AP Chemistry · Unit 8
Unit 8 practice questions: Acids and Bases
170 multiple-choice questions, sorted by topic. Each one has its own page with the answer and a worked explanation. Want a timed run instead? Practice them as a set.
8.1 Introduction to acids and bases
Learn the topic · Practice this topic- QA weak acid has at 25 °C. What is for its conjugate base?
- QAt 60 °C the value of Kw is 9.6 × 10⁻¹⁴. What is the pOH of pure water at 60 °C?
- QKw for water increases from 1.0 × 10⁻¹⁴ at 25 °C to 5.5 × 10⁻¹⁴ at 50 °C. What happens to the pH and the pOH of pure water when it is heated from 25 °C to 50 °C?
- QAt 25 °C, which of the following solutions is the most basic?
- QAt 25 °C, an aqueous solution has a pH of 9. What is [OH⁻]?
- QIn the reaction HCO₃⁻(aq) + H₂O(l) ⇌ H₂CO₃(aq) + OH⁻(aq), which species is acting as a Brønsted–Lowry acid?
- QSolution X has pH 2.0 and solution Y has pH 5.0, both at 25 °C. Which statement is correct?
- QIn liquid ammonia the reaction NH₄⁺ + NH₂⁻ → 2 NH₃ occurs. In this reaction NH₄⁺ acts as
- QAt 10 °C, . What is the pH of pure water at this temperature?
- QAt 60 °C, . How does pure water at 60 °C compare with pure water at 25 °C?
- QWhich solution is the most basic?
8.2 pH and pOH of strong acids and bases
Learn the topic · Practice this topic- QWhat is the pH of 0.010 M HCl?
- QWhat is the pH of 0.0010 M NaOH at 25 °C?
- QWhat is the pH of 2.00 × 10⁻⁴ M NaOH at 25 °C?
- Q6.00 × 10⁻⁴ mol of HCl is added to 1.0 L of 2.0 × 10⁻⁴ M HCl. Assuming no volume change, what is the new pH?
- QA 50.0 mL sample of NaOH solution has pH 12.50. Which procedure would give a NaOH solution with pH 11.50?
- QA student measures four 0.10 M solutions with a pH meter. Which reading is consistent with the identity of the solution at 25 °C?
- QWhich of the following 0.010 M solutions has the highest pH?
- Q10.0 mL of 0.10 M HCl is diluted with water to a final volume of 1.00 L. What is the pH of the diluted solution?
- Q50.0 mL of 0.020 M HNO₃ is mixed with 50.0 mL of distilled water. What is the pH of the result?
- QThree 0.0010 M solutions are tested: HCl, H₂SO₄ and CH₃COOH. Which ranking of pH, lowest to highest, is correct?
- QWhat is the pH of M ?
- QWhat is the pH of M HCl?
- QA student measures four solutions with pH probes, and only one probe reads correctly. Which?
- Q mol of is added to 0.50 L of M (no volume change). What is the new pH?
- QWhat is the pH of M HBr?
- QWhat is the pOH of M KOH?
- QWhat is the pH of M KOH?
- QWhat does a 0.1 M solution of the strong acid contain?
8.3 Weak acid and base equilibria
Learn the topic · Practice this topic- QWhat is the pH of 0.10 M acetic acid? ()
- QWhich salt gives a slightly acidic solution in water?
- QWhat is the approximate pH of 0.10 M HCN? ()
- QWhat is the pH of 0.50 M ethanoic (acetic) acid? Ka = 1.8 × 10⁻⁵.
- QWhat is [H₃O⁺] in 0.030 M HCN? Ka(HCN) = 3.0 × 10⁻¹⁰.
- QA weak acid has Ka = 1.0 × 10⁻⁸. What is its percent ionization in a 4.0 M solution?
- QA weak acid solution is diluted with water. By what factor must the acid concentration be reduced so that [H₃O⁺] falls to one-fourth of its original value? (Assume the approximation [H₃O⁺] = √(Ka·c) holds.)
- QPyridine, C₅H₅N, is a weak base with Kb = 1.7 × 10⁻⁹. Which is closest to the pH of 0.20 M pyridine?
- QA solution of a weak acid HA (Ka = 4.0 × 10⁻⁹) has pH 5.50. What is the approximate percent ionization of HA?
- QWhich 0.10 M aqueous solution has the highest pH?
- QWhen 0.10 M acetic acid is diluted to 0.010 M, which statement is correct?
- QA 0.050 M solution of a weak monoprotic acid has pH 3.00. What is the approximate Ka of the acid?
- QWhich 0.10 M aqueous solution is acidic?
- QThe Ka values are: HNO₂, 4.0 × 10⁻⁴; HCN, 6.2 × 10⁻¹⁰; HF, 6.8 × 10⁻⁴. Which list ranks the conjugate bases from strongest to weakest?
- QEqual concentrations (0.10 M) of HCl and CH₃COOH are tested for electrical conductivity. Which observation and explanation are correct?
- QWhat is the pH of 0.20 M ()?
- QFour 0.10 M weak acid solutions have values of 2.1, 4.8, 7.2 and 10.3. Which solution has the highest pH?
- QWhat is the percent ionization of a 1.0 M acid with ?
- QAn HF solution conducts electricity only weakly. Why?
- QGiven values: , , HCN , HOCl . Which is the weakest conjugate base?
- Q1 L of a weak acid solution is diluted to make one-third of its original value. To what volume must it be diluted?
- QWhich is the closest pH for 0.10 M ()?
- QA weak acid () has pH 3.00 in 100 mL. How much water must be added to raise the pH to 4.00?
- QA weak acid solution has pH 4.00, and . What is the percent ionization?
8.4 Acid-base reactions and buffers
Learn the topic · Practice this topic- Q500 mL of 1.0 M KOH is mixed with 300 mL of 2.0 M HBr. What is the pH of the mixture?
- QEqual volumes of equimolar NH₃(aq) and HCl(aq) are mixed. Which species are present in the largest amounts (apart from water) after the reaction?
- Q10.0 mL of 2.0 M HCl is mixed with 5.0 mL of 1.0 M NaOH. What is the pH of the mixture?
- Q1.00 L of 2.0 M HCl is mixed with 1.50 L of 1.0 M NaOH. What is the approximate pH?
- Q40.0 mL of 0.10 M HNO₂ (Ka = 4.0 × 10⁻⁴) is mixed with 20.0 mL of 0.15 M NaOH. What is the pH?
- QIn which mixture (in 1 L of water) is pH equal to the pKa of the weak acid HA?
- QFor the reaction CH₃COOH(aq) + CN⁻(aq) ⇌ HCN(aq) + CH₃COO⁻(aq), K = 3.7 × 10⁴ at 25 °C. Which conclusion is justified?
- QWhich pair, mixed in a 1: 1 mole ratio in water, gives a solution with pH greater than 7 at 25 °C?
- QEach solution contains a 1: 1 mole ratio of the two substances, each at 1 M. Which solution has the lowest pH?
- QEach solution contains a 1:1 mole ratio of the two substances, each at 1 M. Which solution is most nearly neutral?
- Q0.10 mol of a weak acid HA is mixed with 0.050 mol of NaOH in water. Which list gives the major solute species in the final solution?
- QEqual moles of and NaOH react. Which species are mainly present afterwards?
- Q500 mL of 1.0 M is mixed with 400 mL of 2.0 M KOH. What is the approximate pH?
- Q20.0 mL of 1.0 M HCl is mixed with 10.0 mL of 1.0 M NaOH. What is the pH?
8.5 Acid-base titrations
Learn the topic · Practice this topic- QA weak acid is titrated with NaOH. How does the pH at the equivalence point compare with 7?
- QAt the half-equivalence point in the titration of a weak acid HA with NaOH,
- QA weak acid is titrated with NaOH; the half-equivalence point is at pH 3.0. At pH 4.0, which is true?
- QA weak base B with Kb = 1.0 × 10⁻⁹ is titrated with HCl. What is the pH at the half-equivalence point?
- Q50.0 mL of 0.050 M benzoic acid (pKa 4.20) is titrated with 0.100 M NaOH. The pH at the equivalence point is about 8.4. Which indicator is the best choice?
- Q50.0 mL of 0.050 M benzoic acid (pKa 4.20) is titrated with 0.100 M NaOH. At which volume of NaOH is the solution the most effective buffer?
- QEqual volumes of two monoprotic acids, A and B, are titrated with the same 0.2 M KOH. Acid A needs twice the volume of KOH to reach equivalence, and its pH at the half-equivalence point is higher. Which is correct?
- QA weak diprotic acid H₂A is titrated with 0.1 M NaOH. The first equivalence point is at 7.0 mL and the second at 14.0 mL. At what volume does [HA⁻] = [A²⁻]?
- QA titration curve of an unknown acid with NaOH starts at pH 2.3, shows a buffer region, a first steep rise centred at 20.0 mL, a second buffer region, and a second steep rise centred at 40.0 mL. Which description fits the acid?
- QA student stops a titration of a monoprotic acid with 0.10 M NaOH before the true equivalence point is reached and uses that volume to calculate the acid concentration. The calculated concentration will be
- QAn antacid tablet containing Mg(OH)₂ (molar mass 58.32 g/mol) is titrated with 0.150 M HCl. The initial buret reading is 1.20 mL and the final reading is 17.20 mL. What mass of Mg(OH)₂ was in the tablet?
- QEqual volumes of 0.10 M HCl and 0.10 M CH₃COOH are each titrated with 0.10 M NaOH. Which is the same for the two titrations?
- QH₃PO₄ (0.10 M) is titrated with NaOH. Which species is present in the largest amount at the first equivalence point?
- QA student rinses a clean buret with distilled water but not with the NaOH titrant, then uses it to titrate an acid. How does this affect the calculated acid concentration?
- Q40.0 mL of 0.10 M HA () is titrated with 0.10 M NaOH. What is the pH at the equivalence point?
- QHF is titrated with KOH to the phenolphthalein endpoint. Which best describes the solution?
- QWhere is the equivalence point on a titration curve?
- QWhat volume of 0.40 M KOH titrates 25.0 mL of 0.80 M ?
- QA weighed solid acid is dissolved in roughly 30 mL of water and titrated to an indicator endpoint. What equipment is needed, besides ordinary glassware?
- QA weak base () is titrated with a strong acid. What is the pH at the half-equivalence point?
- QA titration curve shows two distinct steep rises as a strong base is added. What does this indicate?
- Q20.0 mL of reaches its first equivalence point after 15.0 mL of 0.200 M NaOH. What is ?
- QIn a weak acid titration, the equivalence point is at 30.0 mL. At what volume does pH = ?
- Q40.0 mL of a diprotic acid is completely neutralized by 24.0 mL of 0.250 M NaOH. What is the acid concentration?
- QMonoprotic acid X needs half as much base as acid Y (same volume of each), and its pH at the half-equivalence point is lower. Which is true?
- QA titration curve starts at pH 11 and has its equivalence point at pH 5.2. What does it represent?
- QA student overshoots the endpoint when titrating an acid of unknown concentration with standard NaOH. How does the calculated acid concentration compare with the true value?
- Q20.0 mL of a saturated MOH solution requires 8.00 mL of M HCl. What is the of MOH?
- QA weak diprotic acid reaches its first equivalence point at 12.0 mL. At what volume does ?
8.6 Molecular structure of acids and bases
Learn the topic · Practice this topic- QWhich is the strongest acid?
- QWhich of the following is the weakest acid?
- QWhich of the following is the weakest base?
- QWhich of the following is the weakest acid?
- QWhich statement about chloric acid, HClO₃, and iodic acid, HIO₃, is correct?
- QKb values: C₅H₅N = 1.7 × 10⁻⁹; C₆H₅NH₂ = 4.3 × 10⁻¹⁰; NH₃ = 1.8 × 10⁻⁵; CH₃NH₂ = 4.4 × 10⁻⁴. Which conjugate acid is the weakest acid?
- QPhosphorous acid, H₃PO₃, has one H atom bonded directly to P and two H atoms bonded to O atoms. How many moles of NaOH react completely with 1 mol of H₃PO₃?
- QWhich molecule is the strongest base?
- QFor H₃PO₄, Ka₁ = 7.1 × 10⁻³, Ka₂ = 6.3 × 10⁻⁸ and Ka₃ = 4.5 × 10⁻¹³. Which statement best explains why Ka₂ is much smaller than Ka₁?
- QHCl is a strong acid but HF is weak. Which statement explains this?
- QHF is a weak acid even though fluorine is very electronegative. Why?
- QWhich is the strongest oxoacid?
- QWhich is the strongest base?
- QWhy is acetic acid much more acidic than ethanol?
- Q values: ; aniline . Which is the strongest acid?
- QWhich is the strongest acid?
- QWhich functional group makes a compound most acidic?
- QWhich is the strongest acid?
- QWhich is the stronger acid, or , and why?
8.7 pH and pKa
Learn the topic · Practice this topic- QAn acid HA has . In a solution kept at pH 5.0, which form is present in the larger amount?
- QHX has Ka = 5.0 × 10⁻⁴. A buffer of HX and NaX has pH 4.5. Which must be true?
- QThymolphthalein (HTh) is colourless as HTh and blue as Th⁻; its colour changes between pH 9.3 and 10.5. Which statement is correct?
- QAn amine has pKb = 3.36 (pKa of its conjugate acid = 10.64). In a solution buffered at pH 7.40, which form predominates?
- QBromothymol blue (pKa ≈ 7.0) is yellow in acid and blue in base. A few drops are added to a solution of pH 4.0. What colour is seen and which form dominates?
- QA weak acid with pKa 6.0 is in a solution buffered at pH 7.0. What percent of the acid is present as A⁻?
- QFor HOCl (pKa = 7.52), in which solution is [OCl⁻] greater than [HOCl]?
- QAn indicator HIn is red in its acid form and yellow in its base form. In a solution of pH 6.2, the indicator is yellow; in a solution of pH 4.2 it is red. Which is the best estimate of pKa(HIn)?
- QIn which 1.0 L solution does pH equal ?
- QA weak acid reaches its equivalence point at 40.0 mL of base. At what volume is ?
- QAn indicator HIn has ; HIn is red and is yellow. What color is the indicator at pH 6.0?
- QA weak acid is titrated, with the equivalence point at 20.0 mL. At which volume is pH < ?
- QWhen pH = + 1, what is the ratio ?
8.8 Properties of buffers
Learn the topic · Practice this topic- QA buffer contains 0.20 M HA and 0.20 M . The of HA is 4.74. What is the pH?
- QA buffer has ten times as large as [HA]. The of HA is 4.74. What is the pH?
- QWhich pair of substances can be used to make a buffer?
- QWhich pair of solutions, mixed in equal moles, makes a buffer?
- QWhich mixture would act as a buffer?
- QWhat should be added to an NH₃ solution to make a buffer?
- Q25.0 mL of 2.0 M CH₃CH₂COOH has 20.0 g of NaCH₃CH₂COO dissolved in it. A few drops of HCl are added. What happens?
- QEach solution below contains a 1: 1 mole ratio of the two substances at 1 M each. Which one is a buffer with pH greater than 8?
- QA buffer has pH 3.60. After a small amount of KOH is added, its pH is 3.63. Which pair could make up this buffer?
- QA buffer is made from 0.20 M HOCl and 0.20 M NaOCl. It is diluted with an equal volume of water. What happens to its pH?
- QWhich statement about a buffer made of 0.10 M HCOOH and 0.10 M HCOONa is correct?
- Q100.0 mL of a buffer that is 0.30 M HF and 0.20 M NaF () receives 10.0 mL of 0.50 M NaOH. What is the new pH?
- QWhich pair forms a buffer?
- QWhich anion can serve as the base component of a buffer?
- QA small amount of HCl is added to an HCOOH/HCOONa buffer. What happens?
- QA buffer at pH 9.2 rises only to pH 9.23 when some NaOH is added. What is the buffer most likely made of?
- QWhat should be added to acetic acid to make a buffer?
8.9 Henderson-Hasselbalch equation
Learn the topic · Practice this topic- QA buffer contains 0.100 mol HCN and 0.060 mol ( of HCN = ). What is its pH?
- QWhat is the pH of a solution that is 0.50 M CH₃COOH and 0.10 M CH₃COONa? Ka = 1.74 × 10⁻⁵.
- QA student has 1.0 M HA (Ka = 1.5 × 10⁻⁵) and 1.0 M NaA and must mix them to make a buffer with pH as close to 6.0 as possible. Which is true?
- QWhich combination gives a buffer with pH closest to 10.5?
- QA buffer must have pH 5.3 and a base: acid ratio of 20: 1. Which acid should be used?
- QHCOOH has pKa 3.74. Which mixture has the lowest pOH?
- QA buffer contains 0.040 mol of NH₃ and 0.040 mol of NH₄Cl in 500. mL. Kb(NH₃) = 1.8 × 10⁻⁵. What is its pH?
- QAn acetate buffer (pKa 4.74) has pH 4.44. What is the ratio [CH₃COO⁻]/[CH₃COOH]?
- QWhat is the pH of a solution that is 0.40 M HCOOH () and 0.20 M HCOONa?
- Q50.0 mL of 0.20 M () is mixed with 30.0 mL of 0.20 M NaOH. What is the pH?
- QA buffer of HY () and NaY has pH 4.0. Which is true?
- QWhat is the pH of a solution that is 0.20 M and 0.40 M ( of = 9.26)?
- QA buffer of HA () and NaA, both 1.0 M stock solutions, must have pH 5.5. How should the volumes compare?
- QWhich acid/conjugate base pair is best for a buffer at pH 7.4?
- QA buffer must have pH 4.3 with a base-to-acid ratio of 10:1. What is required?
- QFor HCOOH/HCOONa buffers (), which composition has the highest pOH?
8.10 Buffer capacity
Learn the topic · Practice this topic- QKa of HF is greater than Ka of HIO. Which pair gives the buffer with the greatest capacity?
- QA buffer is 1.0 M HCOOH and 0.90 M NaHCOO. Which change increases its capacity to neutralise added acid?
- QA buffer has [HA] = 0.80 M and [A⁻] = 0.20 M. Which statement is correct?
- QFour buffers are made. Strong acid is added to each at the same rate. Which will first drop below pH 4?
- QFour propanoic acid / propanoate buffers, each with equal concentrations of acid and conjugate base, are titrated with 0.20 M KOH. The volumes of KOH needed to use up all the propanoic acid are 1 mL, 5 mL, 10 mL and 20 mL. Which buffer had the lowest buffer capacity?
- QFour acetic acid/acetate buffers each have a 1 : 1 ratio. Which has the lowest buffer capacity?
- QWhat increases a buffer's capacity without changing its pH much?
- QWhich pair forms the most effective buffer?
- QStrong acid is added at the same rate to four HOCl/NaOCl buffers containing an indicator. Which buffer reaches a strongly acidic pH first?