Glossary
AP Chemistry glossary
413 terms from all nine units and the lab, each defined in one sentence, with formulas and a short example on its own page.
Showing 413 terms.
A
-
Absorbance
A unitless measure of how much light a sample absorbs at a given wavelength, measured with a spectrophotometer.
Unit 3 · 3.13 -
Accuracy
How close a measurement or result is to the true or accepted value.
Unit 1 -
Acid ionization constant
The equilibrium constant for a weak acid donating a proton to water; a larger means a stronger acid.
Unit 8 · 8.3 -
Acid strength and structure
How molecular features such as bond strength, electronegativity and resonance stabilization of the conjugate base determine how strong an acid is.
Unit 8 · 8.6 -
Activation energy
The minimum energy that colliding particles need to react; the height of the barrier from reactants to the transition state.
Unit 5 · 5.5 -
Actual yield
The amount of product actually obtained from a reaction in an experiment.
Unit 4 · 4.5 -
Alloy
A mixture of a metal with one or more other elements that has metallic properties.
Unit 2 · 2.4 -
Amine
An organic compound derived from ammonia in which one or more hydrogens are replaced by carbon groups, such as methylamine, ; amines are weak bases.
Unit 8 · 8.6 -
Amorphous solid
A solid without a regular long-range arrangement of particles, such as glass, rubber or many plastics.
Unit 3 · 3.2 -
Ampere
The SI unit of electric current, equal to one coulomb of charge per second.
Unit 9 · 9.10 -
Amphoteric
Able to act as either an acid or a base, as water and can.
Unit 4 · 4.8 -
Analyte
The substance whose amount or concentration is being determined in a chemical analysis such as a titration.
Unit 4 · 4.6 -
Analytical balance
A precise balance that measures mass to 0.0001 g, used for weighing samples in quantitative experiments.
Unit 1 · 1.1 -
Anion
A negatively charged ion, formed when an atom gains one or more electrons.
Unit 1 · 1.8 -
Anode
The electrode at which oxidation occurs in any electrochemical cell.
Unit 9 · 9.7 -
Aqueous
Dissolved in water; written after a formula in a chemical equation.
Unit 4 · 4.2 -
Arrhenius acid
A substance that increases () concentration in water; an Arrhenius base increases concentration.
Unit 8 · 8.1 -
Arrhenius equation
The equation , showing how the rate constant depends on activation energy and absolute temperature.
Unit 5 · 5.5 -
Atomic mass unit
A mass unit defined as exactly one-twelfth of the mass of a carbon-12 atom, about g.
Unit 1 · 1.1 -
Atomic number
The number of protons in the nucleus of an atom, which identifies the element.
Unit 1 · 1.5 -
Atomic radius
A measure of the size of an atom, usually half the distance between the nuclei of two bonded identical atoms.
Unit 1 · 1.7 -
Aufbau principle
In the ground state, electrons fill the lowest-energy available subshells first.
Unit 1 · 1.5 -
Autoionization of water
The reaction in which water molecules transfer a proton to each other: .
Unit 8 · 8.1 -
Average atomic mass
The abundance-weighted average of the masses of an element's naturally occurring isotopes, the value shown on the periodic table.
Unit 1 · 1.2 -
Average rate
The change in concentration divided by the time interval over which it occurs; the slope of the secant line on a concentration–time graph.
Unit 5 · 5.1 -
Avogadro's law
At constant temperature and pressure, the volume of a gas is directly proportional to the number of moles: .
Unit 3 · 3.4 -
Avogadro's number
The number of particles in one mole: .
Unit 1 · 1.1
B
-
Base ionization constant
The equilibrium constant for a weak base accepting a proton from water; a larger means a stronger base.
Unit 8 · 8.3 -
Battery
One or more galvanic cells packaged to supply electrical energy from a thermodynamically favorable redox reaction.
Unit 9 · 9.7 -
Beer–Lambert law
Absorbance is proportional to concentration and path length: .
Unit 3 · 3.13 -
Bent geometry
A molecular shape in which a central atom with two bonded atoms and one or two lone pairs forms an angle less than 180°, as in .
Unit 2 · 2.7 -
Best-fit line
The straight line that most closely matches a set of data points, with an equation .
Unit 3 · 3.13 -
Binary acid
An acid made of hydrogen and one other element, such as , or .
Unit 8 · 8.6 -
Binding energy
In photoelectron spectroscopy, the energy required to remove an electron from a particular subshell of an atom.
Unit 1 · 1.6 -
Blank
A sample containing everything except the substance being measured, used to zero an instrument such as a spectrophotometer.
Unit 3 · 3.13 -
Boiling point
The temperature at which a liquid's vapor pressure equals the surrounding pressure; the normal boiling point is measured at 1 atm.
Unit 3 · 3.3 -
Bomb calorimeter
A sealed, rigid steel container surrounded by water, used to measure the heat released by combustion reactions at constant volume.
Unit 6 · 6.4 -
Bond angle
The angle formed between two bonds that share a common atom.
Unit 2 · 2.7 -
Bond dipole
The separation of partial positive and negative charge along a polar covalent bond, drawn as an arrow pointing toward the more electronegative atom.
Unit 2 · 2.1 -
Bond energy
The energy required to break one mole of a particular bond in gaseous molecules; it equals the depth of the potential energy well.
Unit 2 · 2.2 -
Bond enthalpy
The enthalpy change for breaking one mole of a particular bond in gaseous molecules; always positive.
Unit 6 · 6.7 -
Bond length
The distance between the nuclei of two bonded atoms at the minimum of potential energy.
Unit 2 · 2.2 -
Bond order
The number of electron pairs shared between two atoms: 1 for a single bond, 2 for a double and 3 for a triple bond, or an average with resonance.
Unit 2 · 2.6 -
Bonding pair
A pair of electrons shared between two atoms in a covalent bond, drawn as a line in a Lewis diagram.
Unit 2 · 2.5 -
Boyle's law
At constant temperature and amount, the volume of a gas is inversely proportional to its pressure: .
Unit 3 · 3.4 -
Brønsted–Lowry acid
A species that donates a proton () to another species.
Unit 4 · 4.8 -
Brønsted–Lowry base
A species that accepts a proton () from another species.
Unit 4 · 4.8 -
Buffer
A solution that resists changes in pH when small amounts of acid or base are added, made from significant amounts of a weak acid and its conjugate base.
Unit 8 · 8.8 -
Buffer capacity
The amount of acid or base a buffer can neutralize before its pH changes significantly.
Unit 8 · 8.10 -
Buret
A long, graduated glass tube with a stopcock, used to deliver precise, measured volumes of a titrant.
Unit 4 · 4.6
C
-
Calibration curve
A graph of instrument response, such as absorbance, against known concentrations of standard solutions, used to find an unknown concentration.
Unit 3 · 3.13 -
Calorimeter
An insulated container used to measure the heat absorbed or released by a process; a coffee-cup calorimeter works at constant pressure.
Unit 6 · 6.4 -
Calorimetry
The measurement of heat flow in a chemical or physical process by tracking the temperature change of the surroundings.
Unit 6 · 6.4 -
Carboxylic acid
An organic acid containing the group, such as acetic acid; carboxylic acids are weak acids.
Unit 8 · 8.6 -
Catalyst
A substance that speeds up a reaction by providing an alternative pathway with lower activation energy, and is regenerated at the end.
Unit 5 · 5.11 -
Cathode
The electrode at which reduction occurs in any electrochemical cell.
Unit 9 · 9.7 -
Cation
A positively charged ion, formed when an atom loses one or more electrons.
Unit 1 · 1.8 -
Cell notation
A shorthand for a galvanic cell that lists the anode on the left and the cathode on the right, with single lines for phase boundaries and a double line for the salt bridge.
Unit 9 · 9.7 -
Cell potential and free energy
The relationship , linking a cell's standard potential to the free energy change of its reaction.
Unit 9 · 9.8 -
Charles's law
At constant pressure and amount, the volume of a gas is directly proportional to its kelvin temperature: .
Unit 3 · 3.4 -
Chemical bond
An attractive interaction that holds atoms or ions together in a substance, arising from the attraction between nuclei and electrons.
Unit 2 · 2.1 -
Chemical change
A change that produces new substances with different chemical identities by breaking and forming chemical bonds.
Unit 4 · 4.4 -
Chemical equation
A symbolic representation of a reaction showing reactants, products, their physical states and the mole ratios in which they react.
Unit 4 · 4.3 -
Chemical reaction
A process in which substances are converted into new substances by breaking and forming chemical bonds.
Unit 4 · 4.1 -
Chromatography
A separation technique in which components of a mixture move at different rates because they differ in attraction to a stationary phase and a mobile phase.
Unit 3 · 3.9 -
Coefficient
The number written in front of a formula in a balanced equation, giving the relative number of moles (or particles) of that substance.
Unit 4 · 4.3 -
Collision model
The model that particles must collide with enough energy (at least the activation energy) and the correct orientation for a reaction to occur.
Unit 5 · 5.5 -
Combined gas law
For a fixed amount of gas, , with temperatures in kelvins.
Unit 3 · 3.4 -
Combustion reaction
A rapid, exothermic reaction of a substance with oxygen; complete combustion of a hydrocarbon gives carbon dioxide and water.
Unit 4 · 4.7 -
Common-ion effect
The decrease in solubility of a salt, or ionization of a weak acid or base, when a solution already contains one of its ions.
Unit 7 · 7.12 -
Complete ionic equation
An equation that shows every strong electrolyte as separate ions, including spectator ions.
Unit 4 · 4.2 -
Compound
A pure substance made of two or more different elements chemically bonded in a fixed ratio.
Unit 1 · 1.3 -
Concentration cell
A galvanic cell with the same half-reaction in both compartments but different ion concentrations, so yet .
Unit 9 · 9.9 -
Concentration–time graph
A plot of species concentrations against time; at equilibrium the curves become flat, and sudden jumps show a disturbance.
Unit 7 · 7.8 -
Conditioning glassware
Rinsing a buret or pipet with a small amount of the solution it will hold, so that leftover water does not dilute that solution.
Unit 4 · 4.6 -
Conjugate acid–base pair
Two species that differ by exactly one proton, such as and , or and .
Unit 8 · 8.1 -
Core electrons
The electrons in an atom's inner, filled shells, which are held tightly and do not take part in bonding.
Unit 1 · 1.5 -
Coulomb
The SI unit of electric charge; one coulomb is the charge carried by a current of one ampere in one second.
Unit 9 · 9.10 -
Coulomb's law
The force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.
Unit 1 · 1.5 -
Coupled reactions
Pairing an unfavorable reaction with a favorable one that shares an intermediate, so that the combined process has .
Unit 9 · 9.6 -
Covalent bond
A bond in which two atoms share one or more pairs of electrons, typically between nonmetal atoms.
Unit 2 · 2.1 -
Covalent network solid
A solid in which atoms are joined by a continuous three-dimensional network of covalent bonds, such as diamond, quartz or silicon carbide.
Unit 3 · 3.2 -
Crystalline solid
A solid whose particles are arranged in a regular, repeating three-dimensional pattern.
Unit 3 · 3.2 -
Cuvette
A small, transparent container with a fixed path length, usually 1.00 cm, that holds a sample in a spectrophotometer.
Unit 3 · 3.13
D
-
Dalton's law of partial pressures
The total pressure of a gas mixture equals the sum of the partial pressures of the individual gases: .
Unit 3 · 3.4 -
Decomposition reaction
A reaction in which one compound breaks down into two or more simpler substances, such as .
Unit 4 · 4.7 -
Delocalized electrons
Electrons that are spread over three or more atoms rather than confined to a single bond or atom.
Unit 2 · 2.6 -
Dilution
Lowering the concentration of a solution by adding solvent, with the moles of solute unchanged: .
Unit 3 · 3.7 -
Dimensional analysis
A problem-solving method that multiplies a quantity by conversion factors arranged so that unwanted units cancel.
Unit 1 · 1.1 -
Dipole moment
A measure of the overall separation of positive and negative charge in a molecule; nonzero for polar molecules.
Unit 2 · 2.7 -
Dipole–dipole forces
Attractions between the partial positive end of one polar molecule and the partial negative end of another.
Unit 3 · 3.1 -
Dispersal of energy
The spreading of energy over more particles or more accessible energy levels, which increases entropy.
Unit 9 · 9.1 -
Distillation
A separation technique that uses differences in boiling point: the more volatile component vaporizes first and is condensed and collected.
Unit 3 · 3.9 -
Double bond
A covalent bond made of two shared electron pairs: one sigma bond and one pi bond.
Unit 2 · 2.5 -
Drying to constant mass
Repeatedly heating, cooling and weighing a sample until two successive masses agree, to make sure all water has been removed.
Unit 4 · 4.5 -
Dynamic equilibrium
The state of a reversible process in which the forward and reverse rates are equal, so concentrations stay constant even though both reactions continue.
Unit 7 · 7.1
E
-
Effective collision
A collision with enough energy and the right orientation of particles to break and form bonds and produce products.
Unit 5 · 5.5 -
Effective nuclear charge
The net positive charge felt by a valence electron: the nuclear charge reduced by shielding from inner electrons.
Unit 1 · 1.7 -
Electrochemical cell
A device in which a redox reaction either produces an electric current (galvanic cell) or is driven by one (electrolytic cell).
Unit 9 · 9.7 -
Electrode
A conductor, usually a metal or graphite, through which electrons enter or leave the solution in an electrochemical cell.
Unit 9 · 9.7 -
Electrolysis
The use of electric current to drive a thermodynamically unfavorable redox reaction, such as splitting water or plating a metal.
Unit 9 · 9.10 -
Electrolyte
A substance that produces ions when dissolved in water, so the solution conducts electricity.
Unit 4 · 4.2 -
Electrolytic cell
An electrochemical cell in which an external power source drives a thermodynamically unfavorable redox reaction.
Unit 9 · 9.7 -
Electromagnetic spectrum
The full range of electromagnetic radiation, ordered by wavelength from gamma rays and X-rays through UV, visible and infrared to microwaves and radio waves.
Unit 3 · 3.11 -
Electron
A negatively charged subatomic particle (charge ) with very small mass, found in orbitals around the nucleus.
Unit 1 · 1.5 -
Electron affinity
The energy change when a gaseous atom gains an electron; a more negative value means the atom attracts an added electron more strongly.
Unit 1 · 1.7 -
Electron configuration
A description of how an atom's or ion's electrons are distributed among shells and subshells, such as for sodium.
Unit 1 · 1.5 -
Electron domain
A region of electron density around a central atom: a lone pair or a bond, where single, double and triple bonds each count as one domain.
Unit 2 · 2.7 -
Electron sea model
A model of metals as a lattice of positive ions surrounded by delocalized valence electrons shared by the whole sample.
Unit 2 · 2.4 -
Electron-domain geometry
The arrangement of all electron domains, both bonding and lone pairs, around a central atom.
Unit 2 · 2.7 -
Electronegativity
The ability of an atom in a chemical bond to attract the shared electrons toward itself.
Unit 1 · 1.7 -
Element
A pure substance made of atoms that all have the same atomic number.
Unit 1 · 1.3 -
Elementary reaction
A single-step reaction that occurs exactly as written, in one molecular collision or event.
Unit 5 · 5.4 -
Empirical formula
The formula that shows the smallest whole-number ratio of atoms of each element in a compound.
Unit 1 · 1.3 -
Endothermic
Describes a process that absorbs heat from the surroundings, so and the surroundings get colder.
Unit 6 · 6.1 -
Endpoint
The point in a titration at which the indicator changes color, which is used to estimate the equivalence point.
Unit 4 · 4.6 -
Energy diagram
A diagram comparing the energy (enthalpy) of reactants and products, showing whether a process is endothermic or exothermic.
Unit 6 · 6.2 -
Enthalpy
A state function, , whose change equals the heat absorbed or released by a process at constant pressure.
Unit 6 · 6.6 -
Enthalpy of combustion
The enthalpy change when one mole of a substance burns completely in oxygen; always negative.
Unit 6 · 6.6 -
Enthalpy of fusion
The energy needed to melt one mole of a solid at its melting point; for water it is about 6.01 kJ/mol.
Unit 6 · 6.5 -
Enthalpy of reaction
The enthalpy change for a reaction as written, in kJ per mole of reaction ().
Unit 6 · 6.6 -
Enthalpy of solution
The enthalpy change when a solute dissolves in a solvent; it can be positive or negative.
Unit 6 · 6.6 -
Enthalpy of vaporization
The energy needed to vaporize one mole of a liquid; for water it is about 40.7 kJ/mol at 100 °C.
Unit 6 · 6.5 -
Entropy
A thermodynamic quantity, , that measures how dispersed the matter and energy of a system are; greater dispersal means higher entropy.
Unit 9 · 9.1 -
Entropy change
The change in entropy for a process, , positive when matter or energy becomes more dispersed.
Unit 9 · 9.2 -
Enzyme
A protein that acts as a biological catalyst, binding specific reactants (substrates) at an active site to lower the activation energy.
Unit 5 · 5.11 -
Equilibrium constant
The value of the reaction quotient at equilibrium, , which is constant for a given reaction at a given temperature.
Unit 7 · 7.3 -
Equilibrium expression
The ratio of product concentrations to reactant concentrations, each raised to its coefficient, used to write or for a reaction.
Unit 7 · 7.3 -
Equilibrium position
The particular set of concentrations present at equilibrium; many positions are possible for the same .
Unit 7 · 7.8 -
Equivalence point
The point in a titration at which the moles of titrant added exactly react with the moles of analyte, according to the balanced equation.
Unit 8 · 8.5 -
Erlenmeyer flask
A cone-shaped flask with a narrow neck, used to hold the analyte during a titration because it can be swirled without splashing.
Unit 4 · 4.6 -
Excess reactant
A reactant present in more than the amount needed to react with the limiting reactant, so some remains after the reaction.
Unit 4 · 4.5 -
Excited state
Any electron arrangement of higher energy than the ground state, reached when an electron absorbs energy and moves to a higher level.
Unit 1 · 1.5 -
Exothermic
Describes a process that releases heat to the surroundings, so and the surroundings get warmer.
Unit 6 · 6.1 -
Expanded octet
A Lewis structure in which a central atom from period 3 or below has more than eight electrons around it, as in or .
Unit 2 · 2.5
F
-
Faraday constant
The charge of one mole of electrons, .
Unit 9 · 9.8 -
Faraday's law
The amount of substance produced or consumed at an electrode is proportional to the charge passed: moles of electrons .
Unit 9 · 9.10 -
Filtration
Separating an insoluble solid from a liquid by passing the mixture through filter paper or another porous barrier.
Unit 3 · 3.9 -
First law of thermodynamics
Energy cannot be created or destroyed, only transferred or converted; the energy lost by a system equals the energy gained by its surroundings.
Unit 6 · 6.3 -
First-order reaction
A reaction whose rate is proportional to one reactant concentration, , so against time is a straight line.
Unit 5 · 5.3 -
Formal charge
The charge an atom would have in a Lewis structure if bonding electrons were shared equally: valence electrons minus nonbonding electrons minus half the bonding electrons.
Unit 2 · 2.6 -
Free energy and equilibrium constant
The relationship , which connects the standard free energy change of a reaction to its equilibrium constant.
Unit 9 · 9.5 -
Free energy of dissolution
The Gibbs free energy change when a solute dissolves, which decides whether dissolving is thermodynamically favorable.
Unit 7 · 7.14 -
Frequency
The number of wave cycles that pass a point per second, written and measured in hertz ().
Unit 3 · 3.11
G
-
Galvanic cell
An electrochemical cell in which a thermodynamically favorable redox reaction produces an electric current, with .
Unit 9 · 9.7 -
Gas constant
The proportionality constant in the ideal gas law, equal to or .
Unit 3 · 3.4 -
Gibbs free energy
A state function, , whose change tells whether a process is thermodynamically favorable at constant temperature and pressure.
Unit 9 · 9.3 -
Graduated cylinder
A cylindrical piece of glassware with volume markings, used for measuring approximate volumes of liquids.
Unit 3 · 3.7 -
Gravimetric analysis
A method of finding the amount of a substance by converting it to a solid of known composition and measuring that solid's mass.
Unit 4 · 4.5 -
Ground state
The lowest-energy arrangement of an atom's electrons.
Unit 1 · 1.5 -
Group
A vertical column of the periodic table; elements in a group have the same number of valence electrons and similar chemical properties.
Unit 1 · 1.7
H
-
Haber process
The industrial synthesis of ammonia, , kJ/mol, run at high pressure with an iron catalyst.
Unit 7 · 7.9 -
Half-cell
One compartment of an electrochemical cell, consisting of an electrode and the solution in which its half-reaction occurs.
Unit 9 · 9.7 -
Half-equivalence point
The point in a weak acid (or weak base) titration where half the analyte has been neutralized, so and .
Unit 8 · 8.5 -
Half-life
The time it takes for the concentration of a reactant to fall to half its value.
Unit 5 · 5.3 -
Half-reaction
An equation showing either the oxidation or the reduction part of a redox reaction, with electrons written explicitly.
Unit 4 · 4.9 -
Heat
Energy transferred between objects because of a temperature difference, always flowing from hotter to colder; written .
Unit 6 · 6.3 -
Heat capacity
The energy needed to raise the temperature of a whole object or sample by 1 °C, in J/°C.
Unit 6 · 6.4 -
Heat equation (q = mcΔT)
The equation for the heat absorbed or released when a substance changes temperature without changing phase.
Unit 6 · 6.4 -
Heating curve
A graph of temperature against heat added, with sloped segments where one phase warms and flat plateaus where a phase change occurs.
Unit 6 · 6.5 -
Henderson–Hasselbalch equation
An equation for the pH of a buffer: .
Unit 8 · 8.9 -
Hess's law
If a reaction is the sum of several steps, its enthalpy change is the sum of the steps' enthalpy changes.
Unit 6 · 6.9 -
Heterogeneous catalyst
A catalyst in a different phase from the reactants, usually a solid surface on which gas or liquid reactants adsorb.
Unit 5 · 5.11 -
Heterogeneous equilibrium
An equilibrium involving species in more than one phase, such as a solid in contact with a solution or gas.
Unit 7 · 7.3 -
Heterogeneous mixture
A mixture whose composition is not uniform, so different parts of a sample have different properties.
Unit 1 · 1.4 -
Homogeneous catalyst
A catalyst in the same phase as the reactants, such as an aqueous acid catalyzing a reaction in solution.
Unit 5 · 5.11 -
Homogeneous equilibrium
An equilibrium in which all reactants and products are in the same phase, such as all gases or all aqueous.
Unit 7 · 7.3 -
Homogeneous mixture
A mixture with uniform composition throughout, in which the components are not visibly distinguishable.
Unit 1 · 1.4 -
Hund's rule
Electrons occupy degenerate orbitals singly, with parallel spins, before any orbital in that subshell gets a second electron.
Unit 1 · 1.5 -
Hybridization
The mixing of an atom's atomic orbitals to form equivalent hybrid orbitals that match the observed geometry of its bonds.
Unit 2 · 2.7 -
Hydrate
An ionic compound with a fixed number of water molecules in its crystal structure, such as .
Unit 1 · 1.3 -
Hydrogen bonding
A strong dipole–dipole attraction between a hydrogen atom bonded to N, O or F and a lone pair on a nearby N, O or F atom.
Unit 3 · 3.1 -
Hydronium ion
The ion , formed when a proton bonds to a water molecule; it is what makes aqueous solutions acidic.
Unit 4 · 4.8
I
-
ICE table
A table of Initial concentrations, Changes and Equilibrium concentrations used to solve equilibrium problems.
Unit 7 · 7.7 -
Ideal gas
A hypothetical gas whose particles have no volume and no attractions for each other, and which obeys exactly.
Unit 3 · 3.4 -
Ideal gas law
The equation relating the pressure, volume, amount and absolute temperature of an ideal gas.
Unit 3 · 3.4 -
Incomplete octet
A Lewis structure in which the central atom has fewer than eight valence electrons, as boron does in .
Unit 2 · 2.5 -
Independent variable
The variable an experimenter deliberately changes; the dependent variable is what is measured in response, and controlled variables are kept constant.
Unit 1 -
Indicator
A weak acid whose acid form and conjugate base form have different colors, used to signal the endpoint of a titration.
Unit 8 · 8.5 -
Inductive effect
The pulling of electron density through bonds by electronegative atoms, which can weaken an O–H bond and strengthen an acid.
Unit 8 · 8.6 -
Inert gas addition
Adding an unreactive gas to an equilibrium mixture at constant volume raises the total pressure but does not shift the equilibrium.
Unit 7 · 7.10 -
Infrared spectroscopy
A technique that measures absorption of infrared radiation, which changes the vibrational energy of bonds and helps identify functional groups.
Unit 3 · 3.11 -
Initial rate
The instantaneous rate of a reaction at the moment it begins, before reactant concentrations have changed significantly.
Unit 5 · 5.2 -
Instantaneous rate
The rate of a reaction at one particular moment, equal to the slope of the tangent line to a concentration–time curve.
Unit 5 · 5.1 -
Integrated rate law
An equation giving reactant concentration as a function of time, used to identify reaction order from which plot is linear.
Unit 5 · 5.3 -
Intermediate
A species formed in one step of a mechanism and consumed in a later step, so it does not appear in the overall equation.
Unit 5 · 5.7 -
Intermolecular forces
Attractive forces between separate molecules (or between molecules and ions) that determine physical properties such as boiling point and solubility.
Unit 3 · 3.1 -
Interstitial alloy
An alloy in which much smaller atoms occupy the spaces (interstices) between the atoms of a metal lattice.
Unit 2 · 2.4 -
Ion
An atom or group of atoms that carries a net electric charge because it has gained or lost electrons.
Unit 1 · 1.8 -
Ion product
The reaction quotient for a dissolving salt, calculated from the actual ion concentrations in the same form as .
Unit 7 · 7.11 -
Ionic bond
The electrostatic attraction between oppositely charged ions, typically formed when a metal transfers electrons to a nonmetal.
Unit 2 · 2.1 -
Ionic radius
The size of an ion; cations are smaller than their neutral atoms and anions are larger.
Unit 1 · 1.7 -
Ionic solid
A solid made of cations and anions held in a repeating three-dimensional lattice by ionic bonds.
Unit 2 · 2.3 -
Ionization energy
The energy required to remove the most loosely held electron from a gaseous atom or ion.
Unit 1 · 1.7 -
Ion–dipole forces
Attractions between an ion and the oppositely charged end of a polar molecule, such as between and the oxygen end of water.
Unit 3 · 3.1 -
Isoelectronic
Having the same number of electrons and the same electron configuration, as , , , and do.
Unit 1 · 1.7 -
Isotope
Atoms of the same element (same number of protons) that have different numbers of neutrons and therefore different masses.
Unit 1 · 1.2
J
-
Joule
The SI unit of energy; 1 kJ = 1000 J and 1 calorie = 4.184 J.
Unit 6 · 6.3
K
-
Ka × Kb = Kw relationship
For any conjugate acid–base pair in water, at 25 °C.
Unit 8 · 8.3 -
Kc
The equilibrium constant written in terms of molar concentrations of the species in the equilibrium expression.
Unit 7 · 7.3 -
Kelvin temperature scale
The absolute temperature scale, which starts at absolute zero; .
Unit 3 · 3.4 -
Kinetic control
The situation in which a thermodynamically favorable reaction does not occur at a measurable rate because its activation energy is too high.
Unit 9 · 9.4 -
Kinetic energy
The energy of motion, .
Unit 6 · 6.3 -
Kinetic molecular theory
A model that explains gas behavior by treating gases as tiny particles in constant random motion with elastic collisions and no attractions.
Unit 3 · 3.5 -
Kp
The equilibrium constant for a gas-phase reaction written in terms of partial pressures (in atm).
Unit 7 · 7.3 -
Kw
The equilibrium constant for the autoionization of water, at 25 °C.
Unit 8 · 8.1
L
-
Lattice energy
The energy associated with separating one mole of an ionic solid into its gaseous ions; it measures the strength of ionic bonding.
Unit 2 · 2.3 -
Law of conservation of mass
In a chemical reaction, mass is neither created nor destroyed: the total mass of products equals the total mass of reactants.
Unit 4 · 4.3 -
Law of definite proportions
A pure compound always contains the same elements in the same proportions by mass, regardless of its source or how it was made.
Unit 1 · 1.3 -
Le Chatelier's principle
When a system at equilibrium is disturbed, it shifts in the direction that partly counteracts the disturbance.
Unit 7 · 7.9 -
Lewis acid
A species that accepts an electron pair to form a new covalent bond; a Lewis base donates the electron pair.
Unit 8 · 8.1 -
Lewis diagram
A drawing of a molecule or ion that shows how its valence electrons are arranged as bonding pairs (lines) and lone pairs (dots).
Unit 2 · 2.5 -
Like dissolves like
The rule that substances dissolve best in solvents with similar intermolecular forces: polar with polar, nonpolar with nonpolar.
Unit 3 · 3.10 -
Limiting reactant
The reactant that is completely used up first in a reaction, which limits the amount of product that can form.
Unit 4 · 4.5 -
Linear geometry
A molecular shape in which atoms lie in a straight line with a 180° bond angle around the central atom, as in .
Unit 2 · 2.7 -
Linearization
Transforming data, for example plotting or against time, so that the relationship appears as a straight line.
Unit 5 · 5.3 -
Logarithm
The exponent to which 10 must be raised to give a number: if , then .
Unit 8 · 8.2 -
London dispersion forces
Weak attractions between temporary dipoles caused by momentary uneven electron distributions; present between all molecules and atoms.
Unit 3 · 3.1 -
Lone pair
A pair of valence electrons that belongs to one atom and is not shared in a bond.
Unit 2 · 2.5
M
-
Magnitude of K
What the size of the equilibrium constant says about an equilibrium mixture: favors products, favors reactants.
Unit 7 · 7.5 -
Malleability
The ability of a solid to be hammered or rolled into sheets without breaking; a typical property of metals.
Unit 2 · 2.4 -
Manipulating K
Rules for finding of a modified reaction: reversing gives , multiplying coefficients by gives , and adding reactions multiplies their values.
Unit 7 · 7.6 -
Mass number
The total number of protons and neutrons in the nucleus of an atom.
Unit 1 · 1.2 -
Mass spectrometry
A technique that separates ionized particles by their mass-to-charge ratio, giving a spectrum that shows the masses and relative abundances of isotopes.
Unit 1 · 1.2 -
Maxwell–Boltzmann distribution
A graph showing how many particles in a sample have each speed (or kinetic energy) at a given temperature.
Unit 3 · 3.5 -
Melting point
The temperature at which a solid and its liquid are in equilibrium; the solid melts as heat is added at this temperature.
Unit 3 · 3.2 -
Meniscus
The curved surface of a liquid in a narrow tube; for water it curves downward, and volumes are read at the bottom of the curve.
Unit 4 · 4.6 -
Metal
An element that is typically shiny, malleable and a good conductor, and that tends to lose electrons to form cations.
Unit 1 · 1.7 -
Metallic bond
The attraction between metal cations and a sea of delocalized valence electrons that moves freely through the metal.
Unit 2 · 2.1 -
Metallic solid
A solid made of metal atoms held together by metallic bonding, with delocalized electrons throughout.
Unit 3 · 3.2 -
Metalloid
An element with properties between those of metals and nonmetals, such as silicon, germanium and arsenic.
Unit 1 · 1.7 -
Method of initial rates
Finding the orders of a rate law by comparing initial rates of trials in which one reactant concentration changes while the others stay fixed.
Unit 5 · 5.2 -
Mixture
A physical combination of two or more substances whose proportions can vary and that can be separated by physical means.
Unit 1 · 1.4 -
Mobile phase
The solvent (or gas) that moves through a chromatography system, carrying the components of the mixture.
Unit 3 · 3.9 -
Molar absorptivity
The constant in that measures how strongly a substance absorbs light at a specific wavelength.
Unit 3 · 3.13 -
Molar heat capacity
The energy needed to raise the temperature of one mole of a substance by 1 °C, in J/(mol·°C).
Unit 6 · 6.4 -
Molar mass
The mass of one mole of a substance, in grams per mole, numerically equal to its average particle mass in atomic mass units.
Unit 1 · 1.1 -
Molar solubility
The number of moles of a solid that dissolve per liter to make a saturated solution, written .
Unit 7 · 7.11 -
Molar volume
The volume occupied by one mole of a gas; for an ideal gas at 0 °C and 1 atm (STP) it is 22.4 L.
Unit 3 · 3.4 -
Molarity
The concentration of a solution in moles of solute per liter of solution: .
Unit 3 · 3.7 -
Mole
The SI unit for amount of substance: one mole contains Avogadro's number, , of particles.
Unit 1 · 1.1 -
Mole fraction
The ratio of the moles of one component to the total moles of all components in a mixture.
Unit 3 · 3.4 -
Mole ratio
The ratio of moles of two substances in a reaction, taken from the coefficients of the balanced equation.
Unit 4 · 4.5 -
Molecular equation
A chemical equation that writes all reactants and products as complete neutral formulas, even if they exist as ions in solution.
Unit 4 · 4.2 -
Molecular formula
The formula giving the actual number of atoms of each element in one molecule of a compound.
Unit 1 · 1.3 -
Molecular geometry
The three-dimensional arrangement of the atoms in a molecule, named from the positions of the atoms only, not the lone pairs.
Unit 2 · 2.7 -
Molecular solid
A solid made of discrete molecules held together by intermolecular forces, such as ice, dry ice or sugar.
Unit 3 · 3.2 -
Molecularity
The number of reactant particles that take part in an elementary step: unimolecular (one), bimolecular (two) or termolecular (three).
Unit 5 · 5.4 -
Monoprotic acid
An acid that can donate only one proton per molecule, such as , or acetic acid.
Unit 8 · 8.1 -
Multistep reaction energy profile
An energy profile for a reaction with more than one elementary step, showing one peak per step and an intermediate in each valley.
Unit 5 · 5.10
N
-
Natural logarithm
The logarithm to base , written ; .
Unit 5 · 5.3 -
Nernst equation
The equation , giving the cell potential under nonstandard concentrations.
Unit 9 · 9.9 -
Net ionic equation
An equation that shows only the particles that actually change in a reaction, with spectator ions removed.
Unit 4 · 4.2 -
Neutral solution
A solution in which ; at 25 °C its pH is 7.00.
Unit 8 · 8.2 -
Neutralization reaction
A reaction between an acid and a base that transfers a proton, often producing water and a salt.
Unit 4 · 4.8 -
Neutron
An uncharged subatomic particle in the nucleus with a mass of about 1 amu.
Unit 1 · 1.5 -
Nonelectrolyte
A substance that dissolves in water as neutral molecules, so its solution does not conduct electricity.
Unit 4 · 4.2 -
Nonmetal
An element that is typically a poor conductor and brittle as a solid, and that tends to gain or share electrons.
Unit 1 · 1.7 -
Nonpolar covalent bond
A covalent bond in which electrons are shared equally or nearly equally because the atoms have the same or similar electronegativity.
Unit 2 · 2.1 -
Nonpolar molecule
A molecule with no net dipole moment, either because its bonds are nonpolar or because its symmetry cancels its bond dipoles.
Unit 2 · 2.7 -
Nucleus
The tiny, dense, positively charged center of an atom, containing its protons and neutrons.
Unit 1 · 1.5
O
-
Octahedral geometry
A molecular shape with six atoms around a central atom, all at 90° to their neighbors, as in .
Unit 2 · 2.7 -
Octet rule
Main-group atoms tend to gain, lose or share electrons until they are surrounded by eight valence electrons.
Unit 2 · 2.5 -
Orbital
A region of space around the nucleus where an electron of a particular energy is likely to be found; each orbital holds up to two electrons.
Unit 1 · 1.5 -
Overall reaction order
The sum of the exponents in a rate law; for the overall order is 3.
Unit 5 · 5.2 -
Oxidation
The loss of electrons by a species, shown by an increase in its oxidation number.
Unit 4 · 4.9 -
Oxidation number
The charge an atom would have if all its bonds were completely ionic; used to track electron transfer in redox reactions.
Unit 4 · 4.9 -
Oxidation–reduction reaction
A reaction in which electrons are transferred, so that one species is oxidized (loses electrons) and another is reduced (gains electrons).
Unit 4 · 4.9 -
Oxidizing agent
The reactant that causes another species to be oxidized by accepting its electrons; the oxidizing agent is itself reduced.
Unit 4 · 4.9 -
Oxyacid
An acid in which the acidic hydrogen is bonded to an oxygen atom that is bonded to a central atom, such as , or .
Unit 8 · 8.6
P
-
Parallax error
A reading error caused by viewing a scale or meniscus from an angle instead of straight on.
Unit 1 -
Partial pressure
The pressure that one gas in a mixture would exert if it alone occupied the whole container at the same temperature.
Unit 3 · 3.4 -
Particulate diagram
A drawing that represents a substance or mixture at the level of atoms, ions or molecules.
Unit 3 · 3.8 -
Pauli exclusion principle
No two electrons in an atom can have the same set of four quantum numbers, so an orbital holds at most two electrons of opposite spin.
Unit 1 · 1.5 -
Percent composition
The percentage of a compound's total mass contributed by each element.
Unit 1 · 1.3 -
Percent error
The difference between an experimental and an accepted value as a percentage of the accepted value.
Unit 1 -
Percent ionization
The fraction of a weak acid's molecules that are ionized at equilibrium, times 100%: .
Unit 8 · 8.3 -
Percent yield
The actual yield divided by the theoretical yield, times 100%.
Unit 4 · 4.5 -
Period
A horizontal row of the periodic table; elements in a period have valence electrons in the same principal shell.
Unit 1 · 1.7 -
Periodic trends
Regular patterns in atomic properties such as radius, ionization energy and electronegativity across periods and down groups of the periodic table.
Unit 1 · 1.7 -
Phase change
A physical change between solid, liquid and gas, such as melting, freezing, vaporization, condensation, sublimation or deposition.
Unit 6 · 6.5 -
Photoelectric effect
The ejection of electrons from a metal surface when it absorbs light of high enough frequency.
Unit 3 · 3.12 -
Photoelectron spectroscopy
A technique that measures the energy needed to remove electrons from each subshell of an atom, giving evidence for its electron configuration.
Unit 1 · 1.6 -
Photon
A particle (quantum) of electromagnetic radiation, with energy .
Unit 3 · 3.11 -
Physical change
A change in the form or state of a substance that does not change its chemical identity, such as melting, boiling or dissolving.
Unit 4 · 4.4 -
Pi bond
A covalent bond formed by side-by-side overlap of unhybridized orbitals, with electron density above and below the internuclear axis.
Unit 2 · 2.7 -
Planck's constant
The constant that relates a photon's energy to its frequency in .
Unit 3 · 3.11 -
Polar covalent bond
A covalent bond in which electrons are shared unequally because the two atoms differ in electronegativity, giving partial charges and .
Unit 2 · 2.1 -
Polar molecule
A molecule with a net dipole moment, so one end is partly negative and the other partly positive.
Unit 2 · 2.7 -
Polarizability
How easily the electron cloud of an atom or molecule can be distorted to form a temporary dipole.
Unit 3 · 3.1 -
Polyatomic ion
A charged particle made of two or more covalently bonded atoms, such as , or .
Unit 1 · 1.8 -
Polyprotic acid
An acid that can donate more than one proton per molecule, such as , or .
Unit 8 · 8.5 -
Potential energy
Stored energy due to position or arrangement; in chemistry, the energy stored in the attractions and repulsions between charged particles.
Unit 6 · 6.3 -
Potential energy curve
A graph of potential energy against internuclear distance for two atoms, whose minimum shows the bond length and whose depth shows the bond energy.
Unit 2 · 2.2 -
Pre-equilibrium approximation
Treating a fast, reversible early step as being at equilibrium so that an intermediate's concentration can be written in terms of reactant concentrations.
Unit 5 · 5.9 -
Precipitate
An insoluble solid that forms when two solutions are mixed, written with .
Unit 4 · 4.7 -
Precipitation reaction
A reaction in aqueous solution in which cations and anions combine to form an insoluble solid.
Unit 4 · 4.7 -
Precision
How close repeated measurements are to one another, regardless of whether they are close to the true value.
Unit 1 -
Pressure
Force per unit area; for a gas, it results from particles colliding with the container walls.
Unit 3 · 3.4 -
Primary standard
A very pure, stable solid of known formula, such as potassium hydrogen phthalate (KHP), that can be weighed accurately to make or standardize solutions.
Unit 4 · 4.6 -
Product
A substance formed in a chemical reaction, written on the right side of the equation.
Unit 4 · 4.1 -
Proton
A positively charged subatomic particle (charge +1) in the nucleus, with a mass of about 1 amu.
Unit 1 · 1.5 -
Pseudo-first-order reaction
A reaction that behaves as first order because one reactant is in such large excess that its concentration barely changes.
Unit 5 · 5.3 -
Pure substance
Matter with a fixed composition and distinct properties: either a single element or a single compound.
Unit 1 · 1.3
R
-
Random error
Unpredictable variation that scatters measurements above and below the true value, limiting precision.
Unit 1 -
Rate constant
The proportionality constant in a rate law; it depends on temperature and on any catalyst, but not on concentration.
Unit 5 · 5.2 -
Rate law
An equation relating the rate of a reaction to the concentrations of reactants, such as .
Unit 5 · 5.2 -
Rate-determining step
The slowest elementary step in a mechanism, which limits the overall rate and sets the rate law.
Unit 5 · 5.8 -
Reactant
A substance that is consumed in a chemical reaction, written on the left side of the equation.
Unit 4 · 4.1 -
Reaction energy profile
A graph of potential energy along the reaction pathway, showing reactants, transition states, any intermediates and products.
Unit 5 · 5.6 -
Reaction mechanism
The sequence of elementary steps by which a reaction proceeds; the steps add up to the overall balanced equation.
Unit 5 · 5.7 -
Reaction order
The exponent of a reactant's concentration in the rate law, showing how the rate depends on that concentration.
Unit 5 · 5.2 -
Reaction quotient
The ratio , with the same form as , calculated from the current (not necessarily equilibrium) concentrations or pressures.
Unit 7 · 7.3 -
Reaction rate
The change in concentration of a reactant or product per unit time, usually in .
Unit 5 · 5.1 -
Real gas
An actual gas, whose particles have volume and attract one another, so it deviates from the ideal gas law at high pressure and low temperature.
Unit 3 · 3.6 -
Reducing agent
The reactant that causes another species to be reduced by giving it electrons; the reducing agent is itself oxidized.
Unit 4 · 4.9 -
Reduction
The gain of electrons by a species, shown by a decrease in its oxidation number.
Unit 4 · 4.9 -
Relative abundance
The fraction or percentage of an element's atoms that are a particular isotope, read from peak heights in a mass spectrum.
Unit 1 · 1.2 -
Resonance
The description of a molecule or ion whose electrons cannot be shown by one Lewis diagram, so the true structure is an average of several resonance structures.
Unit 2 · 2.6 -
Resonance structure
One of two or more valid Lewis diagrams for the same arrangement of atoms that differ only in where electrons are placed.
Unit 2 · 2.6 -
Retention factor
In chromatography, the distance a component travels divided by the distance the solvent front travels: .
Unit 3 · 3.9 -
Reversible reaction
A reaction that can proceed in both the forward and reverse directions, written with a double arrow .
Unit 7 · 7.1
S
-
STP
Standard temperature and pressure for gases: 0 °C (273 K) and 1 atm.
Unit 3 · 3.4 -
Salt
An ionic compound made of a cation from a base and an anion from an acid, such as or .
Unit 4 · 4.8 -
Salt bridge
A tube or porous barrier containing an inert electrolyte that connects the two half-cells and lets ions flow to keep each compartment electrically neutral.
Unit 9 · 9.7 -
Salt hydrolysis
The reaction of a salt's ions with water that makes the solution acidic or basic, when an ion is the conjugate of a weak acid or weak base.
Unit 8 · 8.4 -
Saturated solution
A solution holding the maximum amount of dissolved solute at that temperature, in equilibrium with undissolved solid.
Unit 7 · 7.11 -
Scientific notation
Writing a number as a coefficient between 1 and 10 times a power of ten, such as .
Unit 1 -
Second law of thermodynamics
In any thermodynamically favorable process, the total entropy of the universe increases.
Unit 9 · 9.1 -
Second-order reaction
A reaction whose rate is proportional to the square of a reactant concentration, , so against time is a straight line.
Unit 5 · 5.3 -
Seesaw geometry
A molecular shape from five electron domains with one lone pair, as in .
Unit 2 · 2.7 -
Selective precipitation
Separating ions in a mixture by adding a reagent that precipitates one ion while others, with larger values for that reagent, stay dissolved.
Unit 7 · 7.11 -
Serial dilution
A series of stepwise dilutions, each made from the previous solution, to produce solutions of decreasing known concentration.
Unit 3 · 3.7 -
Shell
The set of orbitals with the same principal quantum number ; higher shells are larger and farther from the nucleus.
Unit 1 · 1.5 -
Shielding
The reduction in attraction between the nucleus and a valence electron caused by repulsion from the electrons between them.
Unit 1 · 1.7 -
Sigma bond
A covalent bond formed by head-on overlap of orbitals, with electron density along the line between the two nuclei.
Unit 2 · 2.7 -
Significant figures
The digits in a measured or calculated value that carry meaning: all certain digits plus the first estimated digit.
Unit 1 -
Single bond
A covalent bond consisting of one shared pair of electrons, made of one sigma bond.
Unit 2 · 2.5 -
Small-x approximation
Assuming the change is negligible compared with an initial concentration when is small, so that .
Unit 7 · 7.7 -
Solubility
The maximum amount of a solute that dissolves in a given amount of solvent at a particular temperature, giving a saturated solution.
Unit 3 · 3.10 -
Solubility product constant
The equilibrium constant for a slightly soluble ionic solid dissolving into its ions.
Unit 7 · 7.11 -
Solubility rules
Guidelines for predicting whether an ionic compound dissolves in water; on the AP exam, all sodium, potassium, ammonium and nitrate salts are soluble.
Unit 4 · 4.7 -
Solute
The substance dissolved in a solution, usually present in the smaller amount.
Unit 3 · 3.7 -
Solution
A homogeneous mixture in which a solute is evenly dispersed in a solvent at the particle level.
Unit 3 · 3.7 -
Solvent
The substance in which a solute dissolves, usually the component present in the largest amount.
Unit 3 · 3.7 -
Specific heat capacity
The energy needed to raise the temperature of 1 gram of a substance by 1 °C (or 1 K).
Unit 6 · 6.4 -
Spectator ion
An ion that is present in a reaction mixture but is unchanged by the reaction, appearing identically on both sides of the complete ionic equation.
Unit 4 · 4.2 -
Spectrophotometer
An instrument that measures how much light of a selected wavelength a sample absorbs.
Unit 3 · 3.13 -
Square planar geometry
A flat molecular shape with four atoms at the corners of a square around a central atom with two lone pairs, as in .
Unit 2 · 2.7 -
Standard cell potential
The voltage of an electrochemical cell under standard conditions: .
Unit 9 · 9.8 -
Standard enthalpy of formation
The enthalpy change when one mole of a compound forms from its elements in their standard states.
Unit 6 · 6.8 -
Standard free energy change
The free energy change, , for a reaction with all species in their standard states.
Unit 9 · 9.3 -
Standard hydrogen electrode
The reference half-cell, at 1 M and 1 atm on platinum, assigned a potential of exactly 0 V.
Unit 9 · 9.8 -
Standard molar entropy
The entropy of one mole of a substance in its standard state, , in J/(mol·K); unlike enthalpies of formation, it is not zero for elements.
Unit 9 · 9.2 -
Standard reduction potential
The voltage, , of a half-reaction written as a reduction under standard conditions, measured against the standard hydrogen electrode (0 V).
Unit 9 · 9.8 -
Standard solution
A solution whose concentration is known accurately, used as a titrant or as a reference for calibration.
Unit 4 · 4.6 -
Standard state
The reference conditions for thermodynamic data: pure substances in their most stable form at 1 atm, solutions at 1 M, usually at 25 °C.
Unit 6 · 6.8 -
State function
A property whose value depends only on the current state of a system, not on how it got there, such as , , and .
Unit 6 · 6.9 -
Stationary phase
The part of a chromatography system that stays in place, such as the paper, silica plate or column packing.
Unit 3 · 3.9 -
Stoichiometry
The calculation of quantities of reactants and products in a chemical reaction, based on mole ratios from the balanced equation.
Unit 4 · 4.5 -
Strong acid
An acid that ionizes essentially completely in water, such as , , , , and (first proton).
Unit 8 · 8.2 -
Strong base
A base that dissociates completely in water to give hydroxide ions, such as the group 1 hydroxides and , , .
Unit 8 · 8.2 -
Sublimation
The direct change of a solid into a gas without passing through the liquid state, as dry ice (solid ) does at room pressure.
Unit 6 · 6.5 -
Subshell
A group of orbitals within a shell that share the same shape and energy, labelled , , or .
Unit 1 · 1.5 -
Substitutional alloy
An alloy in which atoms of one metal replace atoms of a similar size in the lattice of another metal.
Unit 2 · 2.4 -
Supersaturated solution
An unstable solution that contains more dissolved solute than a saturated solution at the same temperature.
Unit 7 · 7.11 -
Surface tension
The resistance of a liquid's surface to being stretched, caused by the net inward pull on surface molecules.
Unit 3 · 3.3 -
Surroundings
Everything outside the system that can exchange energy with it, such as the water in a calorimeter.
Unit 6 · 6.1 -
Synthesis reaction
A reaction in which two or more substances combine to form a single product, such as .
Unit 4 · 4.7 -
System
The part of the universe being studied, such as the reacting chemicals in a flask.
Unit 6 · 6.1 -
Systematic error
An error that shifts every measurement in the same direction, such as a miscalibrated balance or a reagent that is not fully dried.
Unit 1
T
-
T-shaped geometry
A molecular shape from five electron domains with two lone pairs, giving three atoms arranged like the letter T, as in .
Unit 2 · 2.7 -
Temperature
A measure of the average kinetic energy of the particles in a substance.
Unit 6 · 6.3 -
Temperature and K
A temperature change is the only common disturbance that changes the value of : raising temperature increases for endothermic reactions and decreases it for exothermic ones.
Unit 7 · 7.10 -
Temperature dependence of favorability
How the signs of and decide whether is negative at all, some or no temperatures.
Unit 9 · 9.3 -
Tetrahedral geometry
A molecular shape with four atoms around a central atom at the corners of a tetrahedron, with 109.5° bond angles, as in .
Unit 2 · 2.7 -
Theoretical yield
The maximum amount of product that could form from the limiting reactant, calculated by stoichiometry.
Unit 4 · 4.5 -
Thermal energy
The total kinetic energy of the random motion of particles in a sample; it depends on both temperature and amount of matter.
Unit 6 · 6.3 -
Thermal equilibrium
The state reached when two objects in contact have the same temperature, so there is no net heat flow between them.
Unit 6 · 6.3 -
Thermochemistry
The study of the heat energy absorbed or released in chemical reactions and physical changes.
Unit 6 · 6.1 -
Thermodynamically favorable
Describes a process that can proceed without continuous outside intervention, which is the case when .
Unit 9 · 9.3 -
Third law of thermodynamics
The entropy of a perfect crystalline substance at absolute zero (0 K) is zero.
Unit 9 · 9.2 -
Titrant
The solution of known concentration that is added from the buret during a titration.
Unit 4 · 4.6 -
Titration
A lab method in which a solution of known concentration is added from a buret to a measured sample until the reaction is just complete, to find the sample's amount or concentration.
Unit 4 · 4.6 -
Titration curve
A graph of pH against volume of titrant added, showing the buffer region, the equivalence point and the shape that identifies the acid or base.
Unit 8 · 8.5 -
Transition state
The highest-energy arrangement of atoms along a reaction pathway, in which old bonds are partly broken and new bonds partly formed.
Unit 5 · 5.6 -
Trigonal bipyramidal geometry
A molecular shape with five atoms around a central atom: three in a plane at 120° and two above and below at 90°, as in .
Unit 2 · 2.7 -
Trigonal planar geometry
A flat molecular shape with three atoms around a central atom at 120° angles and no lone pairs on the central atom, as in .
Unit 2 · 2.7 -
Trigonal pyramidal geometry
A molecular shape with three atoms and one lone pair around a central atom, forming a pyramid, as in .
Unit 2 · 2.7 -
Triple bond
A covalent bond made of three shared electron pairs: one sigma bond and two pi bonds.
Unit 2 · 2.5
U
-
UV-visible spectroscopy
A technique that measures absorption of ultraviolet or visible light, which promotes electrons to higher energy levels.
Unit 3 · 3.11 -
Uncertainty
The range within which the true value of a measurement is expected to lie, shown by the last significant digit or written as .
Unit 1 -
Unsaturated solution
A solution that contains less dissolved solute than it could hold at that temperature, so more solute can dissolve.
Unit 7 · 7.11
V
-
VSEPR theory
A model that predicts molecular shape by assuming electron domains around a central atom arrange themselves as far apart as possible.
Unit 2 · 2.7 -
Valence electrons
The electrons in an atom's outermost shell, which take part in bonding and determine much of its chemistry.
Unit 1 · 1.8 -
Vapor pressure
The pressure exerted by a vapor in equilibrium with its liquid or solid in a closed container at a given temperature.
Unit 3 · 3.3 -
Viscosity
A liquid's resistance to flow.
Unit 3 · 3.3 -
Volatility
The tendency of a substance to evaporate; volatile substances have weak intermolecular forces and high vapor pressures.
Unit 3 · 3.3 -
Volume and pressure changes at equilibrium
Decreasing the volume of a gaseous equilibrium mixture shifts it toward the side with fewer moles of gas; increasing the volume shifts it toward more moles of gas.
Unit 7 · 7.10 -
Volumetric flask
A flask with a long neck and a single calibration mark, used to prepare a solution of exact total volume.
Unit 3 · 3.7 -
Volumetric pipet
A glass pipet calibrated to deliver one exact volume, such as 10.00 or 25.00 mL, with very small uncertainty.
Unit 3 · 3.7
W
-
Wavelength
The distance between successive peaks of a wave, written and often measured in nanometers.
Unit 3 · 3.11 -
Weak acid
An acid that ionizes only partially in water, so an equilibrium exists between the acid molecules and their ions, described by .
Unit 8 · 8.3 -
Weak base
A base that accepts protons from water only partially, so an equilibrium exists, described by ; ammonia and amines are examples.
Unit 8 · 8.3 -
Weighing by difference
Finding a sample's mass by weighing its container before and after the sample is removed or added, then subtracting.
Unit 1 · 1.1
Z
-
Zero-order reaction
A reaction whose rate does not depend on reactant concentration: , so a plot of against time is a straight line.
Unit 5 · 5.3
P
-
pH
A logarithmic measure of acidity: .
Unit 8 · 8.2 -
pH and solubility
Salts with basic anions, such as hydroxides, carbonates and fluorides, become more soluble as pH decreases.
Unit 7 · 7.13 -
pKa
The negative logarithm of the acid ionization constant, ; a smaller means a stronger acid.
Unit 8 · 8.7 -
pOH
A logarithmic measure of hydroxide concentration: .
Unit 8 · 8.2
S
-
sp hybridization
Mixing of one and one orbital to give two hybrid orbitals 180° apart, found on atoms with two electron domains.
Unit 2 · 2.7 -
sp2 hybridization
Mixing of one and two orbitals to give three hybrid orbitals 120° apart, found on atoms with three electron domains.
Unit 2 · 2.7 -
sp3 hybridization
Mixing of one and three orbitals to give four hybrid orbitals pointing toward the corners of a tetrahedron.
Unit 2 · 2.7
No terms match. Try a shorter word, or browse all terms.
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session