Unit 4 study guide: Chemical Reactions
Unit 4 is about what happens when substances change. You will learn to tell physical changes from chemical changes, to write balanced molecular, complete ionic and net ionic equations, to draw reactions as particle pictures, and to use balanced equations to calculate amounts (stoichiometry), including titrations. You will also learn to sort reactions into three big families: acid–base (proton transfer), oxidation–reduction (electron transfer) and precipitation (an insoluble solid forms). The unit ends with balancing redox equations using half-reactions. The College Board gives Unit 4 an exam weighting of 7–9% of the multiple-choice section, but its skills (balancing, net ionic equations, mole calculations) appear in almost every free-response question on the exam. The CED topics are 4.1 Introduction for Reactions, 4.2 Net Ionic Equations, 4.3 Representations of Reactions, 4.4 Physical and Chemical Changes, 4.5 Stoichiometry, 4.6 Introduction to Titration, 4.7 Types of Chemical Reactions, 4.8 Introduction to Acid–Base Reactions and 4.9 Oxidation–Reduction (Redox) Reactions.
Topic notes
Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.
- 4.1 Introduction for reactionsNotes · free response · 4 questions
- 4.2 Net ionic equationsNotes · free response · 15 questions
- 4.3 Representations of reactionsNotes · free response · 13 questions
- 4.4 Physical and chemical changesNotes · free response · 15 questions
- 4.5 StoichiometryNotes · free response · 25 questions
- 4.6 Introduction to titrationNotes · free response · 13 questions
- 4.7 Types of chemical reactionsNotes · free response · 12 questions
- 4.8 Introduction to acid-base reactionsNotes · free response · 19 questions
- 4.9 Oxidation-reduction (redox) reactionsNotes · free response · 23 questions
Exam-style free-response set
Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.
FRQ U4-1 (long, 10 points). Modelled on 2014 AP FRQ Q1.
A student is asked to find the iodide content of tablets that contain KI and an inert, water-soluble sugar filler. One tablet is dissolved in 50.0 mL of distilled water, and an excess of 0.20 M Pb(NO₃)₂(aq) is added. A yellow precipitate forms. It is filtered, washed and dried. The data are shown below.
| Measurement | Mass (g) |
|---|---|
| Mass of KI tablet | 0.500 |
| Mass of dry filter paper | 1.462 |
| Filter paper + precipitate after first drying | 1.869 |
| Filter paper + precipitate after second drying | 1.825 |
| Filter paper + precipitate after third drying | 1.824 |
(a) (i) Write the balanced net ionic equation for the precipitation. (ii) Explain why a net ionic equation is the best representation of this reaction.
(b) Explain why the filter paper and precipitate were dried and weighed three times.
(c) In the filtrate, is [K⁺] greater than, less than, or equal to [NO₃⁻]? Justify your answer.
(d) Calculate the number of moles of precipitate formed.
(e) Calculate the mass percent of iodide in the tablet.
(f) In a second trial the student dissolves an identical tablet in 60.0 mL of water instead of 50.0 mL. Predict whether the calculated mass percent of iodide will be greater than, less than, or equal to the value in (e). Justify your answer.
(g) In a third trial the student weighs the precipitate after only the first drying. Will the calculated mass percent of iodide be too high, too low or unaffected? Justify your answer.
Show the solution
(a)(i) Pb²⁺(aq) + 2I⁻(aq) → PbI₂(s). (1 point)
(a)(ii) K⁺ and NO₃⁻ are spectator ions; they stay dissolved and do not change. The net ionic equation shows only the ions that form the precipitate. (1 point)
(b) To dry the precipitate to constant mass, so that all the water has been removed. The second and third masses agree (1.825 g and 1.824 g), so the solid is dry. (1 point)
(c) Less than. All the K⁺ came from KI, so moles K⁺ = moles I⁻. Pb(NO₃)₂ was added in excess, so more than enough NO₃⁻ was added: more than 2 NO₃⁻ for every Pb²⁺ that reacted with 2 I⁻. Both ions are in the same volume, so [K⁺] < [NO₃⁻]. (1 point)
(d) Mass PbI₂ = 1.824 − 1.462 = 0.362 g. Molar mass PbI₂ = 207.2 + 2(126.90) = 461.0 g/mol. Moles = 0.362 ÷ 461.0 = 7.85 × 10⁻⁴ mol. (1 point for mass, 1 point for moles)
(e) Moles I⁻ = 2 × 7.85 × 10⁻⁴ = 1.570 × 10⁻³ mol. Mass I⁻ = 1.570 × 10⁻³ × 126.90 = 0.199 g. Mass percent = 0.199 ÷ 0.500 × 100% = 39.9%. (1 point for mole ratio, 1 point for answer)
(f) Equal. The volume of water does not change the moles of I⁻ in the tablet, and an excess of Pb²⁺ still precipitates all of it, so the same mass of PbI₂ forms. (1 point)
(g) Too high. Using 1.869 g gives a precipitate mass of 0.407 g, which includes water. The calculated moles of PbI₂, and so of I⁻, are too large. (1 point)
Point allocation: (a) 2, (b) 1, (c) 1, (d) 2, (e) 2, (f) 1, (g) 1 = 10 points.
FRQ U4-2 (long, 10 points). Modelled on 2018 AP FRQ Q1 (parts on oxidation number, solution preparation and limiting reactant).
Sodium thiosulfate reacts with sodium hypochlorite in basic solution:
Na₂S₂O₃(aq) + 4NaOCl(aq) + 2NaOH(aq) → 2Na₂SO₄(aq) + 4NaCl(aq) + H₂O(l)
(a) Determine the oxidation number of Cl in NaOCl and in NaCl.
(b) Identify the element that is oxidised. Justify your answer.
(c) Calculate the mass of Na₂S₂O₃ (molar mass 158.1 g/mol) needed to prepare 250.0 mL of 0.400 M Na₂S₂O₃(aq).
(d) Briefly describe how the solution in (c) should be prepared in the laboratory.
A student mixes the following solutions.
| Solution | Concentration (M) | Volume (mL) |
|---|---|---|
| Na₂S₂O₃(aq) | 0.400 | 10.00 |
| NaOCl(aq) | 0.400 | 10.00 |
| NaOH(aq) | 0.400 | 10.00 |
(e) Identify the limiting reactant. Justify your answer with calculations.
(f) Calculate the number of moles of Na₂S₂O₃ that remain after the reaction is complete.
(g) Write the balanced net ionic equation for the reaction.
(h) How many moles of electrons are transferred per mole of reaction as written?
Show the solution
(a) NaOCl: +1 + Cl + (−2) = 0, Cl = +1. NaCl: Cl = −1. (1 point)
(b) Sulfur. Its oxidation number rises from +2 in S₂O₃²⁻ (2S + 3(−2) = −2) to +6 in SO₄²⁻. An increase in oxidation number is oxidation. (1 point)
(c) Moles = 0.400 × 0.2500 = 0.1000 mol. Mass = 0.1000 × 158.1 = 15.8 g. (1 point)
(d) Weigh 15.8 g of Na₂S₂O₃ on an analytical balance, transfer to a 250.0 mL volumetric flask, dissolve in some distilled water, then add distilled water up to the calibration mark, stopper and invert to mix. (1 point)
(e) Each solution contains 0.400 × 0.01000 = 4.00 × 10⁻³ mol. Divide by coefficients: Na₂S₂O₃ 4.00 × 10⁻³ ÷ 1 = 4.00 × 10⁻³; NaOCl 4.00 × 10⁻³ ÷ 4 = 1.00 × 10⁻³; NaOH 4.00 × 10⁻³ ÷ 2 = 2.00 × 10⁻³. NaOCl gives the smallest value, so NaOCl is limiting. (1 point for moles, 1 point for conclusion)
(f) Na₂S₂O₃ used = 4.00 × 10⁻³ ÷ 4 = 1.00 × 10⁻³ mol. Remaining = 4.00 × 10⁻³ − 1.00 × 10⁻³ = 3.00 × 10⁻³ mol. (1 point)
(g) S₂O₃²⁻(aq) + 4OCl⁻(aq) + 2OH⁻(aq) → 2SO₄²⁻(aq) + 4Cl⁻(aq) + H₂O(l). Na⁺ is the spectator. (2 points: 1 for correct species, 1 for balancing)
(h) 8 mol e⁻. Two S atoms each change from +2 to +6 (2 × 4 = 8 lost), and four Cl atoms each change from +1 to −1 (4 × 2 = 8 gained). (1 point)
Point allocation: (a) 1, (b) 1, (c) 1, (d) 1, (e) 2, (f) 1, (g) 2, (h) 1 = 10 points.
FRQ U4-3 (short, 4 points). Modelled on 2019 AP FRQ Q3.
A student has 25.0 mL of a K₂CO₃ solution of unknown concentration. She adds excess 1.0 M CaCl₂(aq), and CaCO₃ (molar mass 100.09 g/mol) precipitates. After filtering and drying, she collects 0.612 g of CaCO₃.
(a) Write the net ionic equation for the reaction.
(b) Calculate the molarity of the original K₂CO₃ solution.
(c) The student realises that the precipitate was not completely dry. She claims that her calculated K₂CO₃ molarity is too low. Do you agree? Justify your answer.
(d) The filtrate is tested with a conductivity tester. Predict whether the bulb lights brightly. Justify your answer.
Show the solution
(a) Ca²⁺(aq) + CO₃²⁻(aq) → CaCO₃(s). (1 point)
(b) Moles CaCO₃ = 0.612 ÷ 100.09 = 6.11 × 10⁻³ mol = moles CO₃²⁻ = moles K₂CO₃. Molarity = 6.11 × 10⁻³ ÷ 0.0250 = 0.245 M. (1 point)
(c) Disagree. Water left in the solid makes the measured mass too large, so the calculated moles of CaCO₃, and therefore the K₂CO₃ molarity, are too high, not too low. (1 point)
(d) Yes, it lights brightly. The filtrate still contains many dissolved ions (K⁺, Cl⁻ and the excess Ca²⁺) that can move and carry charge. (1 point)
FRQ U4-4 (short, 4 points). Modelled on 2021 AP FRQ Q3(a)–(c).
To find the concentration of a ZnSO₄ solution, a student adds 30.0 mL of 0.150 M BaCl₂ to 40.0 mL of the ZnSO₄(aq). A white precipitate forms. After filtering and drying overnight: mass of dry filter paper 0.764 g; mass of filter paper and dried precipitate 1.277 g.
(a) Write a balanced net ionic equation for the precipitation reaction.
(b) Calculate the number of moles of precipitate formed (molar mass of BaSO₄ = 233.39 g/mol).
(c) Calculate the molarity of the original ZnSO₄ solution.
(d) Show that Ba²⁺ was in excess.
Show the solution
(a) Ba²⁺(aq) + SO₄²⁻(aq) → BaSO₄(s). (1 point)
(b) Mass = 1.277 − 0.764 = 0.513 g. Moles = 0.513 ÷ 233.39 = 2.20 × 10⁻³ mol. (1 point)
(c) Moles SO₄²⁻ = 2.20 × 10⁻³ mol = moles ZnSO₄. Molarity = 2.20 × 10⁻³ ÷ 0.0400 = 0.0550 M. (1 point)
(d) Ba²⁺ added = 0.150 × 0.0300 = 4.50 × 10⁻³ mol, which is more than the 2.20 × 10⁻³ mol of SO₄²⁻ precipitated, so Ba²⁺ was in excess and all the sulfate precipitated. (1 point)
FRQ U4-5 (short, 4 points). Modelled on CED sample FRQ 2(a)–(c).
White phosphorus, P₄(s), burns in oxygen to form P₄O₁₀(s).
(a) Write the balanced equation for the combustion.
(b) Calculate the volume of O₂(g), measured at 1.00 atm and 298 K, needed to burn 100.0 g of P₄ completely.
(c) A student claims that the combustion of P₄ is a redox reaction. Justify the claim using the oxidation numbers of P and O before and after the reaction.
Show the solution
(a) P₄(s) + 5O₂(g) → P₄O₁₀(s). (1 point)
(b) Molar mass P₄ = 4 × 30.97 = 123.88 g/mol. Moles P₄ = 100.0 ÷ 123.88 = 0.8072 mol. Moles O₂ = 5 × 0.8072 = 4.036 mol. V = nRT/P = (4.036)(0.08206)(298)/1.00 = 98.7 L. (1 point for moles O₂, 1 point for volume)
(c) Before: P = 0 (element), O = 0 (element). After, in P₄O₁₀: O = −2, so 4P + 10(−2) = 0 and P = +5. P is oxidised (0 → +5) and O is reduced (0 → −2), so electrons are transferred: it is a redox reaction. (1 point)
Exam-style multiple choice
18 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.
- Q1Which technique is most appropriate for recovering solid NaCl from an aqueous solution of NaCl?
- Q2A white precipitate forms when 0.5 M Na₂SO₄(aq) is added to a 0.5 M solution of which of the following ions?
- Q3100. mL of 0.50 M Na₃PO₄ is mixed with 100. mL of 1.2 M AgNO₃. A yellow precipitate of Ag₃PO₄ forms and [Ag⁺] becomes negligible. Which lists the remaining ions in order of increasing concentration?
- Q4Which reaction is one in which the same element is both oxidised and reduced?
- Q5Which is acceptable laboratory practice in a titration?
- Q6When the equation for the complete combustion of hexane, C₆H₁₄, is balanced with the lowest whole-number coefficients, the coefficient of O₂ is
- Q7What is the net ionic equation for the reaction of aqueous ammonia with acetic acid?
- Q8What mass of BaSO₄ (233.39 g/mol) can form when 40.0 mL of 0.200 M BaCl₂ is mixed with excess Na₂SO₄(aq)?
- Q9A 0.315 g sample of oxalic acid, H₂C₂O₄ (90.04 g/mol), a diprotic acid, is titrated with NaOH(aq). The equivalence point is reached after 24.60 mL. What is [NaOH]?
- Q10What is the average oxidation number of sulfur in the tetrathionate ion, S₄O₆²⁻?
- Q11Which species cannot act as a Brønsted–Lowry base?
- Q12When Cr₂O₇²⁻ + Fe²⁺ → Cr³⁺ + Fe³⁺ is balanced in acidic solution with lowest whole-number coefficients, the coefficient of Fe²⁺ is
- Q13Which reaction is an acid–base reaction?
- Q1410.0 g of CaCO₃ reacts with excess HCl: CaCO₃(s) + 2HCl(aq) → CaCl₂(aq) + H₂O(l) + CO₂(g). What volume of CO₂ forms at 0 °C and 1.00 atm?
- Q15A student slowly adds 0.10 M H₂SO₄ to 0.10 M Ba(OH)₂ while measuring the electrical conductivity. The conductivity falls almost to zero at the equivalence point. Which equation best explains this?
- Q165.00 g of Fe₂O₃ is reduced by excess CO: Fe₂O₃ + 3CO → 2Fe + 3CO₂. 3.12 g of Fe is collected. What is the percent yield?
- Q17A student places CaCO₃ chips in HCl(aq) in an open beaker on a balance. Which statement explains why the balance reading decreases during the reaction?
- Q18A "before" diagram shows 6 CH₄ molecules and 10 O₂ molecules. They react: CH₄ + 2O₂ → CO₂ + 2H₂O. What does the "after" diagram contain?
Unit 4 worksheet
Work these on paper. Show all working for calculations and use correct significant figures.
-
Classify each as a physical or chemical change, and give the particle-level reason: (a) dry ice subliming; (b) bread toasting; (c) salt water being distilled; (d) a silver spoon tarnishing (turning black); (e) sugar dissolving in tea.
-
List four observations that can be evidence of a chemical change. For one of them, describe a physical change that would give the same observation.
-
Write the molecular, complete ionic and net ionic equations for the reaction of aqueous barium chloride with aqueous sodium sulfate. Name the spectator ions.
-
Write the net ionic equation for hydrochloric acid reacting with aqueous ammonia.
-
Write the net ionic equation for acetic acid reacting with potassium hydroxide solution.
-
Write the net ionic equation for solid magnesium hydroxide reacting with hydrochloric acid.
-
Zinc metal is placed in copper(II) sulfate solution. (a) Write the net ionic equation. (b) Give the oxidation number of each element before and after. (c) Which species is oxidised?
-
Assign oxidation numbers: N in NH₄⁺, NO₂⁻, N₂O₅ and HNO₃; S in S₂O₃²⁻; Mn in MnO₄²⁻; C in C₂O₄²⁻; Cr in CrO₄²⁻; O in H₂O₂.
-
Balance: C₃H₈ + O₂ → CO₂ + H₂O. Then give the oxidation number of C before and after.
-
4.25 g of NH₃ is mixed with 6.40 g of O₂: 4NH₃ + 5O₂ → 4NO + 6H₂O. Identify the limiting reactant and calculate the theoretical mass of NO.
-
In the reaction of question 10, 3.85 g of NO is collected. Calculate the percent yield.
-
2KClO₃(s) → 2KCl(s) + 3O₂(g). Calculate the volume of O₂ produced from 2.45 g of KClO₃ at 25 °C and 0.950 atm.
-
What volume of 0.150 M Na₂SO₄ is needed to precipitate all the Ba²⁺ from 40.0 mL of 0.200 M BaCl₂? What mass of BaSO₄ forms?
-
A student titrates 25.00 mL of HCl with 0.1050 M NaOH. Buret readings (initial, final, in mL): trial 1 (0.50, 23.35); trial 2 (23.35, 46.10); trial 3 (1.20, 24.00). Find the mean titre and [HCl].
-
0.250 g of oxalic acid, H₂C₂O₄ (diprotic, 90.04 g/mol), needs 21.40 mL of NaOH to reach the equivalence point. Find [NaOH].
-
A 0.500 g iron ore sample is dissolved and all the iron converted to Fe²⁺. Titration needs 22.40 mL of 0.0200 M KMnO₄ (MnO₄⁻ + 5Fe²⁺ + 8H⁺ → Mn²⁺ + 5Fe³⁺ + 4H₂O). Find the mass percent of Fe.
-
Identify the acid, base, conjugate acid and conjugate base: HSO₄⁻(aq) + CO₃²⁻(aq) ⇌ SO₄²⁻(aq) + HCO₃⁻(aq).
-
Write two equations that show water acting as (a) an acid and (b) a base.
-
Balance in acidic solution: MnO₄⁻ + Fe²⁺ → Mn²⁺ + Fe³⁺.
-
Balance in acidic solution (breathalyser reaction): Cr₂O₇²⁻ + C₂H₅OH → Cr³⁺ + CH₃COOH.
-
Balance in basic solution: MnO₄⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻.
-
Balance in basic solution: Zn + NO₃⁻ → Zn(OH)₄²⁻ + NH₃.
-
A "before" box contains 6 H₂ molecules and 4 O₂ molecules. Describe the "after" box for 2H₂ + O₂ → 2H₂O(g), and name the limiting reactant.
-
A "before" box contains 4 N₂ and 9 H₂ molecules. Describe the "after" box for N₂ + 3H₂ → 2NH₃.
-
Different volumes of 0.100 M Pb(NO₃)₂ are added to separate 50.0 mL samples of a KI solution. The dried PbI₂ is weighed.
| Volume of Pb(NO₃)₂ added (mL) | Mass of PbI₂ (g) |
|---|---|
| 10.0 | 0.461 |
| 20.0 | 0.922 |
| 30.0 | 1.383 |
| 40.0 | 1.844 |
| 50.0 | 1.844 |
| 60.0 | 1.844 |
(a) Explain why the mass stops increasing. (b) What volume of Pb(NO₃)₂ is needed to reach the equivalence point? (c) Calculate [KI].
-
A student says, "Dissolving NaCl in water is a physical change." Give one argument that supports the claim and one that opposes it, in terms of the interactions broken and formed.
-
A student dries a precipitate and weighs it three times: 1.869 g, 1.825 g, 1.824 g. Explain what the data show and which mass should be used.
-
0.10 M H₂SO₄ is added slowly to Ba(OH)₂(aq) while the conductivity is measured. Describe and explain how the conductivity changes before, at, and after the equivalence point.
Show the answer key
-
(a) Physical: CO₂(s) → CO₂(g), same molecules, only intermolecular forces overcome. (b) Chemical: carbohydrates decompose to new substances (browning, new smell). (c) Physical: separation of a mixture; water and salt are unchanged. (d) Chemical: silver reacts (with sulfur compounds) to form black Ag₂S, a new substance. (e) Physical: sugar molecules stay intact; only intermolecular attractions change.
-
Heat or light produced; gas formed; precipitate formed; colour change. Example: bubbles also form when water boils (physical), because the gas is H₂O.
-
Molecular: BaCl₂(aq) + Na₂SO₄(aq) → BaSO₄(s) + 2NaCl(aq). Complete ionic: Ba²⁺ + 2Cl⁻ + 2Na⁺ + SO₄²⁻ → BaSO₄(s) + 2Na⁺ + 2Cl⁻. Net ionic: Ba²⁺(aq) + SO₄²⁻(aq) → BaSO₄(s). Spectators: Na⁺, Cl⁻.
-
H⁺(aq) + NH₃(aq) → NH₄⁺(aq) (or H₃O⁺ + NH₃ → NH₄⁺ + H₂O).
-
HC₂H₃O₂(aq) + OH⁻(aq) → C₂H₃O₂⁻(aq) + H₂O(l).
-
Mg(OH)₂(s) + 2H⁺(aq) → Mg²⁺(aq) + 2H₂O(l).
-
(a) Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s). (b) Zn 0 → +2; Cu +2 → 0 (S +6 and O −2 in the spectator SO₄²⁻ do not change). (c) Zn is oxidised.
-
NH₄⁺: −3; NO₂⁻: +3; N₂O₅: +5; HNO₃: +5; S in S₂O₃²⁻: +2; Mn in MnO₄²⁻: +6; C in C₂O₄²⁻: +3; Cr in CrO₄²⁻: +6; O in H₂O₂: −1.
-
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O. C: 3C + 8(+1) = 0, so C = −8/3 (average) before; +4 after.
-
NH₃: 4.25 ÷ 17.03 = 0.2496 mol; O₂: 6.40 ÷ 32.00 = 0.2000 mol. NH₃ needs 0.3120 mol O₂, so O₂ is limiting. NO = 0.2000 × 4/5 = 0.1600 mol × 30.01 = 4.80 g.
-
3.85 ÷ 4.80 × 100% = 80.2%.
-
KClO₃: 2.45 ÷ 122.55 = 0.01999 mol; O₂ = 0.01999 × 3/2 = 0.02999 mol. V = (0.02999)(0.08206)(298.15)/0.950 = 0.772 L.
-
Ba²⁺ = 0.200 × 0.0400 = 8.00 × 10⁻³ mol = SO₄²⁻ needed. V = 8.00 × 10⁻³ ÷ 0.150 = 0.0533 L = 53.3 mL. BaSO₄ = 8.00 × 10⁻³ × 233.39 = 1.87 g.
-
Titres 22.85, 22.75, 22.80 mL; mean 22.80 mL. [HCl] = (0.1050 × 0.02280) ÷ 0.02500 = 0.09576 M.
-
Acid = 0.250 ÷ 90.04 = 2.777 × 10⁻³ mol; NaOH = 5.553 × 10⁻³ mol; [NaOH] = 5.553 × 10⁻³ ÷ 0.02140 = 0.259 M.
-
MnO₄⁻ = 0.0200 × 0.02240 = 4.48 × 10⁻⁴ mol; Fe²⁺ = 2.24 × 10⁻³ mol; mass Fe = 0.125 g; 25.0%.
-
Acid HSO₄⁻; base CO₃²⁻; conjugate base SO₄²⁻; conjugate acid HCO₃⁻.
-
(a) NH₃ + H₂O ⇌ NH₄⁺ + OH⁻ (water donates H⁺). (b) HCl + H₂O → H₃O⁺ + Cl⁻ (water accepts H⁺).
-
MnO₄⁻ + 5Fe²⁺ + 8H⁺ → Mn²⁺ + 5Fe³⁺ + 4H₂O.
-
Half-reactions: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O (× 2); C₂H₅OH + H₂O → CH₃COOH + 4H⁺ + 4e⁻ (× 3). Overall: 2Cr₂O₇²⁻ + 3C₂H₅OH + 16H⁺ → 4Cr³⁺ + 3CH₃COOH + 11H₂O.
-
Acidic: 2MnO₄⁻ + 3SO₃²⁻ + 2H⁺ → 2MnO₂ + 3SO₄²⁻ + H₂O. Basic: 2MnO₄⁻ + 3SO₃²⁻ + H₂O → 2MnO₂ + 3SO₄²⁻ + 2OH⁻.
-
Zn + 4H₂O → Zn(OH)₄²⁻ + 4H⁺ + 2e⁻ (× 4); NO₃⁻ + 9H⁺ + 8e⁻ → NH₃ + 3H₂O. Acidic sum: 4Zn + NO₃⁻ + 13H₂O → 4Zn(OH)₄²⁻ + NH₃ + 7H⁺. Basic: 4Zn + NO₃⁻ + 6H₂O + 7OH⁻ → 4Zn(OH)₄²⁻ + NH₃.
-
6 H₂O molecules and 1 O₂ molecule; H₂ is limiting.
-
6 NH₃ molecules and 1 N₂ molecule; H₂ is limiting.
-
(a) After 40.0 mL, all the I⁻ has been precipitated; extra Pb²⁺ has nothing to react with (I⁻ becomes limiting). (b) 40.0 mL. (c) PbI₂ = 1.844 ÷ 461.0 = 4.00 × 10⁻³ mol; I⁻ = 8.00 × 10⁻³ mol; [KI] = 8.00 × 10⁻³ ÷ 0.0500 = 0.160 M.
-
Supports: no new substance forms; Na⁺ and Cl⁻ are present before and after; evaporation gives back NaCl. Opposes: ionic bonds in the lattice are broken and new ion–dipole interactions with water are formed.
-
The mass fell from 1.869 g to 1.825 g because water was still evaporating; the last two values agree within 0.001 g, so constant mass has been reached. Use 1.824 g.
-
Before: conductivity is high (Ba²⁺, OH⁻ ions) and falls as Ba²⁺ + SO₄²⁻ → BaSO₄(s) and H⁺ + OH⁻ → H₂O remove ions. At equivalence: conductivity is near zero; almost no ions remain. After: conductivity rises again because the excess acid adds H⁺ and SO₄²⁻ ions, which stay dissolved.
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session