Unit 5 study guide: Kinetics
Unit 5 is about how fast reactions happen and why. Thermodynamics (Unit 6) tells you whether a reaction can happen; kinetics tells you how quickly it does. You will learn to measure and express reaction rates, find rate laws from initial-rate data and from concentration–time data (integrated rate laws and their straight-line graphs), use half-life, write rate laws for elementary steps, explain rates with the collision model and the Maxwell–Boltzmann distribution, read and draw reaction energy profiles, build and test reaction mechanisms (including mechanisms with a slow first step and mechanisms with a fast pre-equilibrium), and explain exactly how catalysts work. Unit 5 is worth 7–9% of the AP exam (about 13–14 class periods) and covers CED topics 5.1 to 5.11. Kinetics shows up very often in the free-response section, usually as a data table or graph to analyze plus a mechanism to judge.
Topic notes
Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.
- 5.1 Reaction ratesNotes · free response · 17 questions
- 5.2 Introduction to rate lawNotes · free response · 20 questions
- 5.3 Concentration changes over timeNotes · free response · 24 questions
- 5.4 Elementary reactionsNotes · free response · 11 questions
- 5.5 Collision modelNotes · free response · 16 questions
- 5.6 Reaction energy profileNotes · free response · 13 questions
- 5.7 Introduction to reaction mechanismsNotes · free response · 13 questions
- 5.8 Reaction mechanism and rate lawNotes · free response · 13 questions
- 5.9 Steady-state approximationNotes · free response · 7 questions
- 5.10 Multistep reaction energy profileNotes · free response · 9 questions
- 5.11 CatalysisNotes · free response · 17 questions
Exam-style free-response set
Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.
These questions are modelled on released AP Chemistry free-response questions. The wording, substances and numbers have been changed; the structure and the skills tested match the originals. Point allocations follow the style of the official scoring guidelines.
FRQ 1 (long, 10 points; modelled on 1999 AP FRQ Q3, 2019 AP FRQ Q6(c) and 2013 AP FRQ Q5(e)).
2 NO(g) + Cl₂(g) → 2 NOCl(g)
A rate study of the reaction above was carried out at a constant temperature.
| Experiment | [NO]₀ (M) | [Cl₂]₀ (M) | Initial rate of appearance of NOCl (M s⁻¹) |
|---|---|---|---|
| 1 | 0.010 | 0.010 | 1.8 × 10⁻⁵ |
| 2 | 0.010 | 0.020 | 3.6 × 10⁻⁵ |
| 3 | 0.030 | 0.010 | 1.62 × 10⁻⁴ |
(a) Calculate the initial rate of disappearance of Cl₂(g) in experiment 1.
(b) Determine the order of the reaction with respect to each reactant. Explain your reasoning in each case.
(c) (i) Write the rate law consistent with the data. (ii) Calculate the rate constant, based on the rate of appearance of NOCl, and give its units.
(d) Calculate the initial rate of appearance of NOCl when [NO]₀ = 0.020 M and [Cl₂]₀ = 0.040 M.
(e) Two mechanisms are proposed.
Mechanism I: NO + Cl₂ → NOCl₂ (slow); NOCl₂ + NO → 2 NOCl (fast)
Mechanism II: NO + Cl₂ ⇌ NOCl₂ (fast equilibrium); NOCl₂ + NO → 2 NOCl (slow)
(i) Is mechanism I consistent with the rate law in (c)? Justify. (ii) Is mechanism II consistent with the rate law in (c)? Justify by deriving its rate law.
(f) ΔH° for the overall reaction is −77 kJ mol⁻¹. Describe the energy profile for mechanism II, assuming the intermediate NOCl₂ is slightly higher in energy than the reactants.
Show the solution
(a) 1 point. One Cl₂ is used for every two NOCl formed: rate of disappearance of Cl₂ = ½ × 1.8 × 10⁻⁵ = 9.0 × 10⁻⁶ M s⁻¹.
(b) 2 points (1 for each order with reasoning). Cl₂: experiments 1 and 2 have the same [NO]; doubling [Cl₂] doubles the rate (3.6/1.8 = 2), so first order in Cl₂. NO: experiments 1 and 3 have the same [Cl₂]; tripling [NO] multiplies the rate by 9 (1.62 × 10⁻⁴ / 1.8 × 10⁻⁵ = 9 = 3²), so second order in NO.
(c) 2 points. (i) Rate = k[NO]²[Cl₂] (1 point). (ii) k = 1.8 × 10⁻⁵ M s⁻¹ ÷ [(0.010 M)²(0.010 M)] = 18 M⁻² s⁻¹ (1 point; units required).
(d) 1 point. Rate = 18 × (0.020)² × 0.040 = 2.9 × 10⁻⁴ M s⁻¹.
(e) 3 points. (i) 1 point: Not consistent. The slow first step is bimolecular, so mechanism I predicts rate = k[NO][Cl₂], first order in NO, but the data show second order in NO. (ii) 2 points: Consistent. Slow step: rate = k₂[NOCl₂][NO]. From the fast equilibrium, k₁[NO][Cl₂] = k₋₁[NOCl₂], so [NOCl₂] = (k₁/k₋₁)[NO][Cl₂] (1 point). Substituting, rate = (k₂k₁/k₋₁)[NO]²[Cl₂] = k[NO]²[Cl₂], which matches (1 point).
(f) 1 point. Two humps (two steps). The first hump is small (fast step), leading to a valley for NOCl₂ + NO slightly above the reactant level. The second hump is taller than the first, measured from the valley (slow, rate-determining step). The curve ends at the product level, 77 kJ mol⁻¹ below the reactants.
FRQ 2 (long, 10 points; modelled on 2012 AP FRQ Q3(d)–(f) and 2016 AP FRQ Q5(a)).
C₂H₅Cl(g) → C₂H₄(g) + HCl(g)
The decomposition of chloroethane is first order. A 3.80 × 10⁻³ mol sample of C₂H₅Cl is placed in an evacuated, rigid 2.00 L container at 720 K. After 15.0 min, [C₂H₅Cl] = 6.50 × 10⁻⁴ M.
(a) Calculate the initial pressure, in atm, in the container.
(b) Calculate the rate constant at 720 K, with units.
(c) Calculate the initial rate of the reaction in M min⁻¹.
(d) Calculate the half-life at 720 K.
(e) Calculate the time needed for [C₂H₅Cl] to fall to 10.0% of its initial value.
(f) If 1/[C₂H₅Cl] were plotted against time, would the plot be a straight line or a curve? Explain.
(g) Calculate the total pressure in the container when 75.0% of the C₂H₅Cl has decomposed (constant T).
(h) Ea for the reaction is 242 kJ mol⁻¹ and ΔH° = +72 kJ mol⁻¹. Calculate Ea for the reverse reaction.
(i) Explain, in terms of molecular collisions, why the half-life is shorter at 750 K than at 720 K.
Show the solution
(a) 1 point. P = nRT/V = (3.80 × 10⁻³ mol)(0.08206 L atm mol⁻¹ K⁻¹)(720 K) ÷ 2.00 L = 0.112 atm.
(b) 2 points. [A]₀ = 3.80 × 10⁻³ mol ÷ 2.00 L = 1.90 × 10⁻³ M (1 point). ln(6.50 × 10⁻⁴) − ln(1.90 × 10⁻³) = −k(15.0 min) gives k = ln(2.923)/15.0 = 1.073/15.0 = 0.0715 min⁻¹ (1 point).
(c) 1 point. Rate = k[A]₀ = 0.0715 min⁻¹ × 1.90 × 10⁻³ M = 1.36 × 10⁻⁴ M min⁻¹.
(d) 1 point. t½ = 0.693 ÷ 0.0715 min⁻¹ = 9.69 min.
(e) 1 point. ln(0.100) = −0.0715t, so t = 2.303 ÷ 0.0715 = 32.2 min.
(f) 1 point. A curve. For a first-order reaction ln[A] vs. t is linear; 1/[A] vs. t is linear only for second order.
(g) 1 point. For every mole of C₂H₅Cl that reacts, 2 moles of gas form. Moles of gas = 0.250n₀ + 2(0.750n₀) = 1.75n₀, so P = 1.75 × 0.112 atm = 0.196 atm.
(h) 1 point. Ea,reverse = Ea,forward − ΔH = 242 − 72 = 170 kJ mol⁻¹.
(i) 1 point. At higher temperature a larger fraction of C₂H₅Cl molecules have energy ≥ Ea (and collisions are more frequent), so k is larger and t½ = 0.693/k is shorter.
FRQ 3 (short, 4 points; modelled on 2014 AP FRQ Q7).
The catalyzed isomerization of gaseous compound A to compound B is studied under several conditions.
| Trial | Initial P of A (torr) | V (L) | T (K) | t½ (s) |
|---|---|---|---|---|
| 1 | 400. | 1.00 | 500. | 80. |
| 2 | 800. | 1.00 | 500. | 80. |
| 3 | 400. | 2.00 | 500. | 80. |
| 4 | 400. | 1.00 | 520. | 35 |
(a) The reaction is first order. Explain how the data are consistent with this.
(b) Calculate k at 500 K, with units.
(c) Is the initial rate in trial 2 greater than, less than, or equal to the initial rate in trial 1? Justify.
(d) Explain, in terms of activation energy, why the half-life in trial 4 is shorter than in trial 1.
Show the solution
(a) 1 point. At 500 K the half-life is 80 s whether the initial pressure (concentration) is 400 or 800 torr, or the volume is changed. A half-life that does not depend on initial concentration is a property of first-order reactions.
(b) 1 point. k = 0.693 ÷ 80. s = 8.7 × 10⁻³ s⁻¹.
(c) 1 point. Greater (twice as large). Rate = k[A]; k is the same at the same temperature, and [A] in trial 2 is twice that in trial 1.
(d) 1 point. At the higher temperature, a larger fraction of molecules have kinetic energy equal to or greater than the activation energy, so more collisions are effective per second, k is larger, and t½ is shorter.
FRQ 4 (short, 4 points; modelled on 2018 AP FRQ Q7(b)–(c) and 1999 released MC Q48).
The medical isotope technetium-99m decays with a half-life of 6.0 h.
(a) Calculate the rate constant for the decay, with units.
(b) A sample contains 256 atoms of Tc-99m. What is the expected time until only one atom remains? Show your reasoning.
(c) A patient receives 10.0 μg of Tc-99m. Calculate the mass remaining after 24.0 h.
(d) A student says the half-life would be shorter if the patient had a fever. Respond.
Show the solution
(a) 1 point. k = 0.693 ÷ 6.0 h = 0.12 h⁻¹ (0.1155 h⁻¹).
(b) 1 point. 256 = 2⁸, so 8 half-lives are needed: 8 × 6.0 h = 48 h.
(c) 1 point. 24.0 h = 4 half-lives; 10.0 μg × (½)⁴ = 0.625 μg.
(d) 1 point. The student is wrong. Radioactive decay is a nuclear process that is first order and is not affected by temperature (or chemical environment), so the half-life stays 6.0 h.
FRQ 5 (short, 4 points; modelled on 2017 AP FRQ Q2(e)–(f) and 2015 AP FRQ Q5(c)).
A student studies the decomposition of urea in basic solution, CO(NH₂)₂(aq) → NH₄⁺(aq) + OCN⁻(aq), at 90 °C and pH 13.
| t (min) | 0 | 600 | 1200 | 1800 |
|---|---|---|---|---|
| [urea] (M) | 0.100 | 0.0500 | 0.0250 | 0.0125 |
(a) The student proposes rate = k[CO(NH₂)₂]. Explain how the data support this.
(b) Calculate k, with units.
(c) Describe an experiment to find out whether the rate depends on [OH⁻]. Include what you would change, what you would keep the same, what you would measure, and how you would interpret the results.
Show the solution
(a) 1 point. The concentration halves every 600 min (0.100 → 0.0500 → 0.0250 → 0.0125). A constant half-life shows first order in urea.
(b) 1 point. k = 0.693 ÷ 600 min = 1.16 × 10⁻³ min⁻¹.
(c) 2 points. Repeat the experiment at the same temperature (90 °C) and the same initial [urea] (0.100 M), but at a different [OH⁻], for example pH 12 ([OH⁻] = 0.010 M) instead of pH 13 ([OH⁻] = 0.10 M) (1 point). Measure [urea] over time and find the new half-life or rate constant (or initial rate). If the rate (k′) is unchanged, the rate does not depend on [OH⁻]; if it changes (for example, falls by a factor of 10 when [OH⁻] falls by a factor of 10, which would mean first order in OH⁻), the rate depends on [OH⁻] (1 point).
Exam-style multiple choice
20 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.
- Q1If 75.0% of a sample of phosphorus-32 decays in 28.6 days, what is its half-life?
- Q2The percent of reactant remaining was recorded. Time (min): 0, 10, 30, 70 % remaining: 100, 50, 25, 12.5 Which describes the reaction?
- Q3For an elementary step, Ea,forward = 120 kJ mol⁻¹ and Ea,reverse = 80 kJ mol⁻¹. Which is correct?
- Q4For 2 NO₂(g) + F₂(g) → 2 NO₂F(g), the mechanism is NO₂ + F₂ → NO₂F + F (slow); NO₂ + F → NO₂F (fast). Which rate law agrees?
- Q5Compound X reacts with a large excess of Y. A plot of ln[X] vs. time is a straight line. Which conclusion is justified?
- Q6Equal masses of CaCO₃ as large chips and as fine powder are added to separate beakers of excess 1.0 M HCl at the same temperature. Compared with the chips, the powder will
- Q7Initial-rate data: Exp. 1: [A]₀ (M) = 0.10; [B]₀ (M) = 0.10; Initial rate (M s⁻¹) = 2.0 × 10⁻³ Exp. 2: [A]₀ (M) = 0.20; [B]₀ (M) = 0.10; Initial rate (M s⁻¹) = 8.0 × 10⁻³ Exp. 3: [A]₀ (M) = 0.20; [B]₀ (M) = 0.20; Initial rate (M s⁻¹) = 8.0 × 10⁻³ What is the rate law?
- Q8For rate = k[A]²[B], both [A] and [B] are tripled. By what factor does the rate change?
- Q9What are the units of k for a reaction with rate = k[A]²?
- Q10For 2 N₂O₅(g) → 4 NO₂(g) + O₂(g), NO₂ appears at 8.0 × 10⁻⁴ M s⁻¹. At what rate does O₂ appear?
- Q11A first-order reaction has k = 0.0347 min⁻¹. About what percent of the reactant remains after 60 min?
- Q12A second-order reaction has k = 0.50 M⁻¹ s⁻¹ and [A]₀ = 0.20 M. What is [A] after 30 s?
- Q13A reaction is zero order. [A] falls from 0.80 M to 0.50 M in 60 s. How much longer until A is used up?
- Q14A match does not light until it is struck. The friction of striking
- Q15Mechanism: 2 A ⇌ A₂ (fast equilibrium); A₂ + B → C (slow). What is the rate law?
- Q16A multistep energy profile has two peaks and one valley; the second peak is higher above the valley than the first peak is above the reactants. Which is correct?
- Q17Which statement about a catalyst for a reversible reaction is correct?
- Q18A first-order gas reaction is run twice in the same rigid container at the same temperature, once with 300 torr and once with 600 torr of reactant. Which is true?
- Q19Which elementary step is least likely to occur as written?
- Q20In the mechanism H₂O₂ + I⁻ → H₂O + IO⁻ (slow); H₂O₂ + IO⁻ → H₂O + O₂ + I⁻ (fast), which pair is correct?
Unit 5 worksheet
Work these on paper. Show all working and units. Answers are in the key that follows.
-
For 4 PH₃(g) → P₄(g) + 6 H₂(g), P₄ forms at 4.2 × 10⁻³ M s⁻¹. Calculate the rate at which PH₃ disappears and the rate at which H₂ forms.
-
[A] is 0.500 M at t = 0 and 0.380 M at t = 40. s. Calculate the average rate of disappearance of A.
-
Explain, at the particle level, why powdered zinc reacts faster with 1.0 M HCl than the same mass of zinc granules.
-
For 2 ClO₂(aq) + 2 OH⁻(aq) → ClO₃⁻(aq) + ClO₂⁻(aq) + H₂O(l):
| Exp. | [ClO₂]₀ (M) | [OH⁻]₀ (M) | Initial rate (M s⁻¹) |
|---|---|---|---|
| 1 | 0.060 | 0.030 | 2.48 × 10⁻² |
| 2 | 0.020 | 0.030 | 2.76 × 10⁻³ |
| 3 | 0.020 | 0.090 | 8.28 × 10⁻³ |
(a) Determine the order in each reactant, with reasoning. (b) Write the rate law. (c) Calculate k with units.
-
A reaction has rate = k[A]^½[B]. What are the units of k (rate in M s⁻¹)?
-
For rate = k[A][B]², [A] is doubled and [B] is halved. By what factor does the rate change?
-
A first-order reaction has k = 5.0 × 10⁻³ s⁻¹ and [A]₀ = 0.80 M. (a) Calculate [A] after 3.0 min. (b) Calculate t½.
-
For the decomposition of A, these data were collected:
| t (s) | 0 | 50 | 100 | 150 |
|---|---|---|---|---|
| [A] (M) | 0.400 | 0.243 | 0.147 | 0.0893 |
(a) Calculate ln[A] and 1/[A] for each time. (b) Determine the order with respect to A and justify. (c) Determine k.
-
A second-order reaction (rate = k[A]²) has k = 1.2 M⁻¹ min⁻¹ and [A]₀ = 0.050 M. (a) Calculate the first half-life. (b) Calculate the time for [A] to fall to 0.010 M.
-
Carbon-14 has t½ = 5730 years. A wooden object contains 1/8 of the C-14 found in living wood. How old is it?
-
What percent of a first-order reactant remains after (a) 5 half-lives, (b) 8 half-lives?
-
For a first-order reaction, [A] falls from 1.25 M to 0.955 M in 69.2 s. Calculate k and t½.
-
A first-order reaction is 50% complete in 24 h. How long does it take to be 90% complete?
-
Write the rate law and molecularity for each elementary step: (a) Cl₂ → 2 Cl (b) Cl + H₂ → HCl + H (c) 2 NO + Cl₂ → 2 NOCl.
-
The oxidation of SO₂ can be catalyzed by NO: Step 1: 2 NO + O₂ → 2 NO₂; Step 2: NO₂ + SO₂ → NO + SO₃ (occurs twice). (a) Write the overall equation. (b) Identify the catalyst and the intermediate. Justify each.
-
For 2 NO₂(g) + O₃(g) → N₂O₅(g) + O₂(g), the mechanism is NO₂ + O₃ → NO₃ + O₂ (slow); NO₃ + NO₂ → N₂O₅ (fast). (a) Show that the steps add to the overall equation. (b) Write the predicted rate law. (c) What is the order with respect to the second NO₂ molecule's step, and why?
-
For H₂(g) + Br₂(g) → 2 HBr(g), the start of a mechanism is Br₂ ⇌ 2 Br (fast equilibrium); Br + H₂ → HBr + H (slow). Derive the rate law.
-
The experimental rate law for 2 A + B → A₂B is rate = k[A]²[B]. Which mechanism(s) are consistent? Explain each. Mechanism X: A + B → AB (slow); AB + A → A₂B (fast). Mechanism Y: 2 A ⇌ A₂ (fast equilibrium); A₂ + B → A₂B (slow). Mechanism Z: A + A → A₂ (slow); A₂ + B → A₂B (fast).
-
Describe how the Maxwell–Boltzmann distribution of a gas changes from 300 K to 400 K, and use it to explain why reactions are faster at 400 K. Your answer should mention the area beyond Ea.
-
An elementary step has Ea = 52 kJ mol⁻¹ and ΔH = +18 kJ mol⁻¹. (a) Is it exothermic or endothermic? (b) Calculate Ea for the reverse step. (c) Give the relative energies of reactants, transition state and products.
-
A two-step reaction has energies (kJ mol⁻¹): reactants 0, TS1 +62, intermediate +15, TS2 +48, products −40. (a) Calculate Ea for each step. (b) Which step is rate determining? (c) What is ΔH overall? (d) What is Ea for the reverse of step 2?
-
Explain why adding a catalyst to a reaction at equilibrium does not change the amounts of reactants and products.
-
Particulate representation: a rigid box at t = 0 contains 16 A₂ molecules and nothing else. The decomposition A₂ → 2 A is first order with t½ = 30 s. Describe the contents of the box (numbers of A₂ molecules and A atoms) at t = 30, 60 and 90 s.
-
Three students graph initial rate (y-axis) against [Q] (x-axis) for three different reactions. Graph 1 is a horizontal line. Graph 2 is a straight line through the origin. Graph 3 is a curve through the origin that gets steeper. State the order in Q for each.
-
A student measures the rate of Mg(s) + 2 HCl(aq) → MgCl₂(aq) + H₂(g) by collecting H₂ in a gas syringe. (a) Name the measurement that gives the rate. (b) List three variables that must be kept constant when testing the effect of [HCl]. (c) Why should the initial rate be used rather than the rate near the end?
-
Acid catalysis: S + H⁺ ⇌ SH⁺ (fast equilibrium); SH⁺ + H₂O → P + H₃O⁺ (slow). (a) Write the overall equation (in water, H₃O⁺ is the same as H⁺ + H₂O). (b) Derive the rate law (water is the solvent and does not appear). (c) Is H⁺ a catalyst? Justify.
-
Crystal violet reacts with excess OH⁻. With [OH⁻] = 0.010 M, the observed first-order rate constant is k′ = 3.5 × 10⁻³ s⁻¹; with [OH⁻] = 0.020 M, k′ = 7.0 × 10⁻³ s⁻¹. (a) What is the order in OH⁻? (b) Calculate k in rate = k[CV⁺][OH⁻].
Show the answer key
-
−Δ[PH₃]/Δt = 4 × 4.2 × 10⁻³ = 1.68 × 10⁻² M s⁻¹ (1.7 × 10⁻²). Δ[H₂]/Δt = 6 × 4.2 × 10⁻³ = 2.52 × 10⁻² M s⁻¹ (2.5 × 10⁻²).
-
(0.500 − 0.380) ÷ 40. = 3.0 × 10⁻³ M s⁻¹.
-
Only Zn atoms on the surface can be hit by H⁺ ions. Powder has far more surface area, so there are more collisions per second between H⁺ and Zn, and more effective collisions per second.
-
(a) Exp 2 → 3: [ClO₂] constant, [OH⁻] × 3, rate × 3 (8.28/2.76 = 3.0): first order in OH⁻. Exp 2 → 1: [OH⁻] constant, [ClO₂] × 3, rate × 9 (24.8/2.76 = 9.0): second order in ClO₂. (b) Rate = k[ClO₂]²[OH⁻]. (c) k = 2.48 × 10⁻² ÷ [(0.060)²(0.030)] = 2.3 × 10² M⁻² s⁻¹ (229.6).
-
Overall order 1.5, so k has units M^(1−1.5) s⁻¹ = M^(−½) s⁻¹.
-
2 × (½)² = 0.5; the rate is halved.
-
(a) t = 180 s: [A] = 0.80 e^(−0.90) = 0.33 M (0.325). (b) t½ = 0.693 ÷ 5.0 × 10⁻³ = 1.4 × 10² s (139 s).
-
(a) ln[A]: −0.916, −1.415, −1.917, −2.416. 1/[A]: 2.50, 4.12, 6.80, 11.2 M⁻¹. (b) ln[A] falls by 0.500 every 50 s (linear), while 1/[A] rises by unequal amounts: first order. (c) k = −slope = 0.500 ÷ 50 s = 0.0100 s⁻¹.
-
(a) t½ = 1/(k[A]₀) = 1/(1.2 × 0.050) = 17 min (16.7). (b) 1/0.010 − 1/0.050 = 1.2t; 100 − 20 = 80 = 1.2t; t = 67 min.
-
1/8 = (½)³, so 3 half-lives: 3 × 5730 = 17 190 years (about 1.72 × 10⁴ years).
-
(a) (½)⁵ = 3.125% (3.13%). (b) (½)⁸ = 0.39%.
-
k = −ln(0.955/1.25) ÷ 69.2 s = 0.2692 ÷ 69.2 = 3.89 × 10⁻³ s⁻¹. t½ = 0.693 ÷ 3.89 × 10⁻³ = 178 s.
-
k = 0.693 ÷ 24 h = 0.0289 h⁻¹. 90% complete means 10% remains: t = ln(10) ÷ 0.0289 = 2.303 ÷ 0.0289 = 80. h (79.7).
-
(a) Rate = k[Cl₂]; unimolecular. (b) Rate = k[Cl][H₂]; bimolecular. (c) Rate = k[NO]²[Cl₂]; termolecular (rare).
-
(a) Step 1 + 2 × step 2: 2 NO + O₂ + 2 NO₂ + 2 SO₂ → 2 NO₂ + 2 NO + 2 SO₃, which simplifies to 2 SO₂ + O₂ → 2 SO₃. (b) NO is the catalyst: used in step 1 and regenerated in step 2 (net amount unchanged). NO₂ is the intermediate: made in step 1 and used in step 2.
-
(a) Sum: 2 NO₂ + O₃ + NO₃ → NO₃ + O₂ + N₂O₅; cancel NO₃: 2 NO₂ + O₃ → N₂O₅ + O₂. (b) Rate = k[NO₂][O₃]. (c) The second NO₂ reacts only in the fast step after the slow step, so it does not affect the rate. The reaction is first order (not second order) in NO₂.
-
Slow step: rate = k₂[Br][H₂]. From the equilibrium, K₁ = [Br]²/[Br₂], so [Br] = (K₁[Br₂])^½. Rate = k₂K₁^½[Br₂]^½[H₂] = k[Br₂]^½[H₂].
-
X: slow step A + B gives rate = k[A][B]: not consistent. Y: [A₂] = K₁[A]², so rate = k₂[A₂][B] = k[A]²[B]: consistent. Z: slow step A + A gives rate = k[A]²: not consistent (no B). Only Y is consistent, and all three add to 2 A + B → A₂B.
-
At 400 K the curve is flatter and wider; its peak is lower and at higher energy; the total area (number of molecules) is the same. The area to the right of Ea is much larger at 400 K, so a larger fraction of molecules (and collisions) have energy ≥ Ea. More effective collisions per second means a faster rate and a larger k. (Collisions are also a little more frequent.)
-
(a) Endothermic (ΔH > 0). (b) Ea,reverse = 52 − 18 = 34 kJ mol⁻¹. (c) Reactants 0; transition state +52; products +18 kJ mol⁻¹.
-
(a) Step 1: 62 − 0 = 62 kJ mol⁻¹. Step 2: 48 − 15 = 33 kJ mol⁻¹. (b) Step 1 (larger Ea). (c) ΔH = −40 kJ mol⁻¹. (d) 48 − (−40) = 88 kJ mol⁻¹.
-
A catalyst lowers the activation energy of the forward and reverse reactions by the same amount, so both rates increase by the same factor. The forward and reverse rates stay equal, K is unchanged (ΔH and ΔG° are unchanged), and the composition stays the same. The catalyst only makes equilibrium form faster.
-
t = 30 s: 8 A₂ and 16 A. t = 60 s: 4 A₂ and 24 A. t = 90 s: 2 A₂ and 28 A. (Each half-life halves the number of A₂; each A₂ that reacts gives 2 A, so A₂ × 2 + A = 32 atoms of A in total at all times.)
-
Graph 1: zero order. Graph 2: first order. Graph 3: second order (or higher; rate ∝ [Q]²).
-
(a) Volume of H₂ collected per unit time (the slope of volume vs. time at the start). (b) Temperature, mass (and surface area/form) of Mg, volume of acid (also the same apparatus and stirring). (c) At the start the concentrations are known exactly (the starting values) and no product has built up; later, [HCl] has dropped by an unknown amount and the rate is slowing.
-
(a) S + H⁺ + H₂O → P + H₃O⁺, which is the same as S → P (H⁺ is regenerated). (b) Rate = k₂[SH⁺] (solvent water not included) = k₂K₁[S][H⁺] = k[S][H⁺]. (c) Yes: H⁺ is used in step 1 and regenerated (as H₃O⁺) in step 2, so its net amount is unchanged, and it provides a new lower-energy pathway through the intermediate SH⁺.
-
(a) Doubling [OH⁻] doubles k′ (3.5 → 7.0 × 10⁻³), so first order in OH⁻. (b) k = k′/[OH⁻] = 3.5 × 10⁻³ ÷ 0.010 = 0.35 M⁻¹ s⁻¹ (the same from 7.0 × 10⁻³ ÷ 0.020).
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session