Unit 8 study guide: Acids and Bases
- Topic notes
- pH and Solubility (CED 7.13, SPQ-5.C)
- Exam-style free response
- Exam-style multiple choice
- Worksheet
Unit 8 is about proton (H⁺) transfer in water. You will learn to calculate pH and pOH, tell strong acids and bases from weak ones, write equilibrium expressions for Ka and Kb, predict what is in a beaker after an acid and a base are mixed, read titration curves (including those of polyprotic acids), explain acid strength from molecular structure, relate the pH of a solution to the pKa of a dissolved acid, and design and evaluate buffers. The College Board weights this unit at 11–15% of the AP Exam (about 14–15 class periods), which makes it one of the two heaviest units. It covers CED topics 8.1 Introduction to Acids and Bases, 8.2 pH and pOH of Strong Acids and Bases, 8.3 Weak Acid and Base Equilibria, 8.4 Acid–Base Reactions and Buffers, 8.5 Acid–Base Titrations, 8.6 Molecular Structure of Acids and Bases, 8.7 pH and pKa, 8.8 Properties of Buffers, 8.9 Henderson–Hasselbalch Equation and 8.10 Buffer Capacity. Because acid–base ideas also control how much of a salt dissolves, this unit's study guide ends with an in-depth look at pH and solubility (CED topic 7.13, which is examined using exactly the reasoning of this unit). Acid–base questions appear on almost every AP Chemistry free-response section, usually as a long (10-point) question, so practise the calculations until they are routine.
Topic notes
Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.
- 8.1 Introduction to acids and basesNotes · free response · 11 questions
- 8.2 pH and pOH of strong acids and basesNotes · free response · 18 questions
- 8.3 Weak acid and base equilibriaNotes · free response · 24 questions
- 8.4 Acid-base reactions and buffersNotes · free response · 14 questions
- 8.5 Acid-base titrationsNotes · free response · 29 questions
- 8.6 Molecular structure of acids and basesNotes · free response · 19 questions
- 8.7 pH and pKaNotes · free response · 13 questions
- 8.8 Properties of buffersNotes · free response · 17 questions
- 8.9 Henderson-Hasselbalch equationNotes · free response · 16 questions
- 8.10 Buffer capacityNotes · free response · 9 questions
pH and Solubility (CED 7.13, SPQ-5.C)
Key concepts
This topic belongs to Unit 7 in the CED, but it is answered entirely with Unit 8 reasoning, so it is treated in depth here.
The rule (SPQ-5.C.1). The solubility of a salt is pH-sensitive when one of its ions is a weak acid or a weak base. The effect is explained qualitatively with Le Châtelier's principle. (The CED states that computations of solubility as a function of pH will not be assessed.)
Salts with basic anions dissolve more in acid. Consider calcium fluoride:
CaF₂(s) ⇌ Ca²⁺(aq) + 2 F⁻(aq)
F⁻ is the conjugate base of the weak acid HF. If acid is added, H₃O⁺ reacts with F⁻:
F⁻(aq) + H₃O⁺(aq) → HF(aq) + H₂O(l)
This removes F⁻ from the solution, Q for the dissolution falls below Ksp, and the dissolution equilibrium shifts right: more CaF₂ dissolves. Ksp itself does not change (only temperature changes K); the solubility (how much dissolves) changes.
The same logic applies to every salt whose anion is a weak base:
| Salt | Basic anion | Reaction with added acid | Effect of lowering pH |
|---|---|---|---|
| Mg(OH)₂, Fe(OH)₃, Al(OH)₃ | OH⁻ | OH⁻ + H₃O⁺ → 2 H₂O | solubility increases greatly |
| CaCO₃, BaCO₃ | CO₃²⁻ | CO₃²⁻ + 2 H₃O⁺ → H₂CO₃ + 2 H₂O (H₂CO₃ → CO₂ + H₂O) | solubility increases; CO₂ fizzes |
| CaF₂, MgF₂ | F⁻ | F⁻ + H₃O⁺ → HF + H₂O | solubility increases |
| Ca₃(PO₄)₂ | PO₄³⁻ | PO₄³⁻ + H₃O⁺ → HPO₄²⁻ + H₂O | solubility increases (tooth enamel and acid) |
| Ag(CH₃COO), metal sulfides | CH₃COO⁻, S²⁻ | protonation of the anion | solubility increases |
| AgCl, AgBr, AgI, PbCl₂ | Cl⁻, Br⁻, I⁻ | none (conjugate bases of strong acids) | essentially no effect |
| BaSO₄ | SO₄²⁻ | very slight (HSO₄⁻ has Ka₂ ≈ 10⁻²) | small effect, usually treated as none |
Raising the pH. For a metal hydroxide, adding OH⁻ (a higher pH) is a common-ion effect: it shifts M(OH)ₙ(s) ⇌ Mⁿ⁺ + n OH⁻ to the left, so the hydroxide becomes less soluble. This is why metal ions can be precipitated as hydroxides by making the solution basic. (Some amphoteric hydroxides such as Al(OH)₃ and Zn(OH)₂ redissolve in very strongly basic solution by forming complex ions; this is beyond the AP Exam.)
Real-world connections. Limestone and marble (CaCO₃) dissolve in acid rain. Tooth enamel (hydroxyapatite, Ca₅(PO₄)₃OH) dissolves when bacteria produce acid; fluoride converts it to the less basic, less acid-soluble fluorapatite. Antacids such as Mg(OH)₂ and CaCO₃ "dissolve" in stomach acid because they react with it. In the gastrointestinal tract, the solubility of a drug that is a weak acid or weak base changes as the pH changes from about 1.5 in the stomach to about 6–7.5 in the intestine, which is the same Le Châtelier argument.
Enrichment (not assessed). Mg(OH)₂ has Ksp = 5.6 × 10⁻¹². In pure water its molar solubility is (Ksp/4)^(1/3) = 1.1 × 10⁻⁴ M (pH of the saturated solution = 10.35). In a solution buffered at pH 9.00 ([OH⁻] = 1.0 × 10⁻⁵ M), solubility = Ksp / [OH⁻]² = 5.6 × 10⁻² M, about 500 times higher. In a solution buffered at pH 10.00, solubility = 5.6 × 10⁻⁴ M.
How to write the AP-style justification. (1) Write the dissolution equilibrium. (2) Identify the ion that is a weak base (or acid). (3) Write the reaction of that ion with H₃O⁺ (or OH⁻). (4) State that removing the ion shifts the dissolution equilibrium to the right (Le Châtelier), so solubility increases. Or, for a common ion such as OH⁻ added to a hydroxide, state that the shift is to the left.
Key equations
Worked examples
Worked example 7.13-A. Predict and explain the effect of adding HNO₃ on the solubility of (a) BaCO₃, (b) BaSO₄ and (c) AgCl.
(a) Increases. BaCO₃(s) ⇌ Ba²⁺ + CO₃²⁻. CO₃²⁻ is a weak base and reacts with H₃O⁺ (forming HCO₃⁻ and then H₂CO₃, which releases CO₂). Removing CO₃²⁻ shifts the equilibrium right.
(b) Increases only very slightly. SO₄²⁻ is a very weak base, because HSO₄⁻ is a fairly strong acid; only a little SO₄²⁻ is protonated.
(c) No significant change. Cl⁻ is the conjugate base of the strong acid HCl and does not react with H₃O⁺, so the equilibrium is not disturbed.
Worked example 7.13-B. A saturated solution of Mg(OH)₂ has some solid at the bottom. Predict what happens to the amount of solid when (a) a few drops of NaOH are added; (b) a few drops of HCl are added.
(a) The solid increases: OH⁻ is a common ion and shifts Mg(OH)₂(s) ⇌ Mg²⁺ + 2 OH⁻ to the left.
(b) The solid decreases: H₃O⁺ + OH⁻ → 2 H₂O removes OH⁻, shifting the equilibrium to the right.
Free-response practice
FRQ 7.13-1. A student has three solids: AgCl, Ag₂CO₃ and AgCH₃COO. Each is shaken with water to form a saturated solution with excess solid.
(a) Write the dissolution equilibrium for Ag₂CO₃ and its Ksp expression.
(b) The student adds 1.0 M HNO₃ dropwise to each mixture. For each solid, predict whether the amount of undissolved solid decreases noticeably or stays about the same. Justify each prediction with a net ionic equation where a reaction occurs.
Show the solution
(a) Ag₂CO₃(s) ⇌ 2 Ag⁺(aq) + CO₃²⁻(aq); Ksp = [Ag⁺]²[CO₃²⁻]. (1 point)
(b) AgCl: stays about the same; Cl⁻ is the conjugate base of a strong acid and is not protonated. Ag₂CO₃: decreases; CO₃²⁻ + 2 H₃O⁺ → H₂CO₃ + 2 H₂O (then CO₂ is released), removing CO₃²⁻ so the equilibrium shifts right. AgCH₃COO: decreases; CH₃COO⁻ + H₃O⁺ → CH₃COOH + H₂O removes acetate and shifts the dissolution right. (3 points, one per salt)
Exam-style free-response set
Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.
These questions are modelled on released AP Chemistry free-response questions. The wording, substances and numbers have been changed; the structure and difficulty match the originals. Point allocations follow the style of the official scoring guidelines.
FRQ 1 (long, 10 points; modelled on 2012 AP FRQ Q1). A 1.50 g sample of a pure, solid monoprotic acid HA is dissolved in distilled water to make 50.0 mL of solution. The solution is titrated with 0.200 M NaOH, and the pH is measured with a pH meter. The equivalence point is reached when 50.0 mL of NaOH has been added.
| Volume of 0.200 M NaOH added (mL) | pH |
|---|---|
| 0.00 | ? |
| 12.5 | 3.32 |
| 25.0 | 3.80 |
| 37.5 | ? |
| 50.0 | 8.40 |
| 60.0 | 12.26 |
(a) Explain how the data in the table show that HA is a weak acid rather than a strong acid.
(b) Write the balanced net ionic equation for the reaction between HA and NaOH.
(c) Calculate the number of moles of HA titrated.
(d) Calculate the molar mass of HA.
(e) Determine the value of Ka for HA from the data. Explain your reasoning.
(f) Calculate the pH of the initial HA solution (0.00 mL NaOH added).
(g) Calculate [H₃O⁺] in the solution after 37.5 mL of NaOH has been added.
(h) Explain why the pH at the equivalence point is greater than 7.
(i) Which indicator would be most suitable: methyl red (pKa 5.0), bromothymol blue (pKa 7.0) or phenolphthalein (pKa 9.3)? Justify your choice.
Show the solution
(a) The pH at the equivalence point is 8.40, above 7, which shows the conjugate base A⁻ is basic, so HA is weak. Also, at 25.0 mL (half-equivalence) the pH is 3.80; a strong acid at that point would have [H₃O⁺] = 0.0050 mol / 0.0750 L = 0.067 M, pH 1.18. (1 point)
(b) HA(aq) + OH⁻(aq) → A⁻(aq) + H₂O(l). (1 point)
(c) n(HA) = n(OH⁻) at equivalence = 0.0500 L × 0.200 M = 0.0100 mol. (1 point)
(d) Molar mass = 1.50 g / 0.0100 mol = 150. g/mol. (1 point)
(e) At 25.0 mL, half of the HA has been neutralised, so [HA] = [A⁻] and pH = pKa = 3.80. Ka = 10⁻³·⁸⁰ = 1.6 × 10⁻⁴. (1 point for identifying half-equivalence, 1 point for Ka)
(f) [HA]₀ = 0.0100 mol / 0.0500 L = 0.200 M. [H₃O⁺] = √(1.6 × 10⁻⁴ × 0.200) = 5.6 × 10⁻³ M; pH = 2.25. (Check: 5.6 × 10⁻³ / 0.200 = 2.8%, so the approximation is valid.) (1 point)
(g) n(OH⁻) = 0.0375 × 0.200 = 7.50 × 10⁻³ mol. After reaction: n(HA) = 2.50 × 10⁻³ mol, n(A⁻) = 7.50 × 10⁻³ mol. [H₃O⁺] = Ka × n(HA)/n(A⁻) = 1.6 × 10⁻⁴ × (2.50/7.50) = 5.3 × 10⁻⁵ M (pH 4.28). (1 point)
(h) At equivalence the solution contains A⁻, the conjugate base of a weak acid, which reacts with water: A⁻ + H₂O ⇌ HA + OH⁻, producing OH⁻. (1 point)
(i) Phenolphthalein, because its pKa (9.3) is closest to the equivalence-point pH of 8.40, so its colour change (about 8.2–10.0) occurs at the equivalence point. (1 point)
FRQ 2 (long, 10 points; modelled on 1999 AP FRQ Q1 and 2011 AP FRQ Q1). Methylamine reacts with water: CH₃NH₂(aq) + H₂O(l) ⇌ CH₃NH₃⁺(aq) + OH⁻(aq). In 0.0200 M CH₃NH₂ at 25 °C, [OH⁻] = 2.76 × 10⁻³ M. Assume constant temperature and additive volumes.
(a) Write the equilibrium-constant expression for the reaction.
(b) Determine the pH of 0.0200 M CH₃NH₂.
(c) Determine the value of Kb for CH₃NH₂.
(d) Determine the percent ionization of CH₃NH₂ in this solution.
(e) A 25.0 mL sample of 0.0200 M CH₃NH₂ is titrated with 0.0125 M HCl.
(i) Determine the volume of HCl needed to reach the equivalence point.
(ii) Determine the pH after 20.0 mL of HCl has been added.
(iii) Determine the pH after 50.0 mL of HCl has been added.
(f) Is the pH at the equivalence point greater than, less than or equal to 7? Justify with a chemical equation.
Show the solution
(a) Kb = [CH₃NH₃⁺][OH⁻] / [CH₃NH₂]. (1 point)
(b) pOH = −log(2.76 × 10⁻³) = 2.56; pH = 14.00 − 2.56 = 11.44. (1 point)
(c) [CH₃NH₃⁺] = [OH⁻] = 2.76 × 10⁻³ M; [CH₃NH₂] = 0.0200 − 0.00276 = 0.0172 M. Kb = (2.76 × 10⁻³)² / 0.0172 = 4.4 × 10⁻⁴. (2 points: 1 for the equilibrium concentrations, 1 for Kb)
(d) (2.76 × 10⁻³ / 0.0200) × 100% = 13.8%. (1 point)
(e)(i) n(CH₃NH₂) = 0.0250 × 0.0200 = 5.00 × 10⁻⁴ mol. V(HCl) = 5.00 × 10⁻⁴ / 0.0125 = 0.0400 L = 40.0 mL. (1 point)
(e)(ii) 20.0 mL is half of the equivalence volume, so [CH₃NH₂] = [CH₃NH₃⁺] and pOH = pKb = −log(4.4 × 10⁻⁴) = 3.36. pH = 14.00 − 3.36 = 10.64. (1 point for recognising half-equivalence, 1 point for pH)
(e)(iii) n(H₃O⁺) added = 0.0500 × 0.0125 = 6.25 × 10⁻⁴ mol; excess = 6.25 × 10⁻⁴ − 5.00 × 10⁻⁴ = 1.25 × 10⁻⁴ mol in 75.0 mL. [H₃O⁺] = 1.67 × 10⁻³ M; pH = 2.78. (1 point)
(f) Less than 7. At equivalence only CH₃NH₃⁺ (and Cl⁻) remains, and CH₃NH₃⁺(aq) + H₂O(l) ⇌ CH₃NH₂(aq) + H₃O⁺(aq) produces H₃O⁺. (The pH is about 6.4.) (1 point)
FRQ 3 (short, 4 points; modelled on 2014 AP FRQ Q2(c) and (e)). Propanoic acid has Ka = 1.3 × 10⁻⁵ (pKa = 4.88).
(a) True or false: "Mixing 50.0 mL of 0.20 M propanoic acid with 50.0 mL of 0.20 M NaOH gives a solution with pH 7.00." Justify.
(b) True or false: "If an HCl solution and a propanoic acid solution have the same pH, the HCl must be less concentrated." Justify.
(c) A student titrated propanoic acid with NaOH using phenolphthalein. She will now titrate butanoic acid (pKa 4.82) and claims she needs a different indicator. Do you agree? Justify.
Show the solution
(a) False. The acid and base are equimolar, so the solution contains propanoate ion, a weak base: CH₃CH₂COO⁻ + H₂O ⇌ CH₃CH₂COOH + OH⁻. The pH is above 7 (about 8.9). (1 point)
(b) True. Same pH means same [H₃O⁺]. HCl ionizes completely, so [HCl] = [H₃O⁺]; propanoic acid ionizes only slightly, so its concentration must be much larger than [H₃O⁺]. (1 point)
(c) Disagree. The pKa values (4.88 and 4.82) are nearly the same, so the conjugate bases have nearly the same Kb, and equivalence-point pH values (for similar concentrations) will be nearly the same, around 8.9. Phenolphthalein (range 8.2–10.0) remains suitable. (2 points)
FRQ 4 (short, 4 points; modelled on 2017 AP FRQ Q3(c)–(e)). Hypochlorous acid, HOCl, has Ka = 3.0 × 10⁻⁸ (pKa = 7.52). A student has 0.200 M HOCl and 0.200 M KOH.
(a) What volume of 0.200 M KOH should be added to 50.0 mL of 0.200 M HOCl to make a buffer of pH 7.52? Justify, including the net ionic equation.
(b) A second student dissolves 0.050 mol of NaOCl in 100. mL of 0.500 M HOCl. Which buffer resists pH change better? Justify.
(c) A particulate diagram of an HOCl / OCl⁻ buffer shows 3 HOCl molecules and 6 OCl⁻ ions. Is its pH greater than, less than or equal to 7.52? Justify.
Show the solution
(a) 25.0 mL. HOCl(aq) + OH⁻(aq) → OCl⁻(aq) + H₂O(l). pH = pKa requires [HOCl] = [OCl⁻], so half of the 0.0100 mol HOCl must be neutralised: 0.00500 mol OH⁻ = 25.0 mL of 0.200 M KOH. (2 points)
(b) The second buffer. It contains 0.050 mol of each component, compared with 0.0050 mol of each in the first buffer. Both have pH 7.52, but the second has ten times more acid and base to neutralise additions. (1 point)
(c) Greater than 7.52. [OCl⁻] > [HOCl], so log([OCl⁻]/[HOCl]) = log 2 > 0 and pH = 7.52 + 0.30 = 7.82. (1 point)
FRQ 5 (short, 4 points; modelled on 2019 AP FRQ Q2(f)–(h)). In a solution of Na₂CO₃, carbonate ion reacts with water: CO₃²⁻(aq) + H₂O(l) ⇌ HCO₃⁻(aq) + OH⁻(aq), Kb = 2.1 × 10⁻⁴.
(a) Identify a laboratory method other than titration that could be used to find [OH⁻] in the solution, and explain how the initial [CO₃²⁻] could then be found (no calculation needed).
(b) The method in (a) gives pH 11.60. Calculate the initial concentration of Na₂CO₃.
(c) In the solution, is [HCO₃⁻] greater than, less than or equal to [CO₃²⁻] at equilibrium? Justify.
Show the solution
(a) Measure the pH with a calibrated pH meter (or probe). Then pOH = 14.00 − pH and [OH⁻] = 10^(−pOH). At equilibrium [HCO₃⁻] = [OH⁻], so substitute into Kb = [OH⁻]² / ([CO₃²⁻]₀ − [OH⁻]) and solve for [CO₃²⁻]₀. (1 point)
(b) pOH = 2.40; [OH⁻] = 3.98 × 10⁻³ M = [HCO₃⁻]. [CO₃²⁻]eq = (3.98 × 10⁻³)² / 2.1 × 10⁻⁴ = 0.0755 M. Initial [CO₃²⁻] = 0.0755 + 0.0040 = 0.079 M = [Na₂CO₃]. (2 points)
(c) Less than. Kb is small, so only about 5% of the CO₃²⁻ reacts; [HCO₃⁻] = 0.0040 M is much less than [CO₃²⁻] = 0.075 M. (1 point)
Exam-style multiple choice
17 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.
- Q1Each solution contains a 1: 1 mole ratio of the two substances, each at 1 M. Which solution has the lowest pH?
- Q2Each solution contains a 1:1 mole ratio of the two substances, each at 1 M. Which solution is most nearly neutral?
- Q3In liquid ammonia the reaction NH₄⁺ + NH₂⁻ → 2 NH₃ occurs. In this reaction NH₄⁺ acts as
- Q4A 0.050 M solution of a weak monoprotic acid has pH 3.00. What is the approximate Ka of the acid?
- Q5Which 0.10 M aqueous solution is acidic?
- Q6Equal volumes of 0.10 M HCl and 0.10 M CH₃COOH are each titrated with 0.10 M NaOH. Which is the same for the two titrations?
- Q70.10 mol of a weak acid HA is mixed with 0.050 mol of NaOH in water. Which list gives the major solute species in the final solution?
- Q8The Ka values are: HNO₂, 4.0 × 10⁻⁴; HCN, 6.2 × 10⁻¹⁰; HF, 6.8 × 10⁻⁴. Which list ranks the conjugate bases from strongest to weakest?
- Q9For H₃PO₄, Ka₁ = 7.1 × 10⁻³, Ka₂ = 6.3 × 10⁻⁸ and Ka₃ = 4.5 × 10⁻¹³. Which statement best explains why Ka₂ is much smaller than Ka₁?
- Q10An acetate buffer (pKa 4.74) has pH 4.44. What is the ratio [CH₃COO⁻]/[CH₃COOH]?
- Q11An indicator HIn is red in its acid form and yellow in its base form. In a solution of pH 6.2, the indicator is yellow; in a solution of pH 4.2 it is red. Which is the best estimate of pKa(HIn)?
- Q1250.0 mL of 0.020 M HNO₃ is mixed with 50.0 mL of distilled water. What is the pH of the result?
- Q13Equal concentrations (0.10 M) of HCl and CH₃COOH are tested for electrical conductivity. Which observation and explanation are correct?
- Q14H₃PO₄ (0.10 M) is titrated with NaOH. Which species is present in the largest amount at the first equivalence point?
- Q15A student rinses a clean buret with distilled water but not with the NaOH titrant, then uses it to titrate an acid. How does this affect the calculated acid concentration?
- Q16Three 0.0010 M solutions are tested: HCl, H₂SO₄ and CH₃COOH. Which ranking of pH, lowest to highest, is correct?
- Q17Which statement about a buffer made of 0.10 M HCOOH and 0.10 M HCOONa is correct?
Unit 8 worksheet
Work these problems on paper. Show all working, units and significant figures. Assume 25 °C unless stated. Useful data: Ka(CH₃COOH) = 1.8 × 10⁻⁵; Ka(HF) = 6.8 × 10⁻⁴; Ka(HOCl) = 3.0 × 10⁻⁸; Ka(HCN) = 6.2 × 10⁻¹⁰; pKa(HCOOH) = 3.74; Kb(NH₃) = 1.8 × 10⁻⁵.
-
A solution has [H₃O⁺] = 4.7 × 10⁻⁹ M. Calculate its pH and pOH and classify it as acidic, basic or neutral.
-
Calculate the pOH and pH of 0.0035 M Ca(OH)₂ (assume it is fully dissolved).
-
At 40 °C, Kw = 2.9 × 10⁻¹⁴. Calculate the pH of pure water at 40 °C. Is this water acidic, basic or neutral? Explain.
-
Calculate the pH of 0.12 M HOCl.
-
Calculate the pH and the percent ionization of 0.25 M NH₃.
-
Calculate the pH of 0.20 M KF.
-
A 0.075 M solution of a weak monoprotic acid has pH 2.85. Calculate Ka.
-
35.0 mL of 0.15 M HNO₃ is mixed with 25.0 mL of 0.18 M KOH. Calculate the pH of the mixture.
-
30.0 mL of 0.20 M HF is mixed with 10.0 mL of 0.30 M NaOH. Identify the major species and calculate the pH.
-
Explain why the percent ionization of a weak acid increases when its solution is diluted, even though the pH also increases.
-
Describe particulate diagrams (water omitted) for (a) 0.10 M HNO₃ and (b) 0.10 M HNO₂, each showing 10 acid-derived particles. Explain the difference.
-
A 20.00 mL sample of a weak monoprotic acid is titrated with 0.100 M NaOH. The data are:
| V(NaOH) (mL) | 0.00 | 6.20 | 12.40 | 18.60 | 24.80 | 30.00 |
|---|---|---|---|---|---|---|
| pH | 2.89 | 4.39 | 4.87 | 5.35 | 8.81 | 12.02 |
(a) Identify the equivalence-point volume and calculate the acid concentration. (b) Determine pKa and Ka. (c) Which species is present at higher concentration at 18.60 mL? Justify.
-
25.0 mL of oxalic acid, H₂C₂O₄ (pKa₁ = 1.25, pKa₂ = 4.27), is titrated with 0.100 M NaOH. The first equivalence point is at 15.0 mL. (a) At what volume is the second equivalence point? (b) What is the initial concentration of H₂C₂O₄? (c) State the pH at 22.5 mL and the major species there. (d) Which species predominates at 15.0 mL?
-
Rank HOI, HOBr, HOCl and HClO₂ from weakest to strongest acid. Justify your ranking with two structural factors.
-
Explain, in terms of the conjugate base, why fluoroacetic acid (CH₂FCOOH, pKa 2.59) is a stronger acid than acetic acid (pKa 4.74).
-
NH₃ is titrated with HCl. Which indicator, methyl red (range 4.8–6.0) or phenolphthalein (range 8.2–10.0), should be used? Justify.
-
Aspirin has pKa 3.5. Calculate the percent of aspirin present in the ionized form (A⁻) at pH 2.5 and at pH 4.5.
-
Calculate the pH of a buffer that is 0.35 M HCOOH and 0.50 M HCOONa.
-
What mass of NaF (molar mass 41.99 g/mol) must be added to 250. mL of 0.10 M HF to give a buffer of pH 3.50? Assume no volume change.
-
Buffer P is 0.40 M CH₃COOH / 0.10 M CH₃COONa. Buffer Q is 0.10 M CH₃COOH / 0.40 M CH₃COONa. (a) Calculate the pH of each. (b) Which buffer has the greater capacity for added NaOH? Justify.
-
Two acetate buffers both have pH 4.74. Buffer R contains 0.010 mol of each component; buffer S contains 0.10 mol of each, both in 1.0 L. Explain which is the better buffer and why their pH values are the same.
-
A student standardises NaOH by titrating a weighed sample of solid potassium hydrogen phthalate (KHP, a monoprotic acid). The KHP had absorbed water, so the student's recorded mass was larger than the true mass of KHP. Will the calculated NaOH concentration be too high, too low or unaffected? Justify.
-
Two titration curves are described. Curve 1: 25 mL of an acid with NaOH; starts at pH 1.0, stays below pH 2.5 until 24 mL, jumps to pH 11 at 25 mL. Curve 2: 25 mL of an acid with NaOH; starts at pH 2.9, rises to 4.7 by 12.5 mL, jumps from about 7 to 11 near 25 mL. Identify each acid as strong or weak and estimate the pKa where possible. Do the two acids have the same concentration? Explain.
-
Predict whether a solution of NH₄CN is acidic, basic or neutral. Justify using Ka and Kb values.
-
At 50 °C, Kw = 5.5 × 10⁻¹⁴. Equal moles of HCl and NaOH are mixed at 50 °C. What is the pH, and is the solution neutral?
-
Predict and explain the effect of adding HNO₃ on the solubility of (a) CaC₂O₄ (calcium oxalate) and (b) AgBr.
-
What volume of 0.100 M HCl must be added to 50.0 mL of 0.200 M NH₃ to make a buffer with pH 9.00?
-
A 100. mL portion of pure water and a 100. mL portion of a 0.10 M NH₃ / 0.10 M NH₄Cl buffer each receive 1.0 mL of 1.0 M NaOH. Describe what happens to the pH of each and write the net ionic equation for the reaction in the buffer.
Show the answer key
-
pH = −log(4.7 × 10⁻⁹) = 8.33; pOH = 5.67; basic.
-
[OH⁻] = 2 × 0.0035 = 0.0070 M; pOH = 2.15; pH = 11.85.
-
[H₃O⁺] = √(2.9 × 10⁻¹⁴) = 1.7 × 10⁻⁷ M; pH = 6.77. Neutral, because [H₃O⁺] = [OH⁻]; neutral pH is below 7 at 40 °C since Kw is larger.
-
[H₃O⁺] = √(3.0 × 10⁻⁸ × 0.12) = 6.0 × 10⁻⁵ M; pH = 4.22.
-
[OH⁻] = √(1.8 × 10⁻⁵ × 0.25) = 2.1 × 10⁻³ M; pOH = 2.67; pH = 11.33; percent ionization = 0.85%.
-
Kb(F⁻) = 1.0 × 10⁻¹⁴ / 6.8 × 10⁻⁴ = 1.5 × 10⁻¹¹; [OH⁻] = √(1.5 × 10⁻¹¹ × 0.20) = 1.7 × 10⁻⁶ M; pOH = 5.77; pH = 8.23.
-
[H₃O⁺] = 10⁻²·⁸⁵ = 1.41 × 10⁻³ M; Ka = (1.41 × 10⁻³)² / (0.075 − 0.0014) = 2.7 × 10⁻⁵.
-
n(H₃O⁺) = 5.25 × 10⁻³ mol; n(OH⁻) = 4.50 × 10⁻³ mol; excess H₃O⁺ = 7.5 × 10⁻⁴ mol in 60.0 mL = 0.0125 M; pH = 1.90.
-
n(HF) = 6.0 × 10⁻³ mol; n(OH⁻) = 3.0 × 10⁻³ mol. After reaction: 3.0 × 10⁻³ mol HF and 3.0 × 10⁻³ mol F⁻ (plus Na⁺): a buffer at half-neutralisation. pH = pKa = 3.17.
-
Percent ionization ≈ √(Ka/c) × 100%, which increases as c decreases. On dilution Q = [H₃O⁺][A⁻]/[HA] becomes smaller than Ka (two concentrations in the numerator, one in the denominator), so the equilibrium shifts towards ions. However, the total [H₃O⁺] still falls because there is less acid per litre, so the pH rises.
-
(a) HNO₃ is strong: 10 H₃O⁺ and 10 NO₃⁻ ions, no HNO₂/HNO₃ molecules. (b) HNO₂ is weak: about 9–10 intact HNO₂ molecules and at most 1 H₃O⁺ and 1 NO₂⁻. The strong acid ionizes completely; the weak acid only slightly.
-
(a) The steep jump is at 24.80 mL. n(OH⁻) = 0.02480 × 0.100 = 2.48 × 10⁻³ mol; [acid] = 2.48 × 10⁻³ / 0.02000 = 0.124 M. (b) Half-equivalence is 12.40 mL, where pH = 4.87 = pKa; Ka = 10⁻⁴·⁸⁷ = 1.3 × 10⁻⁵. (c) A⁻, because 18.60 mL is past half-equivalence (more than half the acid has been converted), and pH 5.35 > pKa 4.87.
-
(a) 30.0 mL (the second proton needs the same volume as the first). (b) n(H₂C₂O₄) = 0.0150 × 0.100 = 1.50 × 10⁻³ mol; concentration = 1.50 × 10⁻³ / 0.0250 = 0.0600 M. (c) 22.5 mL is halfway between the two equivalence points: [HC₂O₄⁻] = [C₂O₄²⁻] and pH = pKa₂ = 4.27. (d) HC₂O₄⁻.
-
HOI < HOBr < HOCl < HClO₂. For HOX acids with the same structure, the more electronegative halogen withdraws more electron density from the O–H bond and stabilises the conjugate base (I < Br < Cl). HClO₂ has an extra terminal O atom, which further withdraws electron density and allows the negative charge of ClO₂⁻ to be delocalised over two O atoms by resonance.
-
In fluoroacetate, CH₂FCOO⁻, the very electronegative F atom pulls electron density towards itself through the C–C bond (inductive effect), spreading out and stabilising the negative charge on the carboxylate group. A more stable conjugate base means a stronger acid (larger Ka, smaller pKa).
-
Methyl red. At the equivalence point only NH₄⁺ (a weak acid) is present, so the pH is below 7 (about 5.3 for 0.1 M solutions), which lies in the methyl red range. Phenolphthalein would change colour in the buffer region well before equivalence.
-
At pH 2.5: [A⁻]/[HA] = 10^(2.5 − 3.5) = 0.10, so A⁻ = 0.10/1.10 = 9.1%. At pH 4.5: ratio = 10, so A⁻ = 10/11 = 91%.
-
pH = 3.74 + log(0.50/0.35) = 3.74 + 0.15 = 3.89.
-
pKa(HF) = 3.17. Ratio [F⁻]/[HF] = 10^(3.50 − 3.17) = 2.15. n(HF) = 0.250 × 0.10 = 0.025 mol; n(F⁻) = 0.054 mol; mass = 0.054 × 41.99 = 2.3 g.
-
(a) P: pH = 4.74 + log(0.10/0.40) = 4.14. Q: pH = 4.74 + log(0.40/0.10) = 5.34. (b) Buffer P, because it has more CH₃COOH (0.40 M) to react with added OH⁻.
-
S is the better buffer (greater capacity): it contains ten times more of each component, so it can neutralise ten times more added acid or base before the ratio changes significantly. Their pH values are equal because the ratio [A⁻]/[HA] is 1 in both, so pH = pKa.
-
Too high. The recorded mass overstates the moles of KHP, so the calculated moles of NaOH that reacted are too large; dividing by the measured volume gives a NaOH concentration that is too high.
-
Curve 1: strong acid (low starting pH, no buffer region, jump from about 2.5 to 11, equivalence at pH 7); no pKa can be read. Curve 2: weak acid (higher starting pH, buffer region, equivalence above 7); pKa ≈ 4.7 from the pH at 12.5 mL. Both reach equivalence at 25 mL with the same NaOH, so both contain the same moles of acid: same concentration.
-
Basic. Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 1.8 × 10⁻⁵ = 5.6 × 10⁻¹⁰; Kb(CN⁻) = 1.0 × 10⁻¹⁴ / 6.2 × 10⁻¹⁰ = 1.6 × 10⁻⁵. Kb(CN⁻) ≫ Ka(NH₄⁺), so more OH⁻ than H₃O⁺ is produced.
-
Only Na⁺, Cl⁻ and water remain, so [H₃O⁺] = [OH⁻] = √(5.5 × 10⁻¹⁴) = 2.3 × 10⁻⁷ M. pH = 6.63, and the solution is neutral.
-
(a) Increases. CaC₂O₄(s) ⇌ Ca²⁺ + C₂O₄²⁻; oxalate is the conjugate base of a weak acid and is protonated (C₂O₄²⁻ + H₃O⁺ → HC₂O₄⁻ + H₂O), removing it and shifting the dissolution to the right. (b) Essentially no effect, because Br⁻ is the conjugate base of the strong acid HBr and is not protonated.
-
pKa(NH₄⁺) = 9.26; [NH₃]/[NH₄⁺] = 10^(9.00 − 9.26) = 0.556. n(NH₃)₀ = 0.0100 mol. With x mol HCl: (0.0100 − x)/x = 0.556, so x = 6.43 × 10⁻³ mol, which is 64.3 mL of 0.100 M HCl.
-
Water: the 1.0 × 10⁻³ mol OH⁻ in 101 mL gives [OH⁻] = 9.9 × 10⁻³ M, so the pH jumps from 7.00 to about 12.00. Buffer: NH₄⁺(aq) + OH⁻(aq) → NH₃(aq) + H₂O(l) consumes the OH⁻; n(NH₃) rises from 0.010 to 0.011 mol and n(NH₄⁺) falls to 0.009 mol, so the pH changes only from 9.26 to about 9.34.
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session