4.1 Introduction for reactions
AP Chemistry Unit 4: Chemical Reactions · 1 simulation · 4 practice questions
Updated · Aligned to the AP Chemistry Course and Exam Description
A chemical reaction rearranges atoms into new substances, and a balanced chemical equation shows this with the same number of each type of atom on both sides, as required by conservation of mass. Coefficients give mole ratios, e.g. . Evidence of a reaction includes gas formation, a precipitate, a color change, or a temperature change.
Physical or chemical?
Physical: same substance, new form.
Chopping vegetables, shredding paper, melting ice, boiling water. is still .
Chemical: a new substance.
Rotting, burning, rusting, digesting. At the particle level, bonds break and new bonds form: H–H and O=O break, O–H bonds form.
Evidence that a reaction happened.
A new gas, like from .
A solid appears when two solutions mix.
Two clear solutions turn pink.
Energy released by new bonds.
Physical or chemical?
? + → + + . Which observation proves a reaction: bubbles, the total volume, a colorless result, or electrical conductivity?Think, then tap to check
Bubbles: gas is a new substance. Both solutions were already colorless and already conducted.
?Water bubbles at 100 °C. Which gas in the bubbles would support "physical change"?Think, then tap to check
: same substance, new state. or would mean water decomposed, a chemical change.
Study notes
Key concepts
Physical change (TRA-1.A.1). A physical change alters the properties of a substance but not its composition. The particles before and after are the same particles. The two most common examples are:
-
Changes of phase: melting, freezing, boiling, condensing, subliming, depositing. For example, H₂O(s) → H₂O(l). Every particle is still an H₂O molecule.
-
Forming or separating mixtures: dissolving sugar in water, mixing two gases, filtering sand out of water, distilling ethanol from water, chromatography.
Chemical change (TRA-1.A.2). A chemical change turns substances into new substances, usually with a different composition. Atoms are rearranged into new combinations. For example, 2H₂(g) + O₂(g) → 2H₂O(l). The H₂ and O₂ molecules are gone; new H₂O molecules exist.
Evidence that a chemical change may have happened. The CED lists four kinds of evidence. Each one is evidence, not proof, because a physical change can sometimes produce the same observation.
| Observation | Example of a chemical change | A physical change that can look similar |
|---|---|---|
| Heat or light produced | Burning magnesium gives a bright white light | A light bulb glows; water releases heat as it freezes |
| A gas forms (bubbles) | Zinc in hydrochloric acid gives H₂ bubbles | Boiling water gives bubbles of H₂O(g) |
| A precipitate (solid) forms when two solutions are mixed | Mixing Pb(NO₃)₂(aq) and KI(aq) gives yellow PbI₂(s) | Cooling a saturated solution makes crystals of the same solute |
| A colour change | Copper metal in AgNO₃(aq): the solution turns blue as Cu²⁺ forms | Diluting a coloured solution makes it paler |
How to decide. Ask: "Are the particles at the end the same particles that I started with?" If yes, it is physical. If new particles with new formulas are present, it is chemical. Observations help you guess; the particle-level answer is the real test.
Common misconceptions
-
"A change of state is chemical because energy is involved." No. Energy is involved in both kinds of change.
-
"If it is reversible, it is physical." Not always. Many chemical changes can be reversed (for example, charging a rechargeable battery), and some physical changes are hard to reverse.
-
"Dissolving is always physical." Dissolving a molecular solid such as sugar is physical. Dissolving an ionic solid breaks ionic bonds, so it can be argued either way (see 4.4). Dissolving a metal in acid is chemical, because new substances (metal ions and H₂ gas) form.
Worked examples
Worked example 4.1-A. A student adds a strip of zinc metal to a beaker of blue copper(II) sulfate solution. After ten minutes the strip is coated with a red-brown solid, the solution is paler blue, and the beaker feels warm. Identify the evidence and decide what type of change occurred.
Solution
Evidence: (1) a colour change: the blue colour, caused by Cu²⁺(aq), fades; (2) a new solid appears: the red-brown solid is copper metal; (3) heat is produced. The new solid has a different composition from anything that was added (zinc is grey, not red-brown), so new substances have formed. This is a chemical change: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s).
Worked example 4.1-B. A student heats a beaker of water and sees bubbles. A second student adds a seltzer tablet to cold water and sees bubbles. Explain why the same observation (bubbles) leads to different conclusions.
Solution
In the boiling water, the bubbles are H₂O(g), which has the same composition as H₂O(l), so only a phase change happened (physical). In the seltzer tablet, the bubbles are CO₂(g), a substance that was not present before; it was made when HCO₃⁻ reacted with an acid in the tablet (chemical). The observation is the same, but the identity of the gas decides the type of change.
Unit 4 study guide: exam-style free-response set, worksheet and answers.
Worked example
- Carbon: 3 C on the left, so put 3 in front of .
- Hydrogen: 8 H on the left, so put 4 in front of .
- Oxygen: O atoms on the right, so put 5 in front of .
- Answer:
Free-response practice
Write your answer first, then open the solution and mark yourself against it.
FRQ 4.1-1. A student places a piece of chalk (calcium carbonate) in vinegar (a dilute solution of acetic acid). Bubbles form on the surface of the chalk and the chalk slowly gets smaller.
(a) Identify the type of change (physical or chemical). Justify your answer using the observation.
(b) The student says the change could be physical, because sugar also "gets smaller" when placed in water. Explain how the student could test whether a new substance is produced.
(c) Write a balanced molecular equation for the reaction. The products are calcium acetate, water and carbon dioxide.
Show the solution
(a) Chemical change (1 point). A gas forms at room temperature from a solid placed in a liquid that is not boiling, so the gas is a new substance (CO₂) that was not present in the chalk or the vinegar.
(b) Any valid test (1 point), for example: collect the gas and bubble it through limewater, Ca(OH)₂(aq); it turns cloudy, showing CO₂ is present. Or: evaporate the liquid afterwards; the solid left behind (calcium acetate) has different properties from chalk (for example, it is soluble in water). Dissolved sugar, in contrast, gives back sugar when the water is evaporated and produces no gas.
(c) CaCO₃(s) + 2HC₂H₃O₂(aq) → Ca(C₂H₃O₂)₂(aq) + H₂O(l) + CO₂(g) (1 point for correct formulas and balancing).
Common mistake
Students change subscripts to balance an equation, for example writing instead of . Changing a subscript changes the identity of the substance; only coefficients may change.
Frequently asked questions
?Why can't you change subscripts when balancing equations?
Subscripts define the formula of a substance; changing them describes a different substance. Coefficients change only how many units react.
?What are signs that a chemical reaction happened?
Common evidence includes bubbles of gas, a precipitate, a color change, light, or a temperature change, though some physical changes show similar signs.
Practice questions on 4.1
- Q1Which of the following is best described as a physical change?
- Q2Which observation, on its own, gives the strongest evidence that a chemical reaction has occurred when two clear, colourless solutions are mixed?
- Q3Which equation represents a physical change?
- Q4A student says, "Boiling water must be a chemical change because bubbles of gas are formed." Which statement best corrects the student?
Terms used in this topic
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session