AP Chemistry · Unit 1

Unit 1 practice questions: Atomic Structure and Properties

183 multiple-choice questions, sorted by topic. Each one has its own page with the answer and a worked explanation. Want a timed run instead? Practice them as a set.

1.1 Moles and molar mass

Learn the topic · Practice this topic
  1. QHow many moles of COX2\ce{CO2} are in 22.0 g of COX2\ce{CO2}? (Molar mass = 44.0 g/mol)
  2. QHow many oxygen atoms are in 0.250 mol of Ca(NOX3)X2\ce{Ca(NO3)2}?
  3. QWhat is the mass of 0.150 mol of NaX2COX3\ce{Na2CO3}? (Molar mass = 106.0 g/mol)
  4. QWhich sample contains the greatest number of atoms?
  5. QWhat are the mass and the number of formula units in 4.00 mol of NaOH?
  6. QWhich of the following pairs contains the same number of oxygen atoms?
  7. QThe average mass of one molecule of a substance is 44.01 amu. Which statement must be true?
  8. QWhich sample contains the greatest number of atoms in total?
  9. QWhat is the mass of 2.50 mol of KOH\ce{KOH}, and how many formula units does it contain?
  10. QWhich pair contains the same number of particles?
  11. QA student needs exactly 3.00 mol of calcium metal. What is the most practical way to measure it?
  12. QCyclohexane has the empirical formula CHX2\ce{CH2} and a molar mass of 84 g/mol. What mass of hydrogen is in 168 g of cyclohexane?
  13. QWhat mass of sulfur is in 160 g of SOX3\ce{SO3}?
  14. QWhich statement about 0.250 mol of KX2SOX4\ce{K2SO4} is correct?

1.2 Mass spectroscopy of elements

Learn the topic · Practice this topic
  1. QThe mass spectrum of an element shows two isotopes: 10.0 amu (20.0%) and 11.0 amu (80.0%). What is its average atomic mass?
  2. QCopper has two isotopes, X63X2263Cu\ce{^{63}Cu} and X65X2265Cu\ce{^{65}Cu}, and an average atomic mass of 63.55 amu. Which statement is true?
  3. QNeon's average atomic mass is 20.18 amu. Its isotopes are neon-20 (19.99 amu) and neon-22 (21.99 amu). What is the percent abundance of neon-20?
  4. QThe mass spectrum of an element has two peaks: 185 amu with relative abundance 40 and 187 amu with relative abundance 60. Its average atomic mass is closest to
  5. QThe mass spectrum of a pure element shows two peaks: m/z = 10 with relative abundance 19.9% and m/z = 11 with relative abundance 80.1%. What is the approximate average atomic mass of the element?
  6. QGallium has an atomic mass of 69.72 and only two naturally occurring isotopes, ⁶⁹Ga and ⁷¹Ga. The natural abundance of ⁷¹Ga is approximately
  7. QA mass spectrum of a pure element shows five peaks, at m/z = 90 (51.5%), 91 (11.2%), 92 (17.2%), 94 (17.4%) and 96 (2.8%). The element is most likely
  8. QWhich statement about the two isotopes ³⁵Cl and ³⁷Cl is correct?
  9. QIn the mass spectrum of a pure element, what does the height of each peak represent?
  10. QThe mass spectrum of an element shows two peaks: m/z=69m/z = 69 (60.1%) and m/z=71m/z = 71 (39.9%). What is its average atomic mass?
  11. QA diatomic element produces mass-spectrum peaks at m/zm/z = 79, 81, 158, 160 and 162. What best explains the peaks at 158, 160 and 162?
  12. QA diatomic element gives mass-spectrum peaks at m/zm/z = 79, 81, 158, 160 and 162. Which element is it?
  13. QA pure sample of nitrogen gas shows a major peak at m/z=28m/z = 28. This peak is evidence of:
  14. QChlorine has isotopes of mass 35 and 37 and an average atomic mass of 35.45. What are the approximate abundances?

1.3 Elemental composition of pure substances

Learn the topic · Practice this topic
  1. QA compound is 40.0% C, 6.7% H and 53.3% O by mass. What is its empirical formula?
  2. QA compound has the empirical formula CHX2\ce{CH2} and a molar mass of 56 g/mol. What is its molecular formula?
  3. QWhat is the mass percent of nitrogen in NHX4NOX3\ce{NH4NO3}? (Molar mass = 80.04 g/mol)
  4. QA sample of a compound contains 1.20 g of carbon and 0.30 g of hydrogen. What is its empirical formula?
  5. QA 42 g sample of a compound of carbon and hydrogen contains 36 g of carbon and 6 g of hydrogen. Which question can be answered from these data alone?
  6. QA student weighs a sample of metal M, heats it in air until it has completely become the oxide MO, and weighs the oxide. Which can be determined from the results?
  7. QWhen vanadium metal is heated in chlorine gas, the product contains 32.4% V and 67.6% Cl by mass. What is the empirical formula of the product?
  8. QWhich of the following has the greatest percent oxygen by mass?
  9. QThe empirical formula of benzene is CH and its molar mass is 78.1 g/mol. What mass of hydrogen is in 156 g of benzene?
  10. QTwo samples of a pure compound are analysed. Sample 1 (5.00 g) contains 4.00 g of copper. Sample 2 has a mass of 18.0 g. What mass of oxygen does sample 2 contain if the compound contains only copper and oxygen?
  11. QWhich pair of substances must have the same percent composition by mass?
  12. QA compound contains 2.00 mol K, 1.00 mol C and 3.00 mol O. What is its empirical formula?
  13. QWhat is the empirical formula of CX6HX12\ce{C6H12}?
  14. QWhich nitrogen oxide has the greatest percent oxygen by mass?
  15. QWhich pair contains the same number of oxygen atoms?
  16. QTwo volumes of gas X combine with one volume of gas Z to give two volumes of gas W (same TT and PP). Which conclusion is justified?
  17. QA 20.0 g sample labelled MgO\ce{MgO} contains 10.8 g of Mg. What is the percent purity of the MgO\ce{MgO}?
  18. QWhich pair of compounds has identical percent composition by mass?
  19. QAn 8.0 g sample of pure MgO\ce{MgO} contains 4.8 g of Mg. What mass of oxygen is in 30.0 g of MgO\ce{MgO}?
  20. QA carbon–oxygen compound decomposes into 30 g of carbon and 40 g of oxygen. What is its empirical formula?
  21. QAn oxide of sulfur is 40.0% sulfur by mass. The options are SOX2\ce{SO2} and SOX3\ce{SO3}. Which is it?
  22. QA compound is 52.2% C, 13.0% H and 34.8% O by mass. What is its empirical formula?

1.4 Composition of mixtures

Learn the topic · Practice this topic
  1. QA 2.00 g sample of impure CaCOX3\ce{CaCO3} (molar mass 100.1 g/mol) releases 0.0150 mol of COX2\ce{CO2} when heated: CaCOX3⟶CaO+COX2\ce{CaCO3} \longrightarrow \ce{CaO} + \ce{CO2}. The impurities do not react. What is the mass percent of CaCOX3\ce{CaCO3} in the sample?
  2. QPure NaCl is 60.7% Cl by mass and pure KCl is 47.6% Cl by mass. A mixture of only these two salts is 52.0% Cl by mass. Which statement is true?
  3. QA jar labeled NaCl contains a white powder. Which measurement on a sample of the powder is most helpful in deciding whether it is pure NaCl?
  4. QA student dissolves 10.0 g of a powder labeled BaClX2\ce{BaCl2} in water and adds excess NaX2SOX4\ce{Na2SO4}. The BaSOX4\ce{BaSO4} precipitate is filtered, rinsed and dried to constant mass. Which question can the experiment best answer?
  5. QA mixture contains only the chlorides XCl and ZCl. The percent by mass of X and of Z in the mixture are known. What else is needed to calculate the mole percent of XCl and ZCl?
  6. QWhich of these is a homogeneous mixture?
  7. QWhich method is best for separating ethanol (boiling point 78 °C) from water?
  8. QA sample of pure NaCl is accidentally mixed with some KCl. Compared with pure NaCl, the mass percent of chlorine in the mixture is
  9. QHousehold bleach is 5.25% NaOCl by mass and has a density of 1.11 g/mL. What mass of NaOCl is in 800. mL of bleach?
  10. QA sealed flask contains pure NO₂(g). Some Cl₂(g) leaks into the flask. Which of the following changes?
  11. QA 20.0 g sample of electrum (an alloy of gold and silver) is treated with nitric acid, which dissolves only the silver. The silver is then precipitated completely as 15.68 g of AgCl (molar mass 143.32 g/mol). What is the mass percent of silver in the alloy?
  12. QA student measures the chlorine content of a white powder labelled NaCl and gets 58.0% Cl. Pure NaCl is 60.7% Cl. Which conclusion is best supported?
  13. QA protein is 0.320% iron by mass, and each molecule contains one Fe atom. What is its approximate molar mass?
  14. QIn compound XY, X is 60.0% by mass. What is the percent of Y by mass in XYX3\ce{XY3}?
  15. QA 250 g sample of CuSOX4⋅x HX2O\ce{CuSO4} \cdot x\,\ce{H2O} contains 90.0 g of water. What is xx?
  16. QAn impure ore containing CuX2S\ce{Cu2S} is roasted: CuX2S+OX2⟶2 Cu+SOX2\ce{Cu2S} + \ce{O2} \longrightarrow \ce{2Cu} + \ce{SO2}. If 80.0 g of ore produces 12.8 g of SOX2\ce{SO2}, what is the percent copper in the ore?
  17. QA disinfectant is 3.00% HX2OX2\ce{H2O2} by mass with a density of 1.01 g/mL. What mass of HX2OX2\ce{H2O2} is in 500 mL?
  18. QA 25.0 g piece of brass (Cu and Zn) reacts with excess HCl. Only the zinc reacts (Zn+2 HCl⟶ZnClX2+HX2\ce{Zn} + \ce{2HCl} \longrightarrow \ce{ZnCl2} + \ce{H2}), producing 0.250 g of HX2\ce{H2}. What is the percent zinc by mass?
  19. QA sealed flask of pure COX2\ce{CO2} is accidentally contaminated with argon. Which statement is true?
  20. Q55.85 g of iron is heated in oxygen and forms 76.0 g of oxide product. What does the product contain? (One mole of Fe would form 71.85 g of FeO or 79.85 g of FeX2OX3\ce{Fe2O3}.)
  21. QA copper object has a volume of 5.00 cm3\mathrm{cm^3} (density 8.96 g/cm3\mathrm{g/cm^3}). If 25.0% of the copper by mass is converted to CuO, what is the new mass of the object?
  22. Q150.0 g of a mixture of CuSOX4 ⋅ 5 HX2O\ce{CuSO4.5H2O} and anhydrous CuSOX4\ce{CuSO4} loses 36.0 g of water on heating. What was the percent Cu by mass in the original mixture?

1.5 Atomic structure and electron configuration

Learn the topic · Practice this topic
  1. QWhat is the ground-state electron configuration of FeX2+\ce{Fe^2+}? (Fe has atomic number 26.)
  2. QWhich ion has the same electron configuration as an argon atom?
  3. QWhich element has the ground-state electron configuration [Ne] 3s2 3p3[\mathrm{Ne}]\,3s^2\,3p^3?
  4. QHow many neutrons are in an atom of xenon-131? (Xe has atomic number 54.)
  5. QCarbon-12 and carbon-13 are isotopes. How do their atoms differ?
  6. QWhich of the following species has the ground-state configuration 1s² 2s² 2p⁶?
  7. QWhich is the ground-state electron configuration of Fe²⁺?
  8. QWhich atom, in its ground state, has exactly two unpaired electrons?
  9. QWhich of the following electron configurations is impossible?
  10. QWhich statement about Br⁻ and Kr is correct?
  11. QIn a single atom of copper, electrons in which subshell experience the greatest attraction to the nucleus?
  12. QHow many unpaired electrons are in a ground-state sulfur atom?
  13. QWhich electron configuration is impossible?
  14. QGallium is [Ar] 3d104s24p13d^{10}4s^2 4p^1. How many valence electrons does it have?
  15. QWhich configuration represents a metal atom in its ground state?
  16. QWhich statement about RbX+\ce{Rb+} and Kr is true?
  17. QIn a zinc atom, electrons in which subshell feel the greatest effective nuclear charge?
  18. QWhich configuration belongs to a transition metal?
  19. QAn atom in an excited state has the configuration 1s22s12p41s^2 2s^1 2p^4. Which element is it?
  20. QWhat is the ground-state configuration of CoX3+\ce{Co^3+}?
  21. QAn element's configuration ends in 5s24d55s^2 4d^5. What is the element?
  22. QWhat is the valence configuration of element 114?
  23. QCopper's configuration is [Ar] 4s13d104s^1 3d^{10} rather than [Ar] 4s23d94s^2 3d^9. Why?

1.6 Photoelectron spectroscopy

Learn the topic · Practice this topic
  1. QA photoelectron spectrum shows three peaks with relative heights 2, 2 and 3, listed from highest to lowest binding energy. Which element is it?
  2. QIn the photoelectron spectrum of magnesium, why is the 1s peak at a much higher binding energy than the 3s peak?
  3. QHow does the 1s peak in the photoelectron spectrum of potassium compare with the 1s peak of sodium?
  4. QA complete PES spectrum has three peaks at 84.0, 4.68 and 2.08 MJ/mol with relative heights 2: 2: 6. Which element is it?
  5. QThe 2s peak of Be is at 0.90 MJ/mol and is twice as tall as the 2s peak of Li, which is at 0.52 MJ/mol. Which statement best explains both observations?
  6. QCompared with phosphorus, the 2p peak of sulfur is at a higher binding energy, but the 3p peak of sulfur (1.00 MJ/mol) is at a slightly lower binding energy than that of phosphorus (1.01 MJ/mol). Which statement best explains this?
  7. QScandium's PES spectrum shows its 4s and 3d peaks close together at low binding energy, and its 3p peak at a much higher binding energy. This best explains why scandium usually forms
  8. QHow many peaks appear in the complete PES spectrum of a potassium atom?
  9. QA PES spectrum of oxygen has a peak at 52.6 MJ/mol. Where is the corresponding peak for nitrogen, and why?
  10. QIn PES, the 1s1s peak of carbon appears at a lower binding energy than the 1s1s peak of nitrogen. Why?
  11. QHow many peaks appear in the PES of chlorine?
  12. QA PES shows five peaks with relative heights 2 : 2 : 6 : 2 : 3, from highest to lowest binding energy. What is the element's configuration?
  13. QThe PES of lithium has peaks at 6.26 MJ/mol and 0.52 MJ/mol. Which orbital produces the 0.52 MJ/mol peak?
  14. QA PES has three peaks with relative heights 2 : 2 : 5. How many unpaired electrons does the atom have?
  15. QFor which group 1 element is the longest-wavelength photon able to remove its valence electron?

1.7 Periodic trends

Learn the topic · Practice this topic
  1. QWhich statement best explains why the first ionization energy of Na is lower than that of Li?
  2. QWhich of these atoms has the smallest atomic radius?
  3. QWhich of these elements has the highest first ionization energy?
  4. QAn element has successive ionization energies of 578, 1817, 2745 and 11,577 kJ/mol. Which element is it most likely to be?
  5. QWhich list puts these ions in order of increasing radius: NaX+\ce{Na+}, FX−\ce{F-}, MgX2+\ce{Mg^2+}, OX2−\ce{O^2-}?
  6. QWhich property generally decreases across period 3 from sodium to chlorine?
  7. QThe valence electron of Na experiences a different effective nuclear charge from a valence electron of Ne. This difference best accounts for which observation?
  8. QWhich of the following lists the species in order of increasing radius?
  9. QThe first ionization energy of nitrogen is greater than that of oxygen. Which statement best explains this?
  10. QAn element has these successive ionization energies (kJ/mol): IE₁ = 787, IE₂ = 1577, IE₃ = 3232, IE₄ = 4356, IE₅ = 16 091. The element is most likely
  11. QWhich atom has the highest electronegativity?
  12. QWhich statement correctly explains why Mg has a smaller atomic radius than Na?
  13. QWhy is the first ionization energy of fluorine greater than that of chlorine?
  14. QAn element's successive ionization energies are 590, 1145, 4912 and 6474 kJ/mol. To which group does it belong?
  15. QRank SX2−\ce{S^2-}, S and SX+\ce{S+} from highest to lowest first ionization energy.
  16. QWhich correctly describes the signs of sulfur's first two ionization energies (IE1_1, IE2_2) and its first two electron affinities (EA1_1, EA2_2)?
  17. QHow many valence electrons does an atom with configuration [Xe] 4f145d106s26p34f^{14}5d^{10}6s^2 6p^3 have?
  18. QThe first ionization energy of Be (899 kJ/mol) is greater than that of B (801 kJ/mol). Why?
  19. QThe first ionization energy of P is greater than that of S. Why?
  20. QWhich hydrogen-atom transition emits the photon of highest frequency?
  21. QWhich set of species is isoelectronic?
  22. QWhich process requires the least energy?
  23. QWhich atom is smaller, Na or Si, and why?
  24. QMendeleev's 1869 table had no place for the noble gases. What is the best reason?
  25. QPotassium reacts with water more vigorously than sodium. Why?
  26. QWhich of these elements is the most electronegative?
  27. QWhich atom has the smallest radius?
  28. QWhy does atomic radius generally decrease across a period?
  29. QA procedure calls for MgO\ce{MgO}, but none is available. Which compound would behave most similarly?
  30. QA hypothetical new element has a valence configuration ending in 8s28s^2. How is it expected to behave?
  31. QWhy is PX3−\ce{P^3-} larger than SX2−\ce{S^2-}?
  32. QWhich gives Na, Mg and Si in order of increasing atomic radius, then increasing first ionization energy?
  33. QWhy is ClX−\ce{Cl-} larger than a Cl atom?
  34. QA binary ionic solid has a 1:1 ratio of ions, and the cation and anion have nearly equal radii. Which is it most likely to be?
  35. QWhich metal has a valence configuration most similar to gold's and would behave most like gold in an alloy?
  36. QRank AlX3+\ce{Al^3+}, MgX2+\ce{Mg^2+} and NaX+\ce{Na+} by increasing radius.
  37. QWhich is a stronger reducing agent than Mg(s)?

1.8 Valence electrons and ionic compounds

Learn the topic · Practice this topic
  1. QWhat is the formula of the ionic compound formed from aluminum and oxygen?
  2. QElement X forms a chloride with the formula XClX2\ce{XCl2}. What is the most likely formula of its oxide?
  3. QAlCl₃ is a known compound. Which of the following is most likely also a stable compound?
  4. QA neutral atom has exactly one unpaired electron, which is in a p orbital. Which pair of ion charges could this element most likely form?
  5. QA student needs Na₂O for an experiment but none is available. Which compound would be the best substitute?
  6. QAn ionic compound has the formula XY₂. Which statement must be true?
  7. QWhen sodium burns in oxygen, a highly exothermic reaction forms Na₂O. Which statement best describes what happens to sodium's valence electron?
  8. QNaCl is a colourless solid that melts at 801 °C. Which compound is expected to have the most similar properties?
  9. QCalcium forms an ionic compound with formula CaQ. To which group does Q belong?
  10. QAn ionic compound has the formula XX2YX3\ce{X2Y3}. What are the likely ion charges?
  11. QGiven that NaX2S\ce{Na2S} exists, which formula is most likely for a compound of potassium and selenium?
  12. QCalcium metal reacts with chlorine gas. What happens to calcium's valence electrons?
  13. QWhich bond fits this description: "the shared electron pair is attracted equally by both atoms"?
  14. QKBr is a colorless, high-melting crystal. Which compound most likely has similar properties?
  15. QA main-group atom has the valence configuration ns2np4ns^2np^4. What ion does it most likely form?
  16. QPhosphorus forms PClX5\ce{PCl5}, but nitrogen does not form NClX5\ce{NCl5}. Why?

Other questions

  1. QWhich term describes the energy required to convert a ground-state atom in the gas phase into a gaseous positive ion?
  2. QWhich electron configuration represents an atom in an excited state?
  3. QWhich configuration represents an atom with exactly four valence electrons?
  4. QWhich of the following is a correct interpretation of the results of Rutherford's experiment, in which alpha particles were fired at thin gold foil?
  5. QIn its ground state, which atom has only one electron in its highest occupied energy sublevel?
  6. QA student heats a hydrate to find its percent water and reports 38%. The correct value is 51%. Which error best explains the low result?
  7. QWhich species has the ground-state electron configuration 1s² 2s² 2p⁶ 3s² 3p⁶?
  8. QBromine has an atomic mass of 79.90 and two naturally occurring isotopes, ⁷⁹Br and ⁸¹Br. The abundance of ⁸¹Br is approximately
  9. QWhich 10.0 g sample contains the greatest number of moles of molecules (or atoms, for a monatomic gas)?
  10. QWhat is the mass percent of nitrogen in ammonium nitrate, NH₄NO₃ (molar mass 80.05 g/mol)?
  11. QA hydrocarbon is 85.6% C and 14.4% H by mass. Its molar mass is 56.1 g/mol. What is its molecular formula?
  12. QA complete PES spectrum has five peaks with relative heights 2: 2: 6: 2: 4 (from highest to lowest binding energy). The element is
  13. QIn the PES spectra of Na and Mg, the 1s peak of Mg appears at a higher binding energy than the 1s peak of Na. The best explanation is that
  14. QWhich list is in order of increasing first ionization energy?
  15. QWhich species has the largest radius?
  16. QThe distances between ion centres are given. Which pair of ions has the strongest Coulombic attraction?
  17. QElement X has the configuration [Ne] 3s² 3p¹ and element Y has the configuration [He] 2s² 2p⁴. What is the most likely formula of the ionic compound formed between X and Y?
  18. QThe first two ionization energies of element Z are 496 kJ/mol and 4562 kJ/mol. What is the most likely formula of the chloride of Z?
  19. QWhich statement best explains why a chloride ion, Cl⁻, is larger than a chlorine atom?
  20. QA mixture of NaCl (60.7% Cl) and KCl (47.6% Cl) is found to be 55.0% Cl by mass. Which statement must be true?
Chat on WhatsApp