AP Chemistry · Unit 1 · 7–9% of the exam

Unit 1 study guide: Atomic Structure and Properties

Unit 1 lays the foundation for the whole course. It starts with counting particles using the mole, then looks inside the atom: isotopes and mass spectra, percent composition and empirical formulas, the composition of mixtures, electron configurations, photoelectron spectroscopy (PES), periodic trends and the charges that atoms take in ionic compounds. One idea links most of the unit: Coulomb's law. The attraction between the nucleus and an electron gets stronger when the charges are larger and weaker when the distance is larger. If you can use that one sentence well, you can explain PES spectra, ionization energies, atomic and ionic radii and the formulas of ionic compounds. The CED gives Unit 1 an exam weighting of 7–9% of the multiple-choice section (about 9–10 class periods), but the ideas appear again in almost every later unit and very often in free-response questions. This unit covers CED topics 1.1 Moles and Molar Mass, 1.2 Mass Spectroscopy of Elements, 1.3 Elemental Composition of Pure Substances, 1.4 Composition of Mixtures, 1.5 Atomic Structure and Electron Configuration, 1.6 Photoelectron Spectroscopy, 1.7 Periodic Trends and 1.8 Valence Electrons and Ionic Compounds.

Atomic masses used in this unit (as on the AP periodic table): H 1.008, B 10.81, C 12.01, N 14.01, O 16.00, Na 22.99, Mg 24.31, Al 26.98, Si 28.09, P 30.97, S 32.06, Cl 35.45, K 39.10, Ca 40.08, Fe 55.85, Cu 63.55, Ga 69.72, Br 79.90, Ag 107.87, Ba 137.33. Constants: Avogadro's number NA = 6.022 × 10²³ mol⁻¹, Planck's constant h = 6.626 × 10⁻³⁴ J·s, speed of light c = 2.998 × 10⁸ m/s.

Topic notes

Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.

Exam-style free-response set

Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.

These questions are modelled on released AP Chemistry free-response questions. The wording, substances and numbers have been changed. Point allocations follow the style of AP scoring guidelines.

FRQ 1 (long answer, 10 points). Modelled on 2021 AP Chemistry FRQ Q2 (parts a, g, h, i), with an added composition part in the style of Topic 1.3.

Answer the following questions about the element magnesium.

(a) The mass spectrum of a pure sample of Mg shows three peaks: m/z = 24 (78.99%), m/z = 25 (10.00%) and m/z = 26 (11.01%).

(i) How many protons and how many neutrons are in the nucleus of an atom of the most abundant isotope of Mg?

(ii) Write the ground-state electron configuration of Mg.

(b) A partial PES spectrum of Mg shows peaks at 126 MJ/mol (relative height 2), 9.07 MJ/mol (height 2) and 5.31 MJ/mol (height 6). Describe the missing peak: give its approximate position relative to the other peaks, its relative height and the subshell it belongs to.

(c) Using principles of atomic structure, explain why the first ionization energy of Ca (590 kJ/mol) is lower than that of Mg (738 kJ/mol).

(d) A single photon with a wavelength of 3.50 × 10⁻⁷ m strikes a gaseous Mg atom.

(i) Calculate the energy of the photon, in joules.

(ii) The first ionization energy of Mg is 738 kJ/mol. Determine whether the photon has enough energy to ionize one Mg atom. Justify your answer with a calculation.

(e) A student heats 0.486 g of Mg in pure oxygen. The product has a mass of 0.806 g.

(i) Determine the empirical formula of the product.

(ii) When Mg is heated in air instead of pure oxygen, some Mg₃N₂ forms as well as the oxide. Mg₃N₂ is 72.2% Mg by mass and MgO is 60.3% Mg by mass. Will the mass of product from 0.486 g of Mg be greater than, less than or equal to 0.806 g? Justify your answer.

Show the solution

(a)(i) Most abundant isotope ²⁴Mg: 12 protons and 24 − 12 = 12 neutrons. (1 point)

(a)(ii) 1s² 2s² 2p⁶ 3s². (1 point)

(b) The missing peak is the 3s peak. It is at a much lower binding energy than the 5.31 MJ/mol peak (about 0.74 MJ/mol, the far right of a spectrum drawn with energy increasing to the left) and has a relative height of 2, the same as the 1s and 2s peaks. (1 point for position, 1 point for height.)

(c) The valence electrons of Ca are in the 4s subshell (n = 4), farther from the nucleus than the 3s valence electrons of Mg (n = 3). The extra protons in Ca are shielded by the extra core electrons, so the effective nuclear charge on the valence electrons is similar (about +2). By Coulomb's law, the greater distance gives a weaker attraction, so less energy is needed to remove an electron from Ca. (1 point for the distance/shell argument; 1 point for linking it to weaker Coulombic attraction.)

(d)(i) E = hc ÷ λ = (6.626 × 10⁻³⁴ J·s)(2.998 × 10⁸ m/s) ÷ (3.50 × 10⁻⁷ m) = 5.68 × 10⁻¹⁹ J. (1 point)

(d)(ii) Energy to ionize one atom = 738 000 J/mol ÷ 6.022 × 10²³ mol⁻¹ = 1.23 × 10⁻¹⁸ J. The photon (5.68 × 10⁻¹⁹ J) has less than half of this, so it cannot ionize the atom. (1 point)

(e)(i) Mass of O = 0.806 − 0.486 = 0.320 g. Moles Mg = 0.486 ÷ 24.31 = 0.0200 mol. Moles O = 0.320 ÷ 16.00 = 0.0200 mol. Ratio 1: 1, so the product is MgO. (1 point)

(e)(ii) Less than 0.806 g. Mg₃N₂ has a higher percent Mg than MgO, so the same mass of Mg combined partly as Mg₃N₂ gives a smaller total mass of product. (1 point)

FRQ 2 (short answer, 4 points). Modelled on 2019 AP Chemistry FRQ Q5.

The complete PES spectrum of an element in its ground state is described below.

Peak Binding energy (MJ/mol) Relative number of electrons
1 347 2
2 37.1 2
3 29.1 6
4 3.93 2
5 2.38 6
6 0.42 1

(a) Based on the spectrum, (i) write the ground-state electron configuration of the element and (ii) identify the element.

(b) Calculate the wavelength, in meters, of electromagnetic radiation needed to remove an electron from the valence shell of one atom of the element.

(c) Explain why peak 3 is at a lower binding energy than peak 2, even though both are in the same shell.

Show the solution

(a)(i) 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹. (1 point) (ii) 19 electrons: potassium, K. (1 point)

(b) E per atom = (0.42 × 10⁶ J/mol) ÷ (6.022 × 10²³ mol⁻¹) = 6.97 × 10⁻¹⁹ J. λ = hc ÷ E = (6.626 × 10⁻³⁴)(2.998 × 10⁸) ÷ (6.97 × 10⁻¹⁹) = 2.85 × 10⁻⁷ m. (1 point)

(c) Peak 3 is the 2p subshell and peak 2 is the 2s subshell. 2s electrons penetrate closer to the nucleus and are less shielded by the 1s electrons than 2p electrons are, so they feel a stronger attraction and need more energy to remove. (1 point)

FRQ 3 (short answer, 4 points). Modelled on 2016 AP Chemistry FRQ Q1(b)–(c) and 2017 AP Chemistry FRQ Q6(b).

Answer the following questions about ions of group 1 and group 2 elements.

Ion Ionic radius (pm)
Na⁺ 102
K⁺ 138

(a) Write the complete ground-state electron configuration of the K⁺ ion.

(b) Using principles of atomic structure, explain why K⁺ is larger than Na⁺.

Reaction Lattice energy (kJ/mol)
CaF₂(s) → Ca²⁺(g) + 2 F⁻(g) 2630
BaF₂(s) → Ba²⁺(g) + 2 F⁻(g) 2352

(c) The lattice energy of BaF₂ is less than that of CaF₂. Explain why, in terms of periodic properties and Coulomb's law.

Show the solution

(a) K⁺: 1s² 2s² 2p⁶ 3s² 3p⁶. (1 point)

(b) The outermost electrons of K⁺ are in the third shell (n = 3), while those of Na⁺ are in the second shell (n = 2). Electrons in a higher shell are, on average, farther from the nucleus, so K⁺ is larger. (1 point)

(c) Ba is below Ca in group 2, so Ba²⁺ has more occupied shells and a larger radius than Ca²⁺ (same charge, 2+). The distance between the centres of Ba²⁺ and F⁻ is therefore larger. By Coulomb's law the attraction is proportional to q₁q₂/r², so with equal charges a larger r gives a weaker attraction and less energy is needed to separate the ions. (1 point for the larger radius of Ba²⁺; 1 point for applying Coulomb's law with equal charges.)

FRQ 4 (long answer, 10 points). Modelled on 2018 AP Chemistry FRQ Q3(g)–(i) and 2011 AP Chemistry FRQ Q2(b)–(c).

A student is given a 5.000 g sample of powdered copper that contains an inert impurity. The student heats the sample in a crucible in excess oxygen until all of the Cu has been converted to CuO(s). The impurity does not react and stays in the crucible. The data are shown below.

Measurement Value
Mass of Cu with inert impurity 5.000 g
Mass of empty crucible 21.384 g
Mass of crucible + solid after heating, first weighing 27.592 g
Mass of crucible + solid after heating, second weighing 27.517 g
Mass of crucible + solid after heating, third weighing 27.517 g

(a) Explain why the student heated and weighed the crucible and solid three times.

(b) Calculate the mass of oxygen that combined with the copper.

(c) Calculate the number of moles of Cu in the original sample.

(d) Calculate the percent by mass of Cu in the original sample.

(e) If the oxidation was incomplete so that some of the product was Cu₂O instead of CuO, would the calculated percent of Cu be higher than, lower than or the same as the actual percent? Justify your answer.

(f) In a separate experiment with pure copper, 1.270 g of Cu forms 1.430 g of an oxide. Determine the empirical formula of this oxide.

(g) A copper–silver alloy (0.6500 g) is dissolved in nitric acid, and all of the silver is precipitated as 0.6215 g of AgCl (molar mass 143.32 g/mol). Calculate the mass percent of Ag in the alloy.

Show the solution

(a) To make sure the reaction was complete. The mass stops changing (two weighings agree at 27.517 g), so all of the Cu has been converted to CuO. (1 point)

(b) Mass of solid after heating = 27.517 − 21.384 = 6.133 g. The impurity's mass does not change, so the gain in mass is the oxygen: 6.133 − 5.000 = 1.133 g O. (1 point)

(c) n(O) = 1.133 g ÷ 16.00 g/mol = 0.07081 mol. In CuO the ratio Cu: O is 1: 1, so n(Cu) = 0.07081 mol. (1 point)

(d) Mass Cu = 0.07081 mol × 63.55 g/mol = 4.500 g. Percent Cu = 4.500 ÷ 5.000 × 100 = 90.00%. (1 point)

(e) Lower. In Cu₂O, each mole of Cu combines with only 0.5 mol of O, compared with 1 mol of O in CuO. So if some Cu₂O formed, the mass gain (oxygen) would be smaller than if all of the Cu formed CuO. The student would calculate fewer moles of Cu (assuming 1: 1) and therefore a lower percent Cu than the actual value. (1 point for the claim; 1 point for the justification.)

(f) Mass O = 1.430 − 1.270 = 0.160 g = 0.0100 mol. Moles Cu = 1.270 ÷ 63.55 = 0.01998 mol. Cu: O = 2.00: 1, so the empirical formula is Cu₂O. (1 point for moles of both elements; 1 point for the formula.)

(g) n(AgCl) = 0.6215 ÷ 143.32 = 0.004336 mol = n(Ag). Mass Ag = 0.004336 × 107.87 = 0.4678 g. Percent Ag = 0.4678 ÷ 0.6500 × 100 = 71.97%. (1 point for moles/mass of Ag; 1 point for the percent.)

Exam-style multiple choice

20 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.

  1. Q1Which term describes the energy required to convert a ground-state atom in the gas phase into a gaseous positive ion?
  2. Q2Which electron configuration represents an atom in an excited state?
  3. Q3Which configuration represents an atom with exactly four valence electrons?
  4. Q4Which of the following is a correct interpretation of the results of Rutherford's experiment, in which alpha particles were fired at thin gold foil?
  5. Q5In its ground state, which atom has only one electron in its highest occupied energy sublevel?
  6. Q6A student heats a hydrate to find its percent water and reports 38%. The correct value is 51%. Which error best explains the low result?
  7. Q7Which species has the ground-state electron configuration 1s² 2s² 2p⁶ 3s² 3p⁶?
  8. Q8Bromine has an atomic mass of 79.90 and two naturally occurring isotopes, ⁷⁹Br and ⁸¹Br. The abundance of ⁸¹Br is approximately
  9. Q9Which 10.0 g sample contains the greatest number of moles of molecules (or atoms, for a monatomic gas)?
  10. Q10What is the mass percent of nitrogen in ammonium nitrate, NH₄NO₃ (molar mass 80.05 g/mol)?
  11. Q11A hydrocarbon is 85.6% C and 14.4% H by mass. Its molar mass is 56.1 g/mol. What is its molecular formula?
  12. Q12A complete PES spectrum has five peaks with relative heights 2: 2: 6: 2: 4 (from highest to lowest binding energy). The element is
  13. Q13In the PES spectra of Na and Mg, the 1s peak of Mg appears at a higher binding energy than the 1s peak of Na. The best explanation is that
  14. Q14Which list is in order of increasing first ionization energy?
  15. Q15Which species has the largest radius?
  16. Q16The distances between ion centres are given. Which pair of ions has the strongest Coulombic attraction?
  17. Q17Element X has the configuration [Ne] 3s² 3p¹ and element Y has the configuration [He] 2s² 2p⁴. What is the most likely formula of the ionic compound formed between X and Y?
  18. Q18The first two ionization energies of element Z are 496 kJ/mol and 4562 kJ/mol. What is the most likely formula of the chloride of Z?
  19. Q19Which statement best explains why a chloride ion, Cl⁻, is larger than a chlorine atom?
  20. Q20A mixture of NaCl (60.7% Cl) and KCl (47.6% Cl) is found to be 55.0% Cl by mass. Which statement must be true?

Unit 1 worksheet

Work these on paper. Show all working and units. Use the atomic masses at the top of the Unit 1 study guide.

  1. Calculate the number of moles of water, the number of water molecules and the number of hydrogen atoms in 45.0 g of H₂O.

  2. Calculate the mass of 3.25 × 10²² molecules of CO₂.

  3. Which contains more atoms, 5.00 g of aluminium or 5.00 g of iron? Explain without doing a full calculation, then check with a calculation.

  4. A mass spectrum of a pure element shows two peaks: m/z = 63 (69.2%) and m/z = 65 (30.8%). Calculate the average atomic mass and identify the element.

  5. Chlorine (35.45) has two isotopes, ³⁵Cl and ³⁷Cl. Using whole-number masses, estimate the percent abundance of each isotope. Describe what its mass spectrum would look like.

  6. Particulate diagrams (described in words). Box A contains six separate, identical grey spheres. Box B contains three identical particles, each made of one grey sphere joined to one white sphere. Box C contains two grey–white particles and two separate pairs of joined white spheres. Classify each box as an element, a compound or a mixture, and explain.

  7. A compound contains 27.3% carbon and 72.7% oxygen by mass. Determine its empirical formula.

  8. A 1.000 g sample of a hydrocarbon burns completely to produce 2.994 g CO₂ and 1.634 g H₂O. Determine its empirical formula.

  9. A compound has the empirical formula CH₂O and a molar mass of 90.08 g/mol. Determine its molecular formula.

  10. A 5.00 g sample of BaCl₂·xH₂O is heated to constant mass. The anhydrous BaCl₂ has a mass of 4.26 g. Determine x.

  11. A 2.00 g sample of impure CaCO₃ is heated strongly. Only CaCO₃ decomposes: CaCO₃(s) → CaO(s) + CO₂(g). The mass decreases by 0.792 g. Calculate the mass percent of CaCO₃ in the sample.

  12. Sample 1 of a compound has a mass of 2.00 g and contains 1.20 g of element X and 0.80 g of element Y. Sample 2 has a mass of 6.25 g and contains 3.75 g of X and 2.50 g of Y. Are the data consistent with the two samples being the same pure compound? Justify with the law of definite proportions.

  13. Write the ground-state electron configurations of Cl, Cl⁻, Mn, Mn²⁺ and Zn²⁺.

  14. State the number of unpaired electrons in a ground-state atom or ion of: (a) Si, (b) P, (c) Fe³⁺.

  15. Use Coulomb's law to rank these ion pairs from weakest to strongest attraction (assume the same distance between ion centres): Na⁺/Cl⁻, Al³⁺/N³⁻, Mg²⁺/Cl⁻.

  16. A complete PES spectrum has peaks at 273, 26.8, 20.2, 2.44 and 1.25 MJ/mol with relative heights 2: 2: 6: 2: 5. (a) Write the electron configuration and identify the element. (b) Describe two ways the spectrum of argon would differ.

  17. The 1s peak of He is at 2.37 MJ/mol, and the 1s peak of Li is at 6.26 MJ/mol. Explain the difference using Coulomb's law.

  18. The successive ionization energies of an element (kJ/mol) are 578, 1817, 2745, 11 577 and 14 842. To which group does the element belong? Write the formula of its oxide.

  19. Arrange N, Al, Si and P in order of decreasing atomic radius. Justify the position of N.

  20. Beryllium has a higher first ionization energy (899 kJ/mol) than boron (801 kJ/mol). Explain this using electron configurations.

  21. Arrange N³⁻, O²⁻, F⁻, Na⁺ and Mg²⁺ in order of increasing radius and explain your order.

  22. Predict the formulas of the ionic compounds formed between: (a) Sr and I, (b) Al and S, (c) Li and N, (d) K and Se.

  23. Data interpretation. The first ionization energies (kJ/mol) for elements 1–20 are: H 1312, He 2372, Li 520, Be 899, B 801, C 1086, N 1402, O 1314, F 1681, Ne 2081, Na 496, Mg 738, Al 578, Si 787, P 1012, S 1000, Cl 1251, Ar 1521, K 419, Ca 590. (a) Which group of elements is found at each maximum and which at each minimum? (b) Explain the sharp drop from Ne to Na. (c) Identify the two places in period 3 where IE decreases although Z increases.

  24. Estimate: (a) the atomic radius of Br, given Cl 99 pm and I 133 pm; (b) the first ionization energy of Rb, given K 419 kJ/mol and Cs 376 kJ/mol. Justify each estimate with a trend.

  25. The first ionization energy of Na is 496 kJ/mol. Calculate the longest wavelength of light that could ionize one Na atom.

  26. A particulate drawing of solid magnesium chloride shows small dark spheres and larger light spheres packed together in a regular pattern. (a) Which ion is represented by the small dark spheres, and why is it smaller? (b) What is the ratio of light spheres to dark spheres?

  27. Potassium reacts more vigorously with water than sodium does. Explain this in terms of atomic structure.

  28. A 0.500 g sample of impure NaCl is dissolved in water, and all of the chloride is precipitated as 1.148 g of AgCl. Assuming the impurity contains no chloride, calculate the mass percent of NaCl in the sample.

Show the answer key
  1. n = 45.0 ÷ 18.02 = 2.50 mol. Molecules = 2.50 × 6.022 × 10²³ = 1.50 × 10²⁴. H atoms = 2 × 1.50 × 10²⁴ = 3.01 × 10²⁴.

  2. n = 3.25 × 10²² ÷ 6.022 × 10²³ = 0.0540 mol. Mass = 0.0540 × 44.01 = 2.38 g.

  3. Aluminium. Al has a smaller molar mass (26.98 vs 55.85), so the same mass contains more moles. Al: 5.00 ÷ 26.98 × 6.022 × 10²³ = 1.12 × 10²³ atoms; Fe: 5.39 × 10²² atoms.

  4. Average = 63(0.692) + 65(0.308) = 63.6. Copper (63.55).

  5. 35x + 37(1 − x) = 35.45 gives x = 0.775: about 77.5% ³⁵Cl and 22.5% ³⁷Cl (true values 75.8% and 24.2%). Two peaks, at m/z = 35 and 37, with the peak at 35 about three times as tall.

  6. A: element (one kind of atom only). B: compound (one kind of particle, made of two different atoms joined in a fixed ratio). C: mixture (two different kinds of particle, a compound and an element).

  7. C: 27.3 ÷ 12.01 = 2.27 mol; O: 72.7 ÷ 16.00 = 4.54 mol. Ratio 1: 2, so CO₂.

  8. Moles C = 2.994 ÷ 44.01 = 0.06803 mol. Moles H = 2 × (1.634 ÷ 18.02) = 0.1814 mol. H: C = 2.667 = 8/3, so multiply by 3: C₃H₈.

  9. Empirical mass = 30.03. n = 90.08 ÷ 30.03 = 3. C₃H₆O₃.

  10. Water = 0.74 g = 0.0411 mol. BaCl₂ = 4.26 ÷ 208.23 = 0.02046 mol. x = 2.01, so x = 2 (BaCl₂·2H₂O).

  11. Mass lost = CO₂ = 0.792 ÷ 44.01 = 0.01800 mol = moles CaCO₃. Mass CaCO₃ = 0.01800 × 100.09 = 1.80 g. Percent = 90.1%.

  12. Yes. Sample 1: 1.20 ÷ 2.00 = 60.0% X. Sample 2: 3.75 ÷ 6.25 = 60.0% X. The mass ratio X: Y is 1.50 in both, as required for a single pure compound.

  13. Cl: 1s² 2s² 2p⁶ 3s² 3p⁵. Cl⁻: 1s² 2s² 2p⁶ 3s² 3p⁶. Mn: [Ar] 4s² 3d⁵. Mn²⁺: [Ar] 3d⁵. Zn²⁺: [Ar] 3d¹⁰.

  14. (a) Si 3p²: 2 unpaired. (b) P 3p³: 3 unpaired. (c) Fe³⁺ 3d⁵: 5 unpaired.

  15. Charge products: Na⁺/Cl⁻ = 1, Mg²⁺/Cl⁻ = 2, Al³⁺/N³⁻ = 9. Weakest to strongest: Na⁺/Cl⁻ < Mg²⁺/Cl⁻ < Al³⁺/N³⁻.

  16. (a) 1s² 2s² 2p⁶ 3s² 3p⁵: chlorine. (b) In Ar every peak is shifted to higher binding energy (one more proton), and the 3p peak is taller (6 electrons instead of 5).

  17. Both are 1s electrons at a similar distance with no shielding shell inside them. Li has 3 protons and He has 2, so the attraction to Li's nucleus is stronger and more energy is needed.

  18. The big jump is after IE₃, so 3 valence electrons: group 13 (this is Al). The oxide is X₂O₃ (Al₂O₃).

  19. Al > Si > P > N. Al, Si and P are in period 3 and shrink left to right as Zeff increases. N is smallest because its valence electrons are in shell n = 2, closer to the nucleus than the n = 3 electrons of the others.

  20. Be: 1s² 2s²; B: 1s² 2s² 2p¹. The electron removed from B is in 2p, which is higher in energy and shielded by the 2s electrons, so it is less strongly attracted than Be's 2s electron, despite B's extra proton.

  21. Mg²⁺ < Na⁺ < F⁻ < O²⁻ < N³⁻. All have 10 electrons. The more protons, the stronger the pull on the same electrons and the smaller the ion (Mg²⁺ has 12 protons, N³⁻ has 7).

  22. (a) SrI₂ (b) Al₂S₃ (c) Li₃N (d) K₂Se.

  23. (a) Maxima: noble gases (He, Ne, Ar). Minima: alkali metals (Li, Na, K). (b) Na's valence electron is in a new shell (n = 3), much farther from the nucleus and shielded by 10 core electrons (Zeff ≈ +1 vs +8 for Ne), so it is far easier to remove. (c) Mg to Al (3s to 3p electron) and P to S (paired 3p electron in S).

  24. (a) Between 99 and 133 pm, about 115 pm (actual 114 pm): radius increases down group 17 as shells are added. (b) Between 376 and 419 kJ/mol, about 400 kJ/mol (actual 403): IE decreases down group 1 because the valence electron is farther from the nucleus.

  25. E per atom = 496 000 ÷ 6.022 × 10²³ = 8.24 × 10⁻¹⁹ J. λ = hc ÷ E = (6.626 × 10⁻³⁴)(2.998 × 10⁸) ÷ 8.24 × 10⁻¹⁹ = 2.41 × 10⁻⁷ m. Longer wavelengths have less energy and cannot ionize the atom.

  26. (a) Mg²⁺. It has lost its whole n = 3 shell (configuration 1s² 2s² 2p⁶), while Cl⁻ has electrons in n = 3. (b) 2: 1 (two Cl⁻ for every Mg²⁺), because the compound is neutral.

  27. K's valence electron is in n = 4, farther from the nucleus than Na's n = 3 electron, with a similar effective nuclear charge. The weaker Coulombic attraction gives K a lower ionization energy (419 vs 496 kJ/mol), so it loses its electron more easily.

  28. n(AgCl) = 1.148 ÷ 143.32 = 0.008010 mol = n(NaCl). Mass NaCl = 0.008010 × 58.44 = 0.4681 g. Percent = 93.6%.

Stuck on a unit? Let us fix it this week.

Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.

Book a session
Chat on WhatsApp