{bonds broken}} - \sum D_{\text{bonds formed}} \]
    \(D\)
    average bond enthalpy (\(\mathrm{kJ\,mol^{-1}}\)), always positive

    Unit 6 (6.7).

  • Heat of a reaction for a given amount

    \[ q = n\,\Delta H_{\text{rxn}} \]
    \(n\)
    moles of reaction as written (moles of a species divided by its coefficient)

    Unit 6 (6.6).

  • Standard cell potential

    \[ E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} \]
    \(E^\circ\)
    standard reduction potentials (do not multiply by coefficients)

    Unit 9 (9.7 to 9.8).

  • Formal charge

    \[ \text{FC} = V - N - \tfrac{B}{2} \]
    \(V\)
    valence electrons of the free atom
    \(N\)
    nonbonding electrons
    \(B\)
    bonding electrons

    Unit 2 (2.6).

The exam provides its own equations and constants sheet and periodic table; always check the current College Board version before your exam. This page is our study summary, not an official document.

Questions and answers

Do you get a formula sheet on the AP Chemistry exam?

Yes. Students receive a periodic table and an equations and constants sheet. Knowing what is on it, and what each symbol means, saves time on exam day. Always check the current College Board version before your exam.

Which equations are not on the sheet?

Some relationships you are expected to know are not printed, for example \(M_1V_1 = M_2V_2\) for dilutions, percent yield and percent ionization. We list the most useful ones at the end of this page.

Chat on WhatsApp