AP Chemistry · Unit 9: Thermodynamics and Electrochemistry
9.7 Galvanic (voltaic) and electrolytic cells
Name: ______________________ Class: ________ Date: ________
Scan to try 3 questions on your phone
The big idea.
A galvanic (voltaic) cell uses a thermodynamically favorable redox reaction to produce electrical energy, while an electrolytic cell uses an external power source to drive an unfavorable one. In both, oxidation occurs at the anode and reduction at the cathode; electrons flow through the wire from anode to cathode and the salt bridge maintains charge balance. The standard cell potential is .
The lesson (about 15 minutes)
- Explore the simulation: Build a cell. https://apchemistrytutoring.com/units/9/9-7-galvanic-voltaic-and-electrolytic-cells/#sim-cell
- Answer the 5 questions below on your own (about 8 minutes).
- Check with the answer key, then scan the QR code for 3 more questions with instant feedback.
Questions
1. In which direction do electrons flow in a galvanic cell?
- From the anode to the cathode through the wire
- From the cathode to the anode through the wire
- From the anode to the cathode through the salt bridge
- From the cathode to the anode through the salt bridge
2. At which electrode does oxidation occur?
- The anode, in both galvanic and electrolytic cells
- The cathode, in both galvanic and electrolytic cells
- The anode in a galvanic cell and the cathode in an electrolytic cell
- The cathode in a galvanic cell and the anode in an electrolytic cell
3. What is the role of the salt bridge in a galvanic cell?
- It lets ions flow so each half-cell stays electrically neutral.
- It carries electrons from the anode to the cathode.
- It supplies the reactants for the cell reaction.
- It raises the cell voltage.
4. A galvanic cell has a Zn strip in 1.0 M Zn²⁺(aq) and a Cu strip in 1.0 M Cu²⁺(aq). During operation the Zn strip loses mass and the Cu strip gains mass. Which equation represents the cell reaction?
- Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s)
- Zn²⁺(aq) + Cu²⁺(aq) → Zn(s) + Cu(s)
- Zn(s) + Cu(s) → Zn²⁺(aq) + Cu²⁺(aq)
- Zn²⁺(aq) + Cu(s) → Zn(s) + Cu²⁺(aq)
5. A galvanic cell has a Zn strip in 1.0 M Zn²⁺(aq) and a Cu strip in 1.0 M Cu²⁺(aq), joined by a salt bridge containing KNO₃(aq). Which describes the movement of K⁺ ions?
- Toward the Zn half-cell, to neutralise excess negative charge there
- Toward the Cu half-cell, to replace the positive charge lost as Cu²⁺ is reduced
- Toward the Zn half-cell, carrying electrons to the anode
- They do not move; only NO₃⁻ ions move.
From AP Chemistry Tutoring: the full lesson, more practice and the simulation at https://apchemistrytutoring.com/units/9/9-7-galvanic-voltaic-and-electrolytic-cells/