8.8 Properties of buffers

AP Chemistry Unit 8: Acids and Bases · 17 practice questions

Updated · Aligned to the AP Chemistry Course and Exam Description

The short answer

A buffer is a solution of a weak acid and its conjugate base (or a weak base and its conjugate acid) in significant amounts that resists changes in pH. Added strong acid is consumed by the base component, AX−+HX3OX+→HA+HX2O\ce{A- + H3O+ -> HA + H2O}, and added strong base is consumed by the acid component, HA+OHX−→AX−+HX2O\ce{HA + OH- -> A- + H2O}, so the ratio [AX−]/[HA][\ce{A-}]/[\ce{HA}] and the pH change only slightly.

04
Topics 8.8 · 8.9

Buffers

A weak acid and its conjugate base, together.

Add OHX−\ce{OH-} and the HA\ce{HA} eats it. Add HX+\ce{H+} and the AX−\ce{A-} eats it. So the pH barely moves. Strong acid + strong base never makes a buffer.

pH=pKa+log⁡[AX−][HA]\mathrm{pH} = \mathrm{p}K_a + \log\dfrac{\ce{[A-]}}{\ce{[HA]}}

Henderson–Hasselbalch. Both are in the same solution, so you can use moles instead of molarity.

Test

100 mL acetate buffer vs water

Worked example

500 mL of 0.20 M HCl\ce{HCl} + 400 mL of 0.40 M CNX−\ce{CN-} (KaK_a of HCN=5×10−10\ce{HCN} = 5 \times 10^{-10}). pH?

  1. HX+\ce{H+}: 0.100 mol. CNX−\ce{CN-}: 0.160 mol. HX++CNX−→HCN\ce{H+ + CN- -> HCN} goes to completion.
  2. HX+\ce{H+} limiting: left with 0.060 mol CNX−\ce{CN-} and 0.100 mol HCN\ce{HCN}: a buffer.
  3. pKa=−log⁡(5×10−10)=9.30\mathrm{p}K_a = -\log(5 \times 10^{-10}) = 9.30.
  4. pH=9.30+log⁡0.0600.100=9.08\mathrm{pH} = 9.30 + \log\dfrac{0.060}{0.100} = 9.08
?X: 0.1 M NaOH\ce{NaOH} + 0.1 M HBr\ce{HBr} (equal volumes). Y: NaBr\ce{NaBr} solution + 0.1 M HBr\ce{HBr} (equal volumes). Z: equal moles of CHX3COOH\ce{CH3COOH} and CHX3COONa\ce{CH3COONa}. Rank by pH, lowest first.Think, then tap to check

Y < Z < X. Y: [HX+]=0.05 M\ce{[H+]} = 0.05\ \mathrm{M}, pH 1.3. Z: buffer at pH=pKa=4.74\mathrm{pH} = \mathrm{p}K_a = 4.74. X: neutralized, pH 7.

Topic 8.8 in depth

Study notes

Key concepts

What a buffer is (SAP-10.B.1). A buffer is a solution that resists changes in pH when small amounts of acid or base are added. It contains large concentrations of both members of a conjugate acid–base pair: a weak acid and its conjugate base (for example CH₃COOH and CH₃COO⁻) or a weak base and its conjugate acid (NH₃ and NH₄⁺).

How a buffer works. Each component neutralises one kind of added reagent:

  • The conjugate base reacts with added strong acid: CH₃COO⁻(aq) + H₃O⁺(aq) → CH₃COOH(aq) + H₂O(l)
  • The weak acid reacts with added strong base: CH₃COOH(aq) + OH⁻(aq) → CH₃COO⁻(aq) + H₂O(l)

Both reactions go essentially to completion. The added H₃O⁺ or OH⁻ is converted into the weak acid or weak base already present, which ionizes only slightly. The ratio [A⁻]/[HA] changes only a little, so the pH changes only a little (see 8.9 for the quantitative link). On the AP Exam, when asked "explain why the pH changes only slightly", you must write the relevant net ionic equation and state that the added H₃O⁺ (or OH⁻) is consumed by a buffer component.

Illustration (not assessed numerically on the exam). Add 1.0 mL of 1.0 M HCl (1.0 × 10⁻³ mol) to 100. mL of each liquid:

Starting liquid (100. mL) Starting pH pH after adding 1.0 × 10⁻³ mol HCl Change
Pure water 7.00 2.00 −5.00
0.10 M CH₃COOH / 0.10 M CH₃COONa 4.74 4.66 −0.08

What is not a buffer.

  • A strong acid with its salt (HCl + NaCl): Cl⁻ is far too weak a base to consume added H₃O⁺, and there is no weak acid to consume OH⁻.
  • A strong base with anything (NaOH + NH₃): both are bases; nothing can react with added OH⁻.
  • A weak acid alone (only HA): there is no significant A⁻ to react with added acid.
  • A weak acid with a strong base where the base is in excess or equal: all HA has been used up.

Three ways to prepare a buffer.

  1. Mix a weak acid and a soluble salt of its conjugate base (HNO₂ + NaNO₂), or a weak base and a salt of its conjugate acid (NH₃ + NH₄Cl).
  2. Add strong base to an excess of weak acid, so only part of the acid is converted to A⁻ (for a pH = pKa buffer, add exactly half the moles of OH⁻; 2017 FRQ Q3(c) idea).
  3. Add strong acid to an excess of weak base.

Particulate view. In a diagram of a buffer you should see many HA particles and many A⁻ particles, few H₃O⁺ ions (cations such as Na⁺ and water molecules are usually omitted). If a diagram shows more A⁻ than HA, the pH is above pKa; if more HA than A⁻, the pH is below pKa (2017 FRQ Q3(e) idea).

Real buffers. Blood is buffered mainly by H₂CO₃ / HCO₃⁻ (pKa ≈ 6.1 at body temperature, ratio [HCO₃⁻]/[H₂CO₃] ≈ 20 at pH 7.40) and by H₂PO₄⁻ / HPO₄²⁻ (pKa 7.20) inside cells. Antacid tablets that fizz in water (an AP lab activity) contain NaHCO₃ and citric acid, which form a buffer.

Dilution. Diluting a buffer with water changes [HA] and [A⁻] by the same factor, so their ratio and the pH stay essentially the same. (What dilution does change is the capacity; see 8.10.)

Common misconceptions.

  • "A buffer keeps the pH exactly constant." The pH changes slightly; it is resisted, not prevented.
  • "A buffer neutralises any amount of acid." Once one component is used up, the pH changes sharply (buffer capacity).
  • "A buffer must have pH 7." A buffer can have any pH; its pH is near the pKa of the acid used.

Key equations

Added acid: A−(aq)+H3O+(aq)→HA(aq)+H2O(l)\text{Added acid: } A^-(aq) + H_3O^+(aq) \rightarrow HA(aq) + H_2O(l)

Added base: HA(aq)+OH−(aq)→A−(aq)+H2O(l)\text{Added base: } HA(aq) + OH^-(aq) \rightarrow A^-(aq) + H_2O(l)

Worked examples

Worked example 8.8-A (modelled on 2017 AP FRQ Q3(c)). HNO₂ has pKa 3.40. A student wants a buffer of pH 3.40 using 0.100 M HNO₂ and 0.100 M NaOH. (i) Explain why adding NaOH to HNO₂ can make a buffer and write the net ionic equation. (ii) What volume of NaOH should be added to 100. mL of the HNO₂?

(i) HNO₂(aq) + OH⁻(aq) → NO₂⁻(aq) + H₂O(l). If less OH⁻ is added than HNO₂ present, some HNO₂ remains and some NO₂⁻ forms. A solution with significant amounts of both a weak acid and its conjugate base is a buffer.

(ii) pH = pKa requires [HNO₂] = [NO₂⁻], so half the HNO₂ must be neutralised. n(HNO₂) = 0.100 L × 0.100 M = 0.0100 mol; add 0.00500 mol OH⁻ = 50.0 mL of 0.100 M NaOH.

Worked example 8.8-B (particulate; modelled on 2017 AP FRQ Q3(e)). A diagram of a portion of an HNO₂ / NO₂⁻ buffer shows 6 HNO₂ molecules and 3 NO₂⁻ ions. Is the pH greater than, less than, or equal to 3.40?

Less than 3.40. [HNO₂] > [NO₂⁻], so log([NO₂⁻]/[HNO₂]) is negative; pH = 3.40 + log(3/6) = 3.10.

Worked example 8.8-C. Explain, with equations, how an NH₃ / NH₄Cl buffer responds to a few drops of HCl and to a few drops of NaOH.

Added HCl: NH₃(aq) + H₃O⁺(aq) → NH₄⁺(aq) + H₂O(l). Added NaOH: NH₄⁺(aq) + OH⁻(aq) → NH₃(aq) + H₂O(l). In each case the strong acid or base is replaced by a much weaker one, and the [NH₃]/[NH₄⁺] ratio changes only slightly, so the pH changes only slightly.

Unit 8 study guide: exam-style free-response set, worksheet and answers.

Topic 8.8

Worked example

Try it first, then reveal each step
A buffer contains CHX3COOH\ce{CH3COOH} and CHX3COOX−\ce{CH3COO-}. Write net ionic equations for adding (a) HCl\ce{HCl} and (b) NaOH\ce{NaOH}.
  1. (a) Added HX3OX+\ce{H3O+} is consumed by the conjugate base: CHX3COOX−(aq)+HX3OX+(aq)→CHX3COOH(aq)+HX2O(l)\ce{CH3COO-(aq) + H3O+(aq) -> CH3COOH(aq) + H2O(l)}.
  2. (b) Added OHX−\ce{OH-} is consumed by the weak acid: CHX3COOH(aq)+OHX−(aq)→CHX3COOX−(aq)+HX2O(l)\ce{CH3COOH(aq) + OH-(aq) -> CH3COO-(aq) + H2O(l)}.
  3. Answer: Acetate neutralizes added acid; acetic acid neutralizes added base.
Topic 8.8

Free-response practice

Write your answer first, then open the solution and mark yourself against it.

FRQ 8.8-1. A student prepares a buffer by mixing 0.50 mol of CH₃COOH and 0.50 mol of CH₃COONa in water to make 1.0 L.

(a) Describe a particulate diagram of a small portion of this buffer (water molecules and Na⁺ omitted).

(b) Write the net ionic equation for the reaction that occurs when a small amount of HNO₃ is added. Explain why the pH decreases only slightly.

(c) A second student adds 0.50 mol of NaOH to 1.0 L of 1.0 M CH₃COOH instead. Does this also make a buffer? Justify your answer.

Show the solution

(a) Equal numbers of CH₃COOH molecules and CH₃COO⁻ ions (for example 5 of each), with very few or no H₃O⁺ ions shown. (1 point)

(b) CH₃COO⁻(aq) + H₃O⁺(aq) → CH₃COOH(aq) + H₂O(l). The added H₃O⁺ is consumed by acetate and replaced by the weak acid CH₃COOH, which ionizes very little, so [H₃O⁺] rises only slightly. (2 points)

(c) Yes. CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O converts 0.50 mol of the 1.0 mol of acid to acetate, leaving 0.50 mol CH₃COOH and 0.50 mol CH₃COO⁻, the same composition as the first buffer. (1 point)

FRQ 8.8-2 (modelled on 2019 AP FRQ Q2(h)). A student has a solution of Na₂CO₃ and wants to make a CO₃²⁻ / HCO₃⁻ buffer with pH 6.0. For HCO₃⁻, pKa = 10.33.

(a) Is this pair suitable for a pH 6.0 buffer? Explain.

(b) Suggest a conjugate pair from the following that would be suitable, and justify: H₂CO₃ / HCO₃⁻ (pKa 6.35); H₂PO₄⁻ / HPO₄²⁻ (pKa 7.20); NH₄⁺ / NH₃ (pKa 9.26).

Show the solution

(a) No. A CO₃²⁻ / HCO₃⁻ buffer works best within about one unit of 10.33 (about pH 9.3 to 11.3). To get pH 6.0 the ratio [CO₃²⁻]/[HCO₃⁻] would have to be 10^(6.0 − 10.33) ≈ 5 × 10⁻⁵, so there would be essentially no CO₃²⁻ to react with added acid. (1 point)

(b) H₂CO₃ / HCO₃⁻, because its pKa (6.35) is within one unit of 6.0, so the target pH can be reached with a ratio [HCO₃⁻]/[H₂CO₃] = 10^(6.0 − 6.35) = 0.45, which keeps large amounts of both components. (1 point)

Watch out

Common mistake

Costs points

Students think a buffer keeps the pH perfectly constant. A buffer changes pH slightly, because the ratio of conjugate base to acid changes, and it fails once one component is used up.

Topic 8.8

Frequently asked questions

?What makes a solution a buffer?

Significant amounts of both a weak acid and its conjugate base (or a weak base and its conjugate acid) in the same solution.

?Why isn't HCl with NaCl a buffer?

ClX−\ce{Cl-} is the conjugate base of a strong acid and is too weak a base to react with added HX3OX+\ce{H3O+}.

Check yourself

Practice questions on 8.8

  1. Q1A buffer contains 0.20 M HA and 0.20 M AX−\ce{A-}. The pKa\mathrm{p}K_a of HA is 4.74. What is the pH?
  2. Q2A buffer has [AX−][\ce{A-}] ten times as large as [HA]. The pKa\mathrm{p}K_a of HA is 4.74. What is the pH?
  3. Q3Which pair of substances can be used to make a buffer?
  4. Q4Which pair of solutions, mixed in equal moles, makes a buffer?
  5. Q5Which mixture would act as a buffer?
  6. Q6What should be added to an NH₃ solution to make a buffer?
  7. Q725.0 mL of 2.0 M CH₃CH₂COOH has 20.0 g of NaCH₃CH₂COO dissolved in it. A few drops of HCl are added. What happens?
  8. Q8Each solution below contains a 1: 1 mole ratio of the two substances at 1 M each. Which one is a buffer with pH greater than 8?
  9. Q9A buffer has pH 3.60. After a small amount of KOH is added, its pH is 3.63. Which pair could make up this buffer?
  10. Q10A buffer is made from 0.20 M HOCl and 0.20 M NaOCl. It is diluted with an equal volume of water. What happens to its pH?
  11. Q11Which statement about a buffer made of 0.10 M HCOOH and 0.10 M HCOONa is correct?
  12. Q12100.0 mL of a buffer that is 0.30 M HF and 0.20 M NaF (pKa=3.17\mathrm{p}K_a = 3.17) receives 10.0 mL of 0.50 M NaOH. What is the new pH?
  13. Q13Which pair forms a buffer?
  14. Q14Which anion can serve as the base component of a buffer?
  15. Q15A small amount of HCl is added to an HCOOH/HCOONa buffer. What happens?
  16. Q16A buffer at pH 9.2 rises only to pH 9.23 when some NaOH is added. What is the buffer most likely made of?
  17. Q17What should be added to acetic acid to make a buffer?
Teaching this topic? Print a ready-to-use lesson: the simulation, five questions, an answer key and a QR code students scan to try it. Use this with your class

Terms used in this topic

Stuck on a unit? Let us fix it this week.

Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.

Book a session
Chat on WhatsApp