8.10 Buffer capacity
AP Chemistry Unit 8: Acids and Bases · 9 practice questions
Updated · Aligned to the AP Chemistry Course and Exam Description
Buffer capacity is the amount of strong acid or strong base a buffer can neutralize before its pH changes significantly. It increases with the concentrations of the weak acid and conjugate base, and a buffer resists both acid and base best when , that is, when . A buffer with more than has more capacity for added acid than for added base.
Structure, pH and pKa
→ dominates. Indicators change color near their .
: extra O pulls electron density off O–H.
Tiny F holds H tightly, so is not released easily.
Stronger acid, weaker conjugate base.
Study notes
Key concepts
What buffer capacity means. Buffer capacity is the amount of strong acid or strong base a buffer can neutralise before its pH changes significantly (by convention, by about one unit). Capacity depends on the amounts (moles) of the buffer components, not on their ratio alone.
Concentration effect (SAP-10.D.1). Increasing the concentrations of both components while keeping their ratio constant keeps the pH the same (the Henderson–Hasselbalch ratio is unchanged) but increases the capacity. A buffer that is 1.0 M CH₃COOH / 1.0 M CH₃COO⁻ and one that is 0.010 M / 0.010 M both have pH 4.74, but the first can neutralise 100 times more acid or base per litre.
| 1.00 L of acetate buffer | pH | mol of HCl that lowers the pH by 1 unit |
|---|---|---|
| 0.10 M CH₃COOH / 0.10 M CH₃COO⁻ | 4.74 | 0.082 mol |
| 0.010 M CH₃COOH / 0.010 M CH₃COO⁻ | 4.74 | 0.0082 mol |
(Calculation for the first row: the pH drops one unit when (0.10 − x)/(0.10 + x) = 0.10, which gives x = 0.082 mol.)
Ratio effect (SAP-10.D.2). The component present in the larger amount determines which addition the buffer handles better.
- More conjugate acid than base (pH < pKa): greater capacity for added base. The large amount of HA can neutralise much OH⁻; the small amount of A⁻ is used up quickly by added acid.
- More conjugate base than acid (pH > pKa): greater capacity for added acid.
- Equal amounts (pH = pKa): equal capacity in both directions; this is the most balanced buffer. This is why the half-equivalence point of a titration is the point of "optimum buffer action".
Choosing the best buffer. For the greatest overall effectiveness: choose an acid with pKa close to the target pH (so the ratio is near 1), and use high concentrations of both components. Adding more of one solid component increases the capacity against the reagent that component neutralises (and shifts the pH slightly).
What happens when capacity is exceeded. Once one component is used up, the solution is no longer a buffer. Any further strong acid or base is in excess and the pH changes sharply. On a titration curve this is the steep region near the equivalence point.
Experimental considerations (skill 6.G). In the AP buffer lab (Investigation 16), common sources of error include: an uncalibrated pH meter; a mass of solid salt that is weighed incorrectly or is wet (so fewer moles than assumed); using a weak acid whose pKa is far from the target pH; and adding too much strong acid or base when testing so that the capacity is exceeded. You should be able to predict the direction of each error. For example, if some of the solid NaA was lost when transferring it, [A⁻]/[HA] is smaller than intended, so the measured pH will be lower than the target and the buffer will have less capacity for added acid.
Common misconceptions.
- "A buffer's capacity depends on its pH." Two buffers with the same pH can have very different capacities.
- "Diluting a buffer has no effect at all." The pH stays the same, but the capacity decreases.
- "A buffer with more A⁻ resists base better." It resists acid better.
Key equations
Worked examples
Worked example 8.10-A (modelled on 2017 AP FRQ Q3(d)). Buffer 1 is made by adding 50.0 mL of 0.100 M NaOH to 100. mL of 0.100 M HNO₂. Buffer 2 is made by dissolving 0.100 mol NaNO₂ in 100. mL of 1.00 M HNO₂. Which buffer is more resistant to pH change when strong acid or base is added?
Buffer 1 contains 5.00 × 10⁻³ mol HNO₂ and 5.00 × 10⁻³ mol NO₂⁻. Buffer 2 contains 0.100 mol HNO₂ and 0.100 mol NO₂⁻. Both have a 1: 1 ratio, so both have pH = 3.40. Buffer 2 has 20 times more of each component, so it can neutralise 20 times more added acid or base before the ratio changes significantly. Buffer 2 is more resistant.
Worked example 8.10-B. A buffer contains 0.15 mol HCOO⁻ and 0.05 mol HCOOH in 1.0 L (pKa 3.74). (a) Find its pH. (b) Does it have greater capacity for added acid or base?
(a) pH = 3.74 + log(0.15/0.05) = 3.74 + 0.48 = 4.22. (b) Greater capacity for added acid: 0.15 mol of HCOO⁻ is available to react with H₃O⁺, but only 0.05 mol of HCOOH can react with OH⁻.
Unit 8 study guide: exam-style free-response set, worksheet and answers.
Worked example
- Both start at pH 4.74.
- A: 0.05 mol , 0.15 mol ; .
- B: 0.95 mol , 1.05 mol ; .
- Answer: A rises to pH 5.22; B only to pH 4.78, so B has the greater capacity.
Free-response practice
Write your answer first, then open the solution and mark yourself against it.
FRQ 8.10-1. Two acetate buffers are prepared: Buffer X is 0.50 M CH₃COOH / 0.50 M CH₃COONa; Buffer Y is 0.050 M CH₃COOH / 0.050 M CH₃COONa. Each has a volume of 100. mL. pKa = 4.74.
(a) Compare the pH values of X and Y. Justify.
(b) 5.0 mL of 1.0 M HCl is added to each buffer. In which buffer does the pH change more? Justify with reference to the amounts of the buffer components.
(c) Calculate the pH of Buffer Y after the HCl is added, and comment on whether Y still behaves as a buffer.
Show the solution
(a) Both are 4.74. In each, [CH₃COO⁻]/[CH₃COOH] = 1, so pH = pKa; concentration does not appear in the Henderson–Hasselbalch equation, only the ratio. (1 point)
(b) Buffer Y. 5.0 mL of 1.0 M HCl is 5.0 × 10⁻³ mol H₃O⁺. Buffer X has 0.050 mol of acetate, so the addition uses only 10% of it. Buffer Y has only 5.0 × 10⁻³ mol of acetate, so all of it is used up. (2 points)
(c) In Y, CH₃COO⁻ + H₃O⁺ → CH₃COOH + H₂O consumes all 5.0 × 10⁻³ mol acetate, leaving 1.0 × 10⁻² mol CH₃COOH in 105 mL (0.095 M) and no acetate. Now it is just a weak acid: [H₃O⁺] = √(1.8 × 10⁻⁵ × 0.095) = 1.3 × 10⁻³ M, pH = 2.88. The pH fell by almost 2 units: the buffer capacity was exceeded and Y no longer behaves as a buffer. (2 points)
FRQ 8.10-2 (experimental error, skill 6.G). A student wants a buffer of pH 4.74 by dissolving 0.0100 mol of solid CH₃COONa in 100. mL of 0.100 M CH₃COOH. The solid had absorbed water from the air, so its actual mass of CH₃COONa was less than the student assumed.
(a) Will the measured pH be higher, lower, or equal to 4.74? Justify.
(b) Will the buffer's capacity to neutralise added HCl be greater or smaller than intended? Justify.
Show the solution
(a) Lower. Fewer moles of CH₃COO⁻ were added, so [CH₃COO⁻]/[CH₃COOH] < 1 and log of the ratio is negative. (1 point)
(b) Smaller. Capacity for added acid depends on the moles of CH₃COO⁻, which are less than planned. (1 point)
Common mistake
Students think two buffers with the same pH resist pH change equally. Pairs with the same ratio have the same pH, but the more concentrated buffer can neutralize much more added acid or base.
Frequently asked questions
?How do you increase buffer capacity?
Increase the concentrations of both the weak acid and its conjugate base while keeping their ratio the same.
?At what pH is buffer capacity greatest?
When , because equal amounts of acid and base are available to neutralize either added base or added acid.
Practice questions on 8.10
- Q1Ka of HF is greater than Ka of HIO. Which pair gives the buffer with the greatest capacity?
- Q2A buffer is 1.0 M HCOOH and 0.90 M NaHCOO. Which change increases its capacity to neutralise added acid?
- Q3A buffer has [HA] = 0.80 M and [A⁻] = 0.20 M. Which statement is correct?
- Q4Four buffers are made. Strong acid is added to each at the same rate. Which will first drop below pH 4?
- Q5Four propanoic acid / propanoate buffers, each with equal concentrations of acid and conjugate base, are titrated with 0.20 M KOH. The volumes of KOH needed to use up all the propanoic acid are 1 mL, 5 mL, 10 mL and 20 mL. Which buffer had the lowest buffer capacity?
- Q6Four acetic acid/acetate buffers each have a 1 : 1 ratio. Which has the lowest buffer capacity?
- Q7What increases a buffer's capacity without changing its pH much?
- Q8Which pair forms the most effective buffer?
- Q9Strong acid is added at the same rate to four HOCl/NaOCl buffers containing an indicator. Which buffer reaches a strongly acidic pH first?
Terms used in this topic
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session