Class pack · 3.13 Beer-Lambert law
One page for students, then the answer key on its own page. Free to print and share.
AP Chemistry · Unit 3: Properties of Substances and Mixtures

3.13 Beer-Lambert law

Name: ______________________   Class: ________   Date: ________
Scan to try 3 questions on your phone
The big idea.

The Beer-Lambert law states that the absorbance of a solution is directly proportional to the concentration of the absorbing species: A=εbcA = \varepsilon b c, where ε\varepsilon is the molar absorptivity, bb is the path length and cc is the molar concentration. In the lab a calibration curve of absorbance versus concentration, measured at the wavelength of maximum absorbance, is used to find an unknown concentration.

The lesson (about 15 minutes)

  1. Explore the simulation: The electromagnetic spectrum:. https://apchemistrytutoring.com/units/3/3-13-beer-lambert-law/#sim-em
  2. Explore the simulation: Spectrophotometer. https://apchemistrytutoring.com/units/3/3-13-beer-lambert-law/#sim-beer
  3. Answer the 5 questions below on your own (about 8 minutes).
  4. Check with the answer key, then scan the QR code for 3 more questions with instant feedback.

Questions

1. A 0.10 M solution has an absorbance of 0.40. In the same cell at the same wavelength, another solution of the same substance has an absorbance of 0.10. What is its concentration?

  1. 0.025 M
  2. 0.40 M
  3. 0.050 M
  4. 0.25 M

2. Besides concentration, which factor directly changes the absorbance reading of a coloured solution at a fixed wavelength?

  1. The temperature of the room
  2. The length of time the solution is exposed to light
  3. The width of the cuvette (path length)
  4. The total volume of solution in the stock bottle

3. A graph of absorbance (y) vs. concentration (x) for a series of standards is a straight line. What is the slope?

  1. The rate at which absorbance changes with time
  2. The molar absorptivity multiplied by the path length, εb
  3. The product of absorbance and concentration
  4. The wavelength of maximum absorbance

4. An absorption spectrum of 0.10 M CoCl₂(aq) shows absorbances of 0.05 at 400 nm, 0.48 at 510 nm, 0.30 at 550 nm and 0.02 at 650 nm. Which wavelength should be used for a Beer's law study?

  1. 400 nm
  2. 510 nm
  3. 550 nm
  4. 650 nm

5. A substance has A = 0.65 in a 1.2 cm cuvette. Its molar absorptivity at that wavelength is 1.3 M⁻¹ cm⁻¹. What is its concentration?

  1. 0.42 M
  2. 0.50 M
  3. 1.0 M
  4. 2.4 M

From AP Chemistry Tutoring: the full lesson, more practice and the simulation at https://apchemistrytutoring.com/units/3/3-13-beer-lambert-law/

Answer key · 3.13 Beer-Lambert law

  1. A. Absorbance is proportional to concentration. The absorbance is one quarter as large, so the concentration is 0.10 ÷ 4 = 0.025 M.
  2. C. A = εbc; b is the path length through the cuvette.
  3. B. A = (εb)c has the form y = mx.
  4. B. 510 nm is λ_max: the largest ε gives the most sensitive measurement.
  5. A. c = 0.65 ÷ (1.3 × 1.2) = 0.42 M.

Students can try 3 more questions with instant feedback at https://apchemistrytutoring.com/start/3/?topic=3.13&n=3&utm_source=class&utm_medium=print&utm_campaign=3.13

Chat on WhatsApp