AP Chemistry · Unit 9
Unit 9 practice questions: Thermodynamics and Electrochemistry
174 multiple-choice questions, sorted by topic. Each one has its own page with the answer and a worked explanation. Want a timed run instead? Practice them as a set.
9.1 Introduction to entropy
Learn the topic · Practice this topic- QWhich process involves a decrease in the entropy of the system?
- QX is an unknown element. Which process has the most negative ΔS?
- QA balloon filled with helium is plunged into liquid nitrogen and shrinks. Which describes the helium (the system)?
- QH₂(g) + Cl₂(g) ⇌ 2 HCl(g) is at equilibrium in a closed container. Which change increases the entropy of the system?
- QWhich process shows the largest increase in entropy?
- QTwo flasks of equal volume are joined by a closed stopcock. One holds He(g), the other Ar(g), both at the same T and P. The stopcock is opened and the gases mix at constant temperature. Which statement is correct?
- QWhich process decreases entropy?
- QWhich process has the most negative ?
- QA hot iron bar is cooled in water. What are the signs of and for the iron?
- QFor a gas mixture in a sealed container at constant temperature, which change increases the entropy of the system?
- QAs a substance is heated from solid to gas, during which step does entropy increase the most?
- QWhich sample has the highest molar entropy?
- QWhich reaction decreases the entropy of the system?
- QWhich reaction has a positive ?
- QWhich change shows the largest increase in entropy?
- QTwo different ideal gases are separated by a closed valve. When the valve opens, the gases mix. What happens to the entropy?
9.2 Absolute entropy and entropy change
Learn the topic · Practice this topic- QWhich process has a positive entropy change for the system?
- QWhich reaction has the most negative ?
- QWhich statement is a correct form of the second law of thermodynamics?
- QFor P₄(s) + 5 O₂(g) → P₄O₁₀(s), the standard molar entropies are P₄(s) 165, O₂(g) 205 and P₄O₁₀(s) 230 J/(mol·K). What is ΔS°?
- QSulfur reacts with fluorine: S(s) + 3 F₂(g) → SF₆(g). S° values: S(s) 32, F₂(g) 203, SF₆(g) 292 J/(mol·K). What is ΔS°?
- QS° values: O₃(g) 239, O₂(g) 205, O(g) 161 J/(mol·K). Which process has the largest positive ΔS°?
- QWhich substance has the greatest standard molar entropy at 298 K?
- QWhich statement expresses the second law of thermodynamics?
- QUsing values of 191.6, 130.7 and 192.5 J/(mol·K), what is for ?
- QUsing values of 130.7, 205.2 and 69.9 J/(mol·K), what is for ?
- QUsing values of 304, 240, 191.5 and 205 J/(mol·K), which reaction has the largest positive ?
- QWhat does a reaction with and do?
9.3 Gibbs free energy and thermodynamic favorability
Learn the topic · Practice this topic- QA reaction has and . At which temperatures is it thermodynamically favorable?
- QA process has a positive and a positive . When is it thermodynamically favorable?
- QWhat is at 298 K for a reaction with and ?
- QFor , and . Above about what temperature is the reaction thermodynamically favorable?
- Q has . Compared with 25 °C, the reaction at 95 °C is
- QPotassium reacts with water: 2 K(s) + 2 H₂O(l) → 2 KOH(aq) + H₂(g). ΔH° = −393 kJ/mol_rxn and ΔS° is positive. Which statement is correct?
- QA process has ΔH° = +150. kJ/mol_rxn. At 30 °C the process is at equilibrium under standard conditions (ΔG° = 0). What is ΔS°?
- QSolid ammonium nitrate dissolves readily in water at 25 °C, and the beaker feels cold. Which set of signs is correct for the dissolution?
- QA reaction has ΔH° < 0 and ΔS° < 0. At 25 °C, ΔG° = 0. How can the reaction be made thermodynamically favored?
- QA reversible reaction has ΔH° = +653 kJ/mol_rxn and ΔS° = +1.70 kJ/(mol_rxn·K). Above what temperature is the forward reaction thermodynamically favored?
- QWhich statement best describes a process with ΔG° < 0?
- QFor 2 NO₂(g) → N₂O₄(g), ΔH° = −57.2 kJ/mol_rxn and ΔS° = −175.8 J/(mol_rxn·K). Which is true?
- QA reaction has kJ and J/K. When is it thermodynamically favorable?
- QAt 27 °C, a reaction has kJ and . What is ?
- QA reaction has . What can be concluded about its rate?
- QA strongly exothermic reaction has a small and is favorable at room temperature. What drives it?
- Q dissolves spontaneously in water, and the solution cools. Which is true?
- QWhat defines a thermodynamically favorable process?
- QAt 298 K, a reaction has kJ and J/K. Which describes it?
- QA reaction with and has at 400 K. How can it be made favorable?
- QA reaction has a large negative but is extremely slow. What is the most likely reason?
- QFor , kJ and J/K. Above what temperature is it favorable?
9.4 Thermodynamic and kinetic control
Learn the topic · Practice this topic- QThe conversion of diamond to graphite is thermodynamically favorable at room temperature, yet diamonds do not visibly change. Why?
- QA reaction has ΔH° = −160 kJ/mol_rxn and ΔS° = +600 J/(mol_rxn·K). What can be concluded about the reaction at 200 K?
- QNatural gas (CH₄) leaks into a room full of air. The combustion of methane is strongly thermodynamically favored, yet no reaction occurs until a light switch sparks. Which best explains this?
- QWhich statement about a catalyst added to a thermodynamically favored reaction is correct?
- QA sealed flask contains a mixture of H₂(g) and O₂(g) at 25 °C. After a year, no water has formed, although ΔG° for 2 H₂(g) + O₂(g) → 2 H₂O(l) is −474 kJ/mol_rxn. Which statement is correct?
- QWhat does "thermodynamically favorable" mean?
- QHow can a reaction with be made to produce significant product?
- QSome favorable reactions are not observed at room temperature. Why?
- QPaper burns spontaneously once lit but does not ignite on its own at room temperature. Why?
- QDiamond converting to graphite has , yet diamonds last indefinitely. This is an example of:
9.5 Free energy and equilibrium
Learn the topic · Practice this topic- QIf for a reaction is negative, what is true of its equilibrium constant?
- QA reaction has at 298 K. What is ? ()
- QWhich statement correctly relates ΔG° and K?
- QA reaction has ΔH° = −100. kJ/mol_rxn and ΔS° = −300. J/(mol_rxn·K). At which temperature is K = 1?
- QAt 400 K a reaction has ΔG° = +60 kJ/mol_rxn. Which is true?
- QA reaction at 27 °C has ΔH° = −58 kJ/mol_rxn and ΔS° = −103 J/(mol_rxn·K). What is ln K?
- QAt 298 K, K = 5.1 × 10⁻⁵ for a reaction. What is ΔG°?
- QWhich value of ΔG° at 298 K corresponds to a K closest to 1?
- QWhich is true when ?
- QA reaction has kJ and J/K. At what temperature is ?
- QAt 298 K, a reaction has kJ and . Which is true?
- QOn a graph of free energy against composition, the minimum lies close to pure reactants. What does this mean?
- QAt 500 K, a reaction has kJ. Which is true?
- QAt 400 K, a reaction has kJ and J/K. What is ?
- QAt 298 K, . What is ?
9.6 Coupled reactions
Learn the topic · Practice this topic- QA reaction with is coupled to ATP hydrolysis (). What is of the coupled process?
- QAn overall process A → C occurs in two steps: A → B (ΔG°₁ = +25 kJ) and B → C (ΔG°₂ = −60 kJ). Which statement is correct?
- QMany reactions in living cells have ΔG° > 0, yet they occur continuously. Which best explains this?
- QCaCO₃(s) → CaO(s) + CO₂(g) has ΔG° = +130 kJ/mol_rxn. C(s) + O₂(g) → CO₂(g) has ΔG° = −394 kJ/mol_rxn. A student adds the two equations and claims the overall ΔG° is −264 kJ/mol_rxn, so burning coal next to limestone makes the limestone decompose. What is the main flaw in this claim?
- QWhich of the following uses an external energy source, rather than a coupled chemical reaction, to drive an unfavorable process?
- QStep 1 has , but the overall two-step process has . What must be true?
- QA salt dissolves endothermically but spontaneously. Why?
- QWhy is electricity required for electroplating?
- QGlucose + phosphate → glucose-6-phosphate has kJ. It is coupled with ATP hydrolysis, kJ. What is overall?
- QHow do cells carry out reactions with ?
9.7 Galvanic (voltaic) and electrolytic cells
Learn the topic · Practice this topic- QIn which direction do electrons flow in a galvanic cell?
- QAt which electrode does oxidation occur?
- QWhat is the role of the salt bridge in a galvanic cell?
- QA galvanic cell has a Zn strip in 1.0 M Zn²⁺(aq) and a Cu strip in 1.0 M Cu²⁺(aq). During operation the Zn strip loses mass and the Cu strip gains mass. Which equation represents the cell reaction?
- QA galvanic cell has a Zn strip in 1.0 M Zn²⁺(aq) and a Cu strip in 1.0 M Cu²⁺(aq), joined by a salt bridge containing KNO₃(aq). Which describes the movement of K⁺ ions?
- QA galvanic cell has a Zn strip in 1.0 M Zn²⁺(aq) and a Cu strip in 1.0 M Cu²⁺(aq). As the cell operates, what happens to the concentrations of the ions?
- QA cell is built with a Zn electrode in 1.0 M Zn(NO₃)₂ and an Al electrode in 1.0 M Al(NO₃)₃, joined by a NaNO₃ salt bridge. E°(Al³⁺/Al) = −1.66 V and E°(Zn²⁺/Zn) = −0.76 V. Which statement is correct when the cell operates as a galvanic cell?
- QA student builds a galvanic cell from a Zn strip in 1.0 M Zn²⁺(aq) and a Cu strip in 1.0 M Cu²⁺(aq) (E° = 1.10 V) but forgets the salt bridge. What does the voltmeter read?
- QWhich statement about the electrolysis of aqueous NaCl is correct?
- QMolten MgCl₂ is electrolysed with inert electrodes. What forms at the cathode?
- QA cell uses ( V) and ( V). What is for the spontaneous reaction?
- QA galvanic cell uses ( V) and ( V). What is ?
- QA galvanic cell uses ( V) and ( V). What is the overall cell reaction?
- QIn a galvanic cell, where do the anions in the salt bridge move?
- QA galvanic cell runs on . What happens to over time?
- QA cell uses /Mg (−2.37 V) and /Pb (−0.13 V). What is the sign of for the spontaneous cell reaction?
- QWhat is the sign of for the electrolysis of molten NaCl?
- QA galvanic cell has Mg in and Pb in . Which electrode gains mass?
9.8 Cell potential and free energy
Learn the topic · Practice this topic- QStandard reduction potentials are +0.34 V for and −0.76 V for . What is for a galvanic cell made from these two half-cells?
- QWhat is for a cell reaction that transfers 2 mol of electrons and has ? ()
- QAs a galvanic cell operates and its reaction approaches equilibrium, what happens to the cell voltage?
- QA galvanic cell uses () and (). What is ?
- QUsing Cu²⁺ + 2 e⁻ → Cu (E° = +0.34 V) and Zn²⁺ + 2 e⁻ → Zn (E° = −0.76 V), which is correct for the galvanic cell?
- QA galvanic cell is made from half-cells with standard reduction potentials +0.34 V and −0.44 V. What is E°cell?
- QFor Au⁺ + e⁻ → Au (E° = +1.69 V) and Rh³⁺ + 3 e⁻ → Rh (E° = +0.76 V), which expression gives E° for the galvanic cell 3 Au⁺ + Rh → 3 Au + Rh³⁺?
- QHalf-reactions: Ag⁺ + e⁻ → Ag (E° = +0.80 V) and Cr³⁺ + 3 e⁻ → Cr (E° = −0.74 V). What is E° for a standard galvanic cell made from these half-cells?
- QA redox reaction has K = 1 × 10⁶ at 298 K. Which is correct?
- QFe²⁺ + 2 e⁻ → Fe has E° = −0.44 V. Four metals have reduction potentials for their ions of W: +0.80 V, X: +0.34 V, Y: −1.66 V, Z: −0.13 V. Which metal can reduce Fe²⁺ to Fe in a thermodynamically favored reaction?
- QStandard reduction potentials: Ag⁺/Ag +0.80 V, Cu²⁺/Cu +0.34 V, Zn²⁺/Zn −0.76 V, Al³⁺/Al −1.66 V. Which species is the strongest oxidizing agent among Ag⁺, Cu²⁺, Zn²⁺ and Al³⁺?
- QFor a reaction in an electrochemical cell, ΔG° = +96.5 kJ/mol_rxn and n = 1. What is E°?
- QA galvanic cell uses half-cells with reduction potentials of 0.80 V and −0.76 V. What is ?
- QWhat is for a galvanic cell made from /Ag (0.80 V, 1 electron) and /Al (−1.66 V, 3 electrons)?
- QIn a Zn/Ag galvanic cell, toward which electrode do electrons flow through the wire?
- Q ( V) is to be reduced spontaneously by pairing it with the oxidation of another metal. Which metal works?
- QA redox reaction has . What are the signs of and ?
- QFor a thermodynamically favorable redox reaction under standard conditions:
- QWhich is the strongest oxidizing agent? (Reduction potentials: 2.87, 1.36, 1.07, 0.54 V.)
- QWhich metal is most easily oxidized? (Reduction potentials: Li −3.04, Zn −0.76, Cu 0.34, Ag 0.80 V.)
9.9 Cell potential under nonstandard conditions
Learn the topic · Practice this topic- QIn the Zn/Cu galvanic cell (), is lowered to 0.010 M while stays at 1.0 M. The cell voltage is
- QA galvanic cell is built from Co and Ni electrodes in 1.0 M Co(NO₃)₂ and 1.0 M Ni(NO₃)₂. The reaction is Co(s) + Ni²⁺(aq) → Co²⁺(aq) + Ni(s), E° = +0.03 V. Which change decreases the cell potential?
- QWhen a galvanic battery is "dead", which statement is true?
- QA galvanic cell uses Cu²⁺ + 2 e⁻ → Cu (+0.34 V) and Fe²⁺ + 2 e⁻ → Fe (−0.44 V), starting with 1.0 M solutions. Which describes the cell after it has run for a long time and is close to equilibrium?
- QA galvanic cell runs on Fe(s) + Cu²⁺(aq) → Fe²⁺(aq) + Cu(s), E° = +0.78 V. At 25 °C, which starting concentrations give the largest cell voltage?
- QIn the cell 2 Ag⁺(aq) + Cu(s) → 2 Ag(s) + Cu²⁺(aq), started under standard conditions, [Ag⁺] is increased. What happens to the cell potential?
- QWhich quantities are equal to zero for every electrochemical system at equilibrium?
- QFor ( V), which change increases ?
- QWhen a galvanic cell is completely "dead":
- QA Zn/Cu cell () has been running and is close to equilibrium. Which describes the concentrations?
- QWhich conditions give the highest voltage for a Zn/Cu cell ()?
- QIn a cell running , is decreased. What happens to ?
- QWhich quantities are zero for any system at equilibrium?
- QGiven (0.22 V) and (0.80 V), what can be said about of AgCl?
9.10 Electrolysis and Faraday's law
Learn the topic · Practice this topic- QA current of 2.00 A is passed through a solution of for 965 s. What mass of copper is deposited? (; Cu = 63.55 g/mol)
- QThe same charge is passed through solutions of and . How do the moles of metal deposited compare?
- QA current of 2.0 A passes through 1.0 M PdSO₄(aq). About how long does it take to deposit 100. g of Pd (molar mass 106.42 g/mol) by reduction of Pd²⁺?
- QA steady current deposits 6.0 g of Cu from CuSO₄(aq) in 1.00 × 10⁵ s. What is the current?
- QA current of 6.0 A flows for 200. s. How many moles of electrons are transferred?
- QIn electroplating with Cu²⁺(aq), a current of 20.0 A flows for 1000. s. About how many moles of copper are deposited?
- QWhich expression correctly relates the charge q passed during electrolysis to the moles of electrons, n(e⁻)?
- QThe same quantity of charge is passed through three cells in series containing molten NaCl, molten MgCl₂ and molten AlCl₃. If 0.60 mol of Na is produced, how many moles of Al are produced?
- QWhich combination of measured values can be used to estimate Avogadro's number, N_A, from an electrolysis experiment, given the charge of one electron e = 1.602 × 10⁻¹⁹ C?
- QHow long must a 3.00 A current run to deposit 12.7 g of Cu from a solution?
- Q5.40 g of Ag is deposited from an solution in 1800 s. What current was used?
- QA 4.00 A current flows for 965 s. How many moles of electrons are transferred?
- QA 10.0 A current flows for 1930 s through a solution. How many moles of Ni are deposited?
- QHow long does a 100 A current take to produce 27.0 g of Al from ?
- QWhich equation relates the charge passed to the moles of electrons?
- QThe same charge passes through cells containing , and connected in series. Which deposits the most moles of metal?
- QWhich expression gives Avogadro's number from the Faraday constant and the electron charge ?
Other questions
- QWhich reaction involves the largest decrease in entropy?
- QThe burning of gasoline vapour in a car engine is thermodynamically favored, yet the fuel–air mixture does not react until the spark plug fires. What is the role of the spark?
- QAn electrolytic cell for making zirconium metal uses the half-reaction [ZrF₆]²⁻ + 4 e⁻ → Zr + 6 F⁻. Which statement about this half-reaction is correct?
- QA steady current of 5.0 A passes through molten MgCl₂ for 20. minutes. Which expression gives the mass of Mg produced (molar mass of Mg = 24.3 g/mol; F = 96,485 C/mol e⁻)?
- QIn the electroplating of copper, 0.300 mol of electrons passes through a solution of CuSO₄. What mass of copper is deposited?
- QHalf-reactions: Cu²⁺ + 2 e⁻ → Cu, E° = +0.34 V; Al³⁺ + 3 e⁻ → Al, E° = −1.66 V. What is E° for a standard galvanic cell made from these two half-cells?
- QA galvanic cell has a Pb electrode in 1.0 M Pb(NO₃)₂ and a Pt electrode in a solution that is 1.0 M in both Fe³⁺ and Fe²⁺. E°(Fe³⁺/Fe²⁺) = +0.77 V; E°(Pb²⁺/Pb) = −0.13 V. Which describes what happens to the electrode masses as the cell operates?
- QFor a process with ΔH° > 0 and ΔS° > 0, which statement is correct?
- QFor CO₂(g) + 2 NH₃(g) → CO(NH₂)₂(s) + H₂O(l), ΔH° = −134 kJ/mol_rxn and the reaction is thermodynamically favored at 298 K. Which factor drives the reaction?
- QAt 298 K, a reaction has ΔG° = +2 kJ/mol_rxn. Which is the best estimate of K?
- QReaction 1 has ΔG° = +20 kJ/mol_rxn. Reaction 2 has ΔG° = −45 kJ/mol_rxn. They share a common intermediate and add to give the overall reaction. Which is correct for the overall reaction?
- QA zinc–air cell runs on 2 Zn(s) + O₂(g) → 2 ZnO(s). The cell is taken to the top of a high mountain, where the partial pressure of O₂ is lower. How does the cell potential compare with its value at sea level?
- QLightweight batteries need anodes that release many electrons per gram. If each 1.0 g anode is completely oxidized (Na → Na⁺, Ca → Ca²⁺, Zn → Zn²⁺, Al → Al³⁺), which releases the most electrons?
- QA fresh zinc–air cell (2 Zn(s) + O₂(g) → 2 ZnO(s)) is weighed, used for a week in a hearing aid, and weighed again. How has its mass changed?
- QFor the cell Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s), which change increases the cell potential?
- QAqueous CuBr₂ is electrolysed with inert electrodes. E° values: Cu²⁺/Cu +0.34 V; H₂O/H₂ −0.83 V; Br₂/Br⁻ +1.07 V; O₂/H₂O +1.23 V. What forms at each electrode?
- QDiamond is thermodynamically unstable relative to graphite at 298 K and 1 atm, yet diamonds remain unchanged for millions of years. Which is the best explanation?
- QIn an operating Sn/Cu galvanic cell with a KNO₃ salt bridge, Sn is oxidized. Which particle-level description of the salt bridge is correct?
- QA cell reaction transfers 2 mol of electrons per mole of reaction and has E° = +0.50 V. What is ΔG°?
- QFor which process is ΔS° closest to zero?