Unit 3 study guide: Properties of Substances and Mixtures
Unit 3 is the largest unit on the AP Chemistry exam: it is worth 18–22% of the multiple-choice score and takes about 14–15 class periods. It explains why substances have the physical properties they do. You will learn the forces between particles (intermolecular forces), how those forces decide the properties of solids, liquids and gases, how gases behave (ideal gas law, kinetic molecular theory, and when gases are not ideal), how solutions are described and separated (molarity, particulate diagrams, chromatography, distillation, solubility), and how light interacts with matter (the electromagnetic spectrum, photon energy and the photoelectric effect, and the Beer–Lambert law). The CED topics are 3.1 Intermolecular Forces, 3.2 Properties of Solids, 3.3 Solids, Liquids, and Gases, 3.4 Ideal Gas Law, 3.5 Kinetic Molecular Theory, 3.6 Deviation from Ideal Gas Law, 3.7 Solutions and Mixtures, 3.8 Representations of Solutions, 3.9 Separation of Solutions and Mixtures Chromatography, 3.10 Solubility, 3.11 Spectroscopy and the Electromagnetic Spectrum, 3.12 Photoelectric Effect, and 3.13 Beer–Lambert Law. Almost every free-response section contains at least one "explain in terms of intermolecular forces" question and one gas or spectrophotometry calculation, so this is the longest unit in the course.
Topic notes
Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.
- 3.1 Intermolecular forcesNotes · free response · 24 questions
- 3.2 Properties of solidsNotes · free response · 18 questions
- 3.3 Solids, liquids and gasesNotes · free response · 14 questions
- 3.4 Ideal gas lawNotes · free response · 13 questions
- 3.5 Kinetic molecular theoryNotes · free response · 15 questions
- 3.6 Deviation from ideal gas lawNotes · free response · 13 questions
- 3.7 Solutions and mixturesNotes · free response · 16 questions
- 3.8 Representations of solutionsNotes · free response · 10 questions
- 3.9 Separation of solutions and mixtures (chromatography)Notes · free response · 11 questions
- 3.10 SolubilityNotes · free response · 14 questions
- 3.11 Spectroscopy and the electromagnetic spectrumNotes · free response · 13 questions
- 3.12 Photoelectric effectNotes · free response · 15 questions
- 3.13 Beer-Lambert lawNotes · free response · 16 questions
Exam-style free-response set
Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.
These five questions are modelled on released AP Chemistry free-response questions. The wording, substances and numbers have been changed. Long questions are worth 10 points (about 23 minutes); short questions are worth 4 points (about 9 minutes). Use the AP equation sheet values: R = 0.08206 L·atm/(mol·K), h = 6.626 × 10⁻³⁴ J·s, c = 2.998 × 10⁸ m/s.
Question 1 (long, 10 points) — modelled on 2021 AP FRQ Q3
A student is asked to determine the molar concentration of a NiSO₄(aq) solution by two methods: precipitation and spectrophotometry.
For the precipitation, the student adds 30.0 mL of 0.200 M Ba(NO₃)₂(aq) to 25.0 mL of the NiSO₄(aq). A white precipitate forms. The precipitate is filtered, dried and weighed.
| Measurement | Value |
|---|---|
| Volume of NiSO₄(aq) | 25.0 mL |
| Volume of 0.200 M Ba(NO₃)₂(aq) | 30.0 mL |
| Mass of dry filter paper | 0.812 g |
| Mass of filter paper + dry precipitate | 1.396 g |
(a) Write the balanced net ionic equation for the precipitation reaction.
(b) Calculate the number of moles of precipitate formed.
(c) Show that Ba²⁺ was in excess, and explain why it is necessary for Ba²⁺ to be in excess.
(d) Calculate the molarity of the NiSO₄(aq).
For the spectrophotometry, the student prepares standards from a 0.250 M NiSO₄ stock solution.
(e) Calculate the volume of the 0.250 M stock needed to prepare 50.00 mL of 0.0750 M NiSO₄.
(f) Briefly describe how to prepare the 0.0750 M solution, naming the essential glassware.
(g) The student's calibration line at 395 nm in a 1.00 cm cuvette is A = 5.12c. The unknown NiSO₄ solution has A = 0.508. Calculate its concentration, and calculate the percent difference from the precipitation result.
(h) The student did not dry the precipitate completely before weighing. Will the concentration determined by precipitation be too high, too low or unaffected? Justify.
(i) Explain why NiSO₄(aq) is green and why 395 nm, rather than a wavelength in the green region of the spectrum, is a good choice for the measurement.
Show the solution
(a) Ba²⁺(aq) + SO₄²⁻(aq) → BaSO₄(s). (1 point; spectator ions Ni²⁺ and NO₃⁻ must be omitted)
(b) Mass of BaSO₄ = 1.396 − 0.812 = 0.584 g. Moles = 0.584 g ÷ 233.39 g/mol = 2.50 × 10⁻³ mol. (1 point)
(c) Moles Ba²⁺ added = 0.0300 L × 0.200 M = 6.00 × 10⁻³ mol, which is more than the 2.50 × 10⁻³ mol of BaSO₄ formed, so Ba²⁺ is in excess. Excess Ba²⁺ is needed so that all of the sulfate is precipitated; only then do the moles of precipitate equal the moles of SO₄²⁻ (and NiSO₄) in the sample. (1 point)
(d) Moles NiSO₄ = moles SO₄²⁻ = 2.50 × 10⁻³ mol. M = 2.50 × 10⁻³ mol ÷ 0.0250 L = 0.100 M. (1 point)
(e) V₁ = M₂V₂/M₁ = (0.0750)(50.00 mL)/0.250 = 15.0 mL. (1 point)
(f) Measure 15.0 mL of the stock accurately with a buret or volumetric pipet, transfer it to a 50.00 mL volumetric flask, add distilled water to the calibration mark, stopper and invert to mix. (1 point)
(g) c = 0.508 ÷ 5.12 = 0.0992 M. Percent difference = (0.0992 − 0.100)/0.100 × 100 = −0.8% (the methods agree within about 1%). (2 points: 1 for concentration, 1 for percent difference)
(h) Too high. Water left in the precipitate adds to its measured mass, so the calculated moles of BaSO₄, and therefore the moles and molarity of NiSO₄, are too large. (1 point)
(i) A solution appears the colour of the light it transmits. Ni²⁺(aq) absorbs violet (around 395 nm) and red light and transmits green, so it looks green. The measurement should be made at a wavelength the solution absorbs strongly (λ_max, here 395 nm), where ε is large and the method is most sensitive; at green wavelengths Ni²⁺ absorbs very little. (1 point)
Question 2 (long, 10 points) — modelled on 2013 AP FRQ Q6, 2018 FRQ Q4 and 2015 FRQ Q2(f)
Two compounds have the molecular formula C₃H₈O. Data are given below.
| Compound | Boiling point (°C) | Solubility in water |
|---|---|---|
| P | 97 | miscible in all proportions |
| Q | 7 | moderately soluble |
(a) One compound is 1-propanol, CH₃CH₂CH₂OH; the other is methoxyethane, CH₃OCH₂CH₃. Describe the complete Lewis electron-dot structure of each, including lone pairs.
(b) Identify which compound is P. Justify your answer in terms of the intermolecular forces in each liquid.
(c) Explain why both compounds are at least moderately soluble in water, but P is much more soluble than Q.
(d) Describe a drawing that shows a hydrogen bond between a molecule of Q and a water molecule. Identify the atoms connected by the dashed line.
The table gives data for two other liquids.
| Liquid | Molecular shape | Vapor pressure at 20 °C (mm Hg) | Boiling point (°C) |
|---|---|---|---|
| CHCl₃ | tetrahedral, polar | 160 | 61 |
| CCl₄ | tetrahedral, nonpolar | 89 | 77 |
(e) In terms of intermolecular forces, explain why CHCl₃ has the higher vapor pressure, even though it is polar and CCl₄ is not.
A 1.20 g sample of 1-propanol (60.10 g/mol) is injected into an evacuated, rigid 1.00 L flask and heated to 150. °C, where it vaporizes completely.
(f) Calculate the pressure in the flask, assuming ideal behaviour.
(g) The measured pressure is slightly less than the value in (f). Explain.
(h) The flask is then cooled to 25 °C, and liquid forms. The vapor pressure of 1-propanol at 25 °C is 21 mm Hg. What is the pressure in the flask at 25 °C? Justify.
Show the solution
(a) 1-Propanol: three C atoms in a chain, each C with four single bonds (to H or C), the last C bonded to O; the O bonded to that C and to an H, with two lone pairs on O. Methoxyethane: CH₃–O–CH₂–CH₃; O bonded to two C atoms, with two lone pairs; every C has four single bonds; all H atoms are on C. (1 point for both)
(b) P is 1-propanol. Both molecules have the same number of electrons (34) and similar size, so their London dispersion forces are similar. Both are polar (bent C–O–H or C–O–C), so both have dipole–dipole forces. Only 1-propanol has an H bonded to O, so only 1-propanol has hydrogen bonding between its molecules. The additional, strong hydrogen bonds require more energy to overcome, giving 1-propanol the much higher boiling point. (2 points: 1 for identifying P with hydrogen bonding, 1 for comparing to Q's IMFs)
(c) Both have an O atom with lone pairs that can accept hydrogen bonds from water. 1-Propanol can also donate a hydrogen bond (its O–H) to water molecules, so it forms more and stronger interactions with water, comparable to water–water hydrogen bonds, making it miscible. (1 point)
(d) The water molecule is drawn with one O–H pointing at a lone pair on the O atom of methoxyethane; the dashed line connects the H atom of water to the O atom of methoxyethane. (1 point)
(e) In both liquids, London dispersion forces are the dominant IMF. CCl₄ has 74 electrons and CHCl₃ only 58, so CCl₄ has a larger, more polarizable electron cloud and stronger LDFs. (1 point) The extra LDF strength in CCl₄ outweighs the dipole–dipole forces in CHCl₃, so overall CHCl₃ molecules are held less strongly, more of them escape from the liquid surface at 20 °C, and CHCl₃ has the higher vapor pressure (and lower boiling point). (1 point)
(f) n = 1.20 ÷ 60.10 = 0.01997 mol. P = nRT/V = (0.01997)(0.08206)(423.15) ÷ 1.00 = 0.693 atm. (1 point)
(g) 1-Propanol molecules attract each other (hydrogen bonds, dipole–dipole forces and LDFs). These attractions reduce the frequency and force of collisions with the walls, so the real pressure is less than the ideal value. (1 point)
(h) 21 mm Hg (0.028 atm). Once liquid is present in a closed container, the vapor is in equilibrium with the liquid, and its pressure equals the equilibrium vapor pressure at that temperature, regardless of how much liquid is present. (1 point)
Question 3 (short, 4 points) — modelled on 2021 AP FRQ Q7
A rigid cylinder is fitted with a movable piston of negligible mass, open to the atmosphere at 1.00 atm. It contains 0.250 mol of Ar(g) with a volume of 6.20 L at 30. °C.
(a) Calculate the density of the Ar(g), in g/L.
(b) The student opens a valve, pushes the piston down to release some gas, and closes the valve. The temperature stays at 30. °C and the piston returns to 1.00 atm. Does the density of the remaining argon change? Justify.
(c) The student cools the cylinder to −80. °C at 1.00 atm. Using kinetic molecular theory, explain why the volume decreases.
(d) The student cools the argon further to −183 °C (the boiling point of Ar is −186 °C) and finds that the measured volume is much smaller than the ideal gas law predicts. Assuming the equipment works properly, explain this observation.
Show the solution
(a) D = m/V = (0.250 mol × 39.95 g/mol) ÷ 6.20 L = 1.61 g/L. (Check: D = PM/RT = (1.00)(39.95) ÷ [(0.08206)(303.15)] = 1.61 g/L.) (1 point)
(b) No. D = PM/RT. P (1.00 atm), M and T are all unchanged, so the density is unchanged. Removing gas reduces both the mass and the volume in the same proportion. (1 point)
(c) At lower temperature, the Ar atoms have lower average kinetic energy and move more slowly, so they strike the piston less frequently and with less force. The pressure inside would drop below 1.00 atm, so the outside atmosphere pushes the piston down until the volume is small enough that the collision rate per unit area again balances 1.00 atm. (1 point)
(d) At −183 °C, just above the boiling point, the Ar atoms move slowly and the London dispersion forces between them are significant relative to their kinetic energy. These attractions pull the atoms together, reducing the force and frequency of collisions with the piston, so the gas occupies less volume than an ideal gas (some Ar may begin to condense). (1 point)
Question 4 (short, 4 points) — modelled on 2017 AP FRQ Q4
A student uses paper chromatography (polar paper) with a nonpolar solvent to study three pure dyes, D, E and F, and an unknown that contains one of the dyes. After development, the student records:
| Sample | Distance moved by dye spot (cm) | Distance moved by solvent front (cm) |
|---|---|---|
| D | 1.2 | 8.0 |
| E | 4.8 | 8.0 |
| F | 6.8 | 8.0 |
| Unknown | 4.7 | 7.8 |
(a) Which dye is the least polar? Justify in terms of the interactions between the dyes and the solvent or the paper.
(b) Calculate the Rf value of the unknown and identify the dye it contains.
(c) Explain why the student should compare Rf values rather than distances travelled.
(d) The student repeats the experiment for dye D using a more polar solvent. Predict whether the Rf of dye D will increase, decrease or stay the same. Justify.
Show the solution
(a) Dye F (it travelled farthest, Rf = 0.85). Because F has the weakest attractions to the polar paper and the strongest attractions (relative to the paper) to the nonpolar solvent, it is the least polar. (1 point)
(b) Rf = 4.7/7.8 = 0.60. Rf values: D = 0.15, E = 0.60, F = 0.85. The unknown contains dye E. (1 point)
(c) The solvent front for the unknown moved a different distance (7.8 cm) than for the standards (8.0 cm). Rf divides by the solvent-front distance, so it is independent of how far the solvent happened to travel and can be compared between runs. (1 point)
(d) Increase. Dye D is the most polar. A more polar solvent can form stronger interactions (dipole–dipole or hydrogen bonds) with D, so D spends more time in the mobile phase and moves farther. (1 point)
Question 5 (short, 4 points) — modelled on 2011 AP FRQ Q6 and 2019 FRQ Q4
All the air is pumped out of a rigid 1.50 L flask. Some liquid acetone, C₃H₆O (58.08 g/mol), is injected and the flask is held at 25 °C. After a few minutes the amount of liquid stops decreasing, and some liquid remains. The equilibrium vapor pressure of acetone at 25 °C is 230. mm Hg.
(a) What is the pressure in the flask when the amount of liquid is constant? Justify.
(b) Calculate the mass of acetone present as vapor in the flask.
(c) The flask is heated to 35 °C (liquid still present), and the pressure increases. In terms of kinetic molecular theory, give TWO reasons why the pressure is higher.
(d) A student repeats the experiment at 25 °C in a 3.00 L flask, again with liquid remaining. Will the final pressure be greater than, less than or equal to the pressure in (a)? Justify.
Show the solution
(a) 230. mm Hg. With the rates of evaporation and condensation equal (dynamic equilibrium), the only gas present, acetone vapor, is at its equilibrium vapor pressure. (1 point)
(b) n = PV/RT = (230./760 atm)(1.50 L) ÷ [(0.08206)(298.15 K)] = 0.0186 mol; mass = 0.0186 × 58.08 = 1.08 g. (1 point)
(c) (1) The acetone molecules in the vapor move faster on average, so they collide with the walls more often and with more force. (2) A larger fraction of liquid molecules has enough kinetic energy to escape, so more molecules are in the vapor phase (the vapor pressure increases). (1 point for both)
(d) Equal. Vapor pressure depends only on temperature and the identity of the liquid; as long as liquid remains, more acetone evaporates to fill the larger volume until the pressure is again 230. mm Hg. (1 point)
Exam-style multiple choice
20 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.
- Q1Which substance forms a solid made of discrete molecules held together only by London dispersion forces?
- Q2The boiling points of F₂, Cl₂, Br₂ and I₂ increase in that order. Which statement accounts for this?
- Q3At the same temperature and pressure, which gas deviates most from ideal behaviour?
- Q4A container holds equal numbers of moles of H₂, CH₄ and CO₂ at room temperature. A pinhole allows some of the gas to effuse out. Which statement about the gas remaining in the container is correct?
- Q5At 0 °C, which gas has an average molecular speed closest to that of N₂?
- Q6At 0 °C and 1 atm, which gas has the greatest density?
- Q7A mixture of He and Ar has a total pressure of 1.50 atm. The partial pressure of He is 0.30 atm. What is the mole fraction of Ar?
- Q8A sample of a pure substance is heated at a constant rate. During one time interval the temperature stays constant while the substance changes from liquid to gas. During this interval,
- Q9About how much distilled water must be added to 25.0 mL of 4.00 M NaOH to make 0.500 M NaOH?
- Q10100. mL of 0.30 M Al(NO₃)₃ is added to 200. mL of distilled water. What is [NO₃⁻] in the final solution?
- Q11In a paper chromatography experiment with polar paper and a polar solvent, dye X has R_f = 0.85 and dye Y has R_f = 0.20. Which conclusion is best supported?
- Q12A visible-light spectrophotometer would be most appropriate for
- Q13A 1.00 L sample of a gas at 0 °C and 1.00 atm has a mass of 1.25 g. Which gas could it be?
- Q14When NH₃(l) boils, which interactions are overcome?
- Q15A solution of a dye has A = 0.60 at 0.15 M in a 1.00 cm cuvette. What is the expected absorbance of a 0.050 M solution of the same dye in the same cuvette at the same wavelength?
- Q16How does the energy of a photon of 300 nm light compare with that of a photon of 600 nm light?
- Q17Which pair of liquids is immiscible?
- Q18At 300 K, which gas has the largest fraction of its molecules moving faster than 1500 m/s?
- Q19Which ionic compound is expected to have the highest melting point?
- Q20CH₃F (34 g/mol) boils at −78 °C; CH₃OH (32 g/mol) boils at 65 °C. Which statement best explains the difference?
Unit 3 worksheet
Work these on paper. Show all set-ups with units and significant figures. Use R = 0.08206 L·atm/(mol·K), h = 6.626 × 10⁻³⁴ J·s, c = 2.998 × 10⁸ m/s, Nₐ = 6.022 × 10²³ mol⁻¹, 1 atm = 760 mm Hg = 101.3 kPa.
-
If 4.0 moles of a gas are at a pressure of 5.6 atm in a volume of 12 L, what is the temperature in kelvin?
-
An unknown quantity of gas is at 1.2 atm, 31 L and 87 °C. How many moles of gas are present?
-
7.7 moles of a gas are at 0.090 atm and 56 °C. What is the volume of the container?
-
A car has an internal volume of 2600 L. The sun heats the air inside from 20 °C to 55 °C. The initial pressure was 760 mm Hg and the volume does not change. (a) What is the final pressure in mm Hg? (b) How many moles of gas are in the car?
-
An unknown gas has a mass of 34 g and occupies 6.7 L at 2.0 atm and 245 K. What is its molar mass?
-
A 2.49 g sample of a gas occupies 752 mL at 1.98 atm and 62 °C. Calculate its molar mass and decide whether it is NO₂, SO₃, SO₂ or NH₃.
-
A 12.2 L vessel contains 2.34 g CO₂, 1.73 g SO₂ and 3.33 g Ar at 42 °C. Calculate the total pressure in mm Hg and the partial pressure of Ar.
-
A 3.00 L flask contains He at 632 torr. It is connected through a closed stopcock to a 1.00 L flask containing Ar at 103 torr. The stopcock is opened at constant temperature. Calculate the final partial pressure of each gas and the total pressure.
-
Calculate the volume occupied by 15.0 g of NH₃ gas at 22.8 °C and 124 kPa.
-
Calculate the density of N₂O gas at 1.53 atm and 45.2 °C.
-
A sealed balloon filled with air is moved from a warm room into a freezer and shrinks. Explain this observation using kinetic molecular theory. Refer to particle speed, collisions and pressure.
-
Describe in words how the Maxwell–Boltzmann speed distribution of Kr at 300 K differs from that of Ne at 300 K. Then describe how the Ne curve changes if the temperature is raised to 600 K.
-
How many times faster does He effuse than SF₆ at the same temperature?
-
Identify ALL the intermolecular forces present in each pure substance: (a) CH₃CH₂OH; (b) CO₂; (c) HCl; (d) CH₂Cl₂. Then (e) name the main interaction between Na⁺ and water in NaCl(aq).
-
Rank CH₄, CH₃Cl, CH₃OH and C₈H₁₈ (octane) in order of increasing boiling point. Justify the position of octane.
-
Data table (boiling points of group 16 hydrides):
| Compound | H₂O | H₂S | H₂Se | H₂Te |
|---|---|---|---|---|
| Molar mass (g/mol) | 18.0 | 34.1 | 81.0 | 129.6 |
| Boiling point (°C) | 100 | −60 | −41 | −2 |
(a) Explain the trend from H₂S to H₂Te. (b) Explain why H₂O does not follow the trend. (c) By extending the H₂S–H₂Te trend backwards, estimate what the boiling point of H₂O might be without hydrogen bonding.
-
Solid A melts at 1083 °C and conducts electricity as a solid. Solid B melts at 2852 °C and conducts only when molten. Solid C sublimes at −78 °C. Solid D does not melt below 3500 °C and never conducts. Classify each solid and suggest an example of each.
-
Describe a particulate drawing (in words) of 0.20 M Na₂SO₄(aq) and of 0.10 M Na₂SO₄(aq) in beakers of equal volume, if the 0.10 M beaker shows 3 SO₄²⁻ ions. Include the number of each ion and the orientation of water molecules around each kind of ion.
-
What mass of CuSO₄·5H₂O (249.69 g/mol) is needed to prepare 250.0 mL of 0.100 M CuSO₄? Describe the procedure.
-
10.0 mL of 12.0 M HCl is diluted to a total volume of 500.0 mL. What is the new concentration?
-
In a paper chromatogram (polar paper, water as solvent), the solvent front moves 9.0 cm. A red dye travels 2.7 cm and a blue dye 7.2 cm. Calculate the Rf of each dye and state which dye is more strongly attracted to the water relative to the paper. Justify.
-
Explain, in terms of IMFs and vapor pressure, why distilling a mixture of ethanol and water gives a first distillate that is richer in ethanol.
-
Explain why I₂ dissolves readily in CCl₄ but only slightly in water.
-
The red line in the hydrogen emission spectrum has λ = 656 nm. Calculate its frequency, the energy of one photon, and the energy of one mole of photons in kJ/mol.
-
The threshold wavelength for a certain metal is 450. nm. (a) Calculate the work function in joules. (b) Calculate the maximum kinetic energy of electrons ejected by 300. nm light. (c) Will very bright 500. nm light eject electrons? Explain.
-
A student measures the absorbance of four standards of a red dye at λ_max in a 1.00 cm cuvette:
| Concentration (M) | 0.0010 | 0.0020 | 0.0030 | 0.0040 |
|---|---|---|---|---|
| Absorbance | 0.152 | 0.298 | 0.455 | 0.601 |
(a) Determine the molar absorptivity. (b) An unknown has A = 0.385; find its concentration. (c) The student did not rinse the cuvette with the unknown solution after rinsing with distilled water. What effect does this have on the calculated concentration? Explain.
-
For each radiation, calculate its frequency and identify the type of transition it causes in molecules: (a) λ = 10 cm; (b) λ = 10 μm; (c) λ = 300 nm.
-
For CO₂ at 50 atm and 300 K, PV/nRT is about 0.75. Explain why the value is less than 1, and predict how the value would change if the temperature were raised to 600 K at the same pressure.
Show the answer key
-
T = PV/nR = (5.6)(12)/[(4.0)(0.08206)] = 2.0 × 10² K (205 K).
-
n = PV/RT = (1.2)(31)/[(0.08206)(360 K)] = 1.3 mol.
-
V = nRT/P = (7.7)(0.08206)(329 K)/0.090 = 2.3 × 10³ L.
-
(a) Constant V: P₂ = 760 × (328 K/293 K) = 851 mm Hg (1.12 atm). (b) n = PV/RT = (1.00)(2600)/[(0.08206)(293.15)] = 108 mol (1.1 × 10² mol).
-
M = mRT/PV = (34)(0.08206)(245)/[(2.0)(6.7)] = 51 g/mol.
-
M = (2.49)(0.08206)(335 K)/[(1.98)(0.752)] = 46.0 g/mol: NO₂ (46.01 g/mol).
-
Moles: CO₂ 0.0532, SO₂ 0.0270, Ar 0.0834; total 0.1636 mol. P = (0.1636)(0.08206)(315 K)/12.2 = 0.347 atm = 263 mm Hg. P(Ar) = (0.0834/0.1636)(263) = 134 mm Hg.
-
P(He) = 632 × 3.00/4.00 = 474 torr; P(Ar) = 103 × 1.00/4.00 = 25.8 torr; total = 500. torr.
-
n = 15.0/17.03 = 0.881 mol; P = 124/101.3 = 1.224 atm; V = (0.881)(0.08206)(296.0 K)/1.224 = 17.5 L.
-
D = PM/RT = (1.53)(44.02)/[(0.08206)(318.4 K)] = 2.58 g/L.
-
Cooling lowers the average kinetic energy, so the gas particles move more slowly. They hit the inside of the balloon less often and with less force, so the inside pressure drops below the outside pressure. The balloon shrinks until the smaller volume makes collisions frequent enough to balance the outside pressure again.
-
At 300 K both gases have the same average KE, but Kr (83.8 g/mol) is heavier than Ne (20.2 g/mol): the Kr curve has a taller, narrower peak at lower speed; Ne's is lower, broader and peaks at higher speed. Heating Ne to 600 K shifts its peak to higher speed (×√2), lowers the peak and broadens the curve; the area is unchanged.
-
rate(He)/rate(SF₆) = √(146.06/4.003) = 6.04 times faster.
-
(a) LDF, dipole–dipole, hydrogen bonding. (b) LDF only (linear, nonpolar). (c) LDF, dipole–dipole. (d) LDF, dipole–dipole. (e) Ion–dipole (O end of water toward Na⁺).
-
CH₄ (−162 °C) < CH₃Cl (−24 °C) < CH₃OH (65 °C) < C₈H₁₈ (126 °C). Octane is nonpolar, but it has 66 electrons and a long chain with a large contact area, so its London dispersion forces are stronger than the combined IMFs of the small CH₃OH molecule (18 electrons).
-
(a) H₂S, H₂Se, H₂Te have LDFs and dipole–dipole forces; boiling point rises as the electron cloud gets larger and more polarizable (more electrons → stronger LDFs). (b) H₂O forms extensive hydrogen bonds (H on highly electronegative O, small O with two lone pairs), which are much stronger than the other IMFs, so H₂O boils far higher. (c) Extending the line from −2 (H₂Te) through −41 (H₂Se) and −60 (H₂S) backwards gives roughly −80 to −90 °C (any reasonable estimate well below −60 °C is acceptable).
-
A: metallic (e.g., Cu). B: ionic (e.g., MgO). C: molecular (e.g., CO₂, dry ice). D: covalent network (e.g., diamond or SiC).
-
0.10 M: 3 SO₄²⁻ and 6 Na⁺. 0.20 M: 6 SO₄²⁻ and 12 Na⁺ in the same volume. SO₄²⁻ is drawn as an intact polyatomic ion. Water molecules point their O atoms toward Na⁺ and their H atoms toward SO₄²⁻.
-
Mass = 0.100 × 0.2500 × 249.69 = 6.24 g. Weigh 6.24 g, transfer to a 250.0 mL volumetric flask, dissolve in some distilled water, fill to the mark, stopper and invert to mix.
-
M₂ = (12.0)(10.0)/500.0 = 0.240 M.
-
Rf(red) = 2.7/9.0 = 0.30; Rf(blue) = 7.2/9.0 = 0.80. The blue dye moved farther with the mobile phase, so it is more strongly attracted to water (more water-soluble) relative to the cellulose paper; the red dye is held more strongly by the paper.
-
Ethanol and water both hydrogen-bond, but water forms a more extensive network (two O–H donors and two lone pairs per molecule), so its IMFs are stronger. Ethanol therefore has the higher vapor pressure (lower bp, 78 °C vs 100 °C), so the vapor above the boiling mixture, and the condensed distillate, is enriched in ethanol.
-
I₂ and CCl₄ are both nonpolar and interact only by London dispersion forces, so I₂–CCl₄ attractions are similar to I₂–I₂ and CCl₄–CCl₄ attractions. Dissolving I₂ in water would disrupt strong water–water hydrogen bonds and replace them only with weak dipole–induced dipole and LDF attractions, so little I₂ dissolves.
-
ν = c/λ = 2.998 × 10⁸/(656 × 10⁻⁹) = 4.57 × 10¹⁴ s⁻¹. E = hν = 3.03 × 10⁻¹⁹ J. Per mole: 3.03 × 10⁻¹⁹ × 6.022 × 10²³ = 1.82 × 10⁵ J = 182 kJ/mol.
-
(a) Φ = hc/λ₀ = (6.626 × 10⁻³⁴)(2.998 × 10⁸)/(450. × 10⁻⁹) = 4.41 × 10⁻¹⁹ J. (b) E(300 nm) = 6.62 × 10⁻¹⁹ J; KE = 6.62 × 10⁻¹⁹ − 4.41 × 10⁻¹⁹ = 2.21 × 10⁻¹⁹ J. (c) No. 500 nm is longer than the 450 nm threshold, so each photon has less energy than Φ (3.97 × 10⁻¹⁹ J). Brightness only increases the number of photons, not the energy of each.
-
(a) Slope of A vs. c ≈ 150 M⁻¹ (best fit 150.4); ε = 150 M⁻¹ cm⁻¹ (b = 1.00 cm). (b) c = 0.385/150.4 = 2.56 × 10⁻³ M. (c) Too low: the water left in the cuvette dilutes the unknown, lowering its absorbance and so its calculated concentration.
-
(a) ν = 3.0 × 10⁹ Hz, microwave: rotational transitions. (b) ν = 3.0 × 10¹³ Hz, infrared: vibrational transitions. (c) ν = 1.0 × 10¹⁵ Hz, ultraviolet: electronic transitions.
-
At 50 atm the CO₂ molecules are close together, and the London dispersion forces between them (22 electrons each) are significant. These attractions reduce the force and frequency of collisions with the walls, so PV is smaller than nRT. At 600 K the molecules have much more kinetic energy relative to the energy of attraction, so the attractions matter less and PV/nRT would move closer to 1.
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session