8.9 Henderson-Hasselbalch equation

AP Chemistry Unit 8: Acids and Bases · 16 practice questions

Updated · Aligned to the AP Chemistry Course and Exam Description

The short answer

The Henderson-Hasselbalch equation gives the pH of a buffer from the pKa\text{p}K_a of the weak acid and the ratio of conjugate base to acid: pH=pKa+log⁡[AX−][HA]\text{pH} = \text{p}K_a + \log\dfrac{[\ce{A-}]}{[\ce{HA}]}. Because both species are in the same volume, mole amounts can be used in the ratio. After adding strong acid or base, first update the moles of HA\ce{HA} and AX−\ce{A-} by stoichiometry, then apply the equation.

04
Topics 8.8 · 8.9

Buffers

A weak acid and its conjugate base, together.

Add OHX−\ce{OH-} and the HA\ce{HA} eats it. Add HX+\ce{H+} and the AX−\ce{A-} eats it. So the pH barely moves. Strong acid + strong base never makes a buffer.

pH=pKa+log⁡[AX−][HA]\mathrm{pH} = \mathrm{p}K_a + \log\dfrac{\ce{[A-]}}{\ce{[HA]}}

Henderson–Hasselbalch. Both are in the same solution, so you can use moles instead of molarity.

Test

100 mL acetate buffer vs water

Worked example

500 mL of 0.20 M HCl\ce{HCl} + 400 mL of 0.40 M CNX−\ce{CN-} (KaK_a of HCN=5×10−10\ce{HCN} = 5 \times 10^{-10}). pH?

  1. HX+\ce{H+}: 0.100 mol. CNX−\ce{CN-}: 0.160 mol. HX++CNX−→HCN\ce{H+ + CN- -> HCN} goes to completion.
  2. HX+\ce{H+} limiting: left with 0.060 mol CNX−\ce{CN-} and 0.100 mol HCN\ce{HCN}: a buffer.
  3. pKa=−log⁡(5×10−10)=9.30\mathrm{p}K_a = -\log(5 \times 10^{-10}) = 9.30.
  4. pH=9.30+log⁡0.0600.100=9.08\mathrm{pH} = 9.30 + \log\dfrac{0.060}{0.100} = 9.08
?X: 0.1 M NaOH\ce{NaOH} + 0.1 M HBr\ce{HBr} (equal volumes). Y: NaBr\ce{NaBr} solution + 0.1 M HBr\ce{HBr} (equal volumes). Z: equal moles of CHX3COOH\ce{CH3COOH} and CHX3COONa\ce{CH3COONa}. Rank by pH, lowest first.Think, then tap to check

Y < Z < X. Y: [HX+]=0.05 M\ce{[H+]} = 0.05\ \mathrm{M}, pH 1.3. Z: buffer at pH=pKa=4.74\mathrm{pH} = \mathrm{p}K_a = 4.74. X: neutralized, pH 7.

Topic 8.9 in depth

Study notes

Key concepts

The equation (SAP-10.C.1). The pH of a buffer depends on the pKa of its weak acid and on the ratio of the concentrations of the conjugate base and the acid:

pH = pKa + log([A⁻]/[HA])

It is simply the Ka expression, Ka = [H₃O⁺][A⁻]/[HA], with −log taken of both sides. It is on the AP equation sheet. (Deriving it will not be assessed.)

What the equation tells you.

  • When [A⁻] = [HA], log 1 = 0, so pH = pKa. This is the half-equivalence point of a titration and the "centre" of a buffer.
  • When [A⁻] > [HA], pH > pKa. When [A⁻] < [HA], pH < pKa.
  • A ratio of 10: 1 shifts the pH by +1 unit; 1: 10 by −1 unit. Good buffers have ratios between about 1: 10 and 10: 1, so the useful buffer range is pKa ± 1.
  • To make a buffer of a given pH, choose a weak acid whose pKa is as close as possible to the target pH, then adjust the ratio.
  • Because the ratio appears, you can use moles instead of concentrations when both species are in the same solution: [A⁻]/[HA] = n(A⁻)/n(HA). This saves time when volumes change.

Why small additions barely change the pH. Adding a small amount of acid or base changes the moles of HA and A⁻ by a small amount relative to the large amounts present, so the ratio, and its logarithm, change only slightly. Without the buffer, the same addition would change [H₃O⁺] by orders of magnitude. The CED says that computing the pH change when acid or base is added to a buffer will not be assessed, but you should be able to explain it, and one enrichment example is given below because it reinforces the stoichiometry-then-equilibrium method.

Base buffers. For a weak base / conjugate acid buffer (NH₃ / NH₄⁺), use the pKa of the conjugate acid: pH = pKa(NH₄⁺) + log([NH₃]/[NH₄⁺]), with pKa(NH₄⁺) = 14.00 − pKb(NH₃).

When the equation is not appropriate. Do not use Henderson–Hasselbalch for a weak acid alone (no A⁻; use an ICE table), at the equivalence point (no HA left), for strong acids, or when one component is extremely small compared with the other.

Common misconceptions.

  • Putting the ratio upside down. Remember "base over acid": [A⁻] (base) on top.
  • Using Ka instead of pKa in the equation.
  • Using pKb for a base buffer without converting to the pKa of the conjugate acid.

Key equations

pH=pKa+log⁡[A−][HA]pH = pK_a + \log\frac{[A^-]}{[HA]}

[A−][HA]=10 pH−pKa\frac{[A^-]}{[HA]} = 10^{\,pH - pK_a}

Base buffer: pH=(14.00−pKb)+log⁡[B][HB+]\text{Base buffer: } pH = (14.00 - pK_b) + \log\frac{[B]}{[HB^+]}

Worked examples

Worked example 8.9-A. Calculate the pH of a buffer containing 0.50 M CH₃COOH and 0.20 M CH₃COONa. Ka = 1.8 × 10⁻⁵.

pKa = −log(1.8 × 10⁻⁵) = 4.74. pH = 4.74 + log(0.20/0.50) = 4.74 − 0.40 = 4.35. (The original key gave 4.60 because it used Ka = 1.0 × 10⁻⁵.)

Worked example 8.9-B (designing a buffer). What mass of sodium acetate, CH₃COONa (molar mass 82.03 g/mol), must be dissolved in 500. mL of 0.200 M CH₃COOH to make a buffer of pH 5.00? Assume no volume change.

[A⁻]/[HA] = 10^(5.00 − 4.74) = 1.80. n(CH₃COOH) = 0.500 × 0.200 = 0.100 mol, so n(CH₃COO⁻) = 0.180 mol. Mass = 0.180 × 82.03 = 14.8 g.

Worked example 8.9-C (base buffer). Find the pH of a solution that is 0.30 M NH₃ and 0.20 M NH₄Cl. Kb(NH₃) = 1.8 × 10⁻⁵.

pKa(NH₄⁺) = 14.00 − 4.74 = 9.26. pH = 9.26 + log(0.30/0.20) = 9.26 + 0.18 = 9.43.

Worked example 8.9-D (buffer by partial neutralisation). How many mL of 0.100 M NaOH must be added to 100. mL of 0.100 M HNO₂ (pKa 3.40) to obtain pH 3.70?

Ratio = 10^(3.70 − 3.40) = 2.00. Let x = mol OH⁻ added: x / (0.0100 − x) = 2.00, so x = 6.66 × 10⁻³ mol, which is 66.6 mL of 0.100 M NaOH.

Worked example 8.9-E. 20.0 mL of 0.10 M NaOH is added to 200. mL of a buffer that is 0.25 M CH₃COOH and 0.10 M CH₃COONa. Find the new pH.

Before: n(HA) = 0.0500 mol, n(A⁻) = 0.0200 mol, n(OH⁻) = 0.00200 mol. Reaction HA + OH⁻ → A⁻ + H₂O: n(HA) = 0.0480 mol, n(A⁻) = 0.0220 mol. pH = 4.74 + log(0.0220/0.0480) = 4.41. The original pH was 4.74 + log(0.10/0.25) = 4.35, so the pH rose by only about 0.06.

Unit 8 study guide: exam-style free-response set, worksheet and answers.

Topic 8.9

Worked example

Try it first, then reveal each step
A 1.00 L buffer contains 0.15 mol CHX3COOH\ce{CH3COOH} and 0.25 mol CHX3COOX−\ce{CH3COO-} (pKa=4.74\text{p}K_a = 4.74). Find its pH before and after adding 0.010 mol NaOH\ce{NaOH}.
  1. Before: pH=4.74+log⁡0.250.15=4.96\text{pH} = 4.74 + \log\dfrac{0.25}{0.15} = 4.96.
  2. OHX−\ce{OH-} converts acid to base: 0.14 mol CHX3COOH\ce{CH3COOH}, 0.26 mol CHX3COOX−\ce{CH3COO-}.
  3. After: pH=4.74+log⁡0.260.14=5.01\text{pH} = 4.74 + \log\dfrac{0.26}{0.14} = 5.01.
  4. Answer: pH 4.96 before; pH 5.01 after
Topic 8.9

Free-response practice

Write your answer first, then open the solution and mark yourself against it.

FRQ 8.9-1. A chemist needs 1.00 L of a buffer with pH 9.00 and has NH₃ (Kb = 1.8 × 10⁻⁵) and solid NH₄Cl (molar mass 53.49 g/mol).

(a) Explain why the NH₃ / NH₄⁺ pair is a suitable choice for pH 9.00.

(b) Calculate the ratio [NH₃]/[NH₄⁺] required.

(c) If the buffer is made from 250. mL of 0.200 M NH₃ (later diluted to 1.00 L), calculate the mass of NH₄Cl needed.

(d) Will diluting the mixture from 250. mL to 1.00 L change the pH? Explain.

Show the solution

(a) pKa(NH₄⁺) = 14.00 − 4.74 = 9.26, which is within one unit of 9.00, so a ratio close to 1 can be used and both components are present in large amounts. (1 point)

(b) log([NH₃]/[NH₄⁺]) = 9.00 − 9.26 = −0.26, so the ratio = 0.56 (exactly 0.556 with pKa 9.255). (1 point)

(c) n(NH₃) = 0.250 × 0.200 = 0.0500 mol. n(NH₄⁺) = 0.0500 / 0.556 = 0.0900 mol. Mass = 0.0900 × 53.49 = 4.81 g. (2 points)

(d) No. Dilution reduces [NH₃] and [NH₄⁺] by the same factor, so the ratio and the pH stay the same (though the buffer capacity per litre drops). (1 point)

FRQ 8.9-2 (modelled on 2012 AP FRQ Q1(f)). A student is titrating a weak acid HA (Ka = 6.3 × 10⁻⁵). At one point the flask contains 2.5 × 10⁻³ mol HA and 7.5 × 10⁻³ mol A⁻ in 80.0 mL of solution.

(a) Calculate the pH of the solution.

(b) Calculate [H₃O⁺].

(c) Without calculation, state whether more or less than half of the original acid has been neutralised. Justify.

Show the solution

(a) pKa = 4.20. pH = 4.20 + log(7.5/2.5) = 4.20 + 0.48 = 4.68. (1 point)

(b) [H₃O⁺] = 10⁻⁴·⁶⁸ = 2.1 × 10⁻⁵ M (equivalently Ka × n(HA)/n(A⁻) = 6.3 × 10⁻⁵ × 1/3). (1 point)

(c) More than half. There is more A⁻ than HA, so more than half the HA has been converted to A⁻, and the solution is past the half-equivalence point (pH > pKa). (1 point)

Watch out

Common mistake

Costs points

Students put the acid on top of the log ratio. The ratio is base over acid, [AX−]/[HA][\ce{A-}]/[\ce{HA}]; more conjugate base must give a higher pH.

Topic 8.9

Frequently asked questions

?Can I use moles instead of concentrations in Henderson-Hasselbalch?

Yes. The acid and base are in the same volume, so the volume cancels in the ratio.

?When does the Henderson-Hasselbalch equation not work well?

When one component is very small relative to the other or the solution is very dilute, since the approximations behind it break down.

Check yourself

Practice questions on 8.9

  1. Q1A buffer contains 0.100 mol HCN and 0.060 mol CNX−\ce{CN-} (KaK_a of HCN = 5.0×10−105.0 \times 10^{-10}). What is its pH?
  2. Q2What is the pH of a solution that is 0.50 M CH₃COOH and 0.10 M CH₃COONa? Ka = 1.74 × 10⁻⁵.
  3. Q3A student has 1.0 M HA (Ka = 1.5 × 10⁻⁵) and 1.0 M NaA and must mix them to make a buffer with pH as close to 6.0 as possible. Which is true?
  4. Q4Which combination gives a buffer with pH closest to 10.5?
  5. Q5A buffer must have pH 5.3 and a base: acid ratio of 20: 1. Which acid should be used?
  6. Q6HCOOH has pKa 3.74. Which mixture has the lowest pOH?
  7. Q7A buffer contains 0.040 mol of NH₃ and 0.040 mol of NH₄Cl in 500. mL. Kb(NH₃) = 1.8 × 10⁻⁵. What is its pH?
  8. Q8An acetate buffer (pKa 4.74) has pH 4.44. What is the ratio [CH₃COO⁻]/[CH₃COOH]?
  9. Q9What is the pH of a solution that is 0.40 M HCOOH (pKa=3.74\mathrm{p}K_a = 3.74) and 0.20 M HCOONa?
  10. Q1050.0 mL of 0.20 M HNOX2\ce{HNO2} (pKa=3.35\mathrm{p}K_a = 3.35) is mixed with 30.0 mL of 0.20 M NaOH. What is the pH?
  11. Q11A buffer of HY (Ka=1.0×10−5K_a = 1.0 \times 10^{-5}) and NaY has pH 4.0. Which is true?
  12. Q12What is the pH of a solution that is 0.20 M NHX3\ce{NH3} and 0.40 M NHX4Cl\ce{NH4Cl} (pKa\mathrm{p}K_a of NHX4X+\ce{NH4+} = 9.26)?
  13. Q13A buffer of HA (pKa=4.8\mathrm{p}K_a = 4.8) and NaA, both 1.0 M stock solutions, must have pH 5.5. How should the volumes compare?
  14. Q14Which acid/conjugate base pair is best for a buffer at pH 7.4?
  15. Q15A buffer must have pH 4.3 with a base-to-acid ratio of 10:1. What KaK_a is required?
  16. Q16For HCOOH/HCOONa buffers (pKa=3.74\mathrm{p}K_a = 3.74), which composition has the highest pOH?
Teaching this topic? Print a ready-to-use lesson: the simulation, five questions, an answer key and a QR code students scan to try it. Use this with your class

Terms used in this topic

Stuck on a unit? Let us fix it this week.

Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.

Book a session
Chat on WhatsApp