AP Chemistry · Unit 6

Unit 6 practice questions: Thermochemistry

128 multiple-choice questions, sorted by topic. Each one has its own page with the answer and a worked explanation. Want a timed run instead? Practice them as a set.

6.1 Endothermic and exothermic processes

Learn the topic · Practice this topic
  1. QWhen solid NHX4NOX3\ce{NH4NO3} dissolves in water, the solution gets colder. Which statement is correct?
  2. QWhen solid NHX4NOX3\ce{NH4NO3} dissolves in water in a cold pack, the pack gets cold. The dissolving process is
  3. QWhen a salt dissolves in water, which of the following steps is exothermic?
  4. QA few drops of water are added to white anhydrous copper(II) sulfate, CuSO₄(s), and the mixture becomes warm. Which statement best explains this observation?
  5. QWhich process is endothermic?
  6. QHCl(aq) and NaOH(aq) are mixed in an insulated cup. The temperature of the mixture rises from 27.0 °C to 33.0 °C. Which statement is correct?
  7. QFor an exothermic reaction A + B → C, which statement about chemical potential energy is correct?
  8. QWater is boiled inside a cylinder fitted with a movable, frictionless piston at constant pressure. Which statement is correct?
  9. QDissolving a solute takes three steps. Which step is exothermic?
  10. QNaOH pellets dissolving in water make the solution hot. Why?
  11. QWhich process is endothermic?
  12. QSolid NHX4Cl\ce{NH4Cl} dissolves, and the solution becomes colder. Which is true?
  13. QWhich process is endothermic?
  14. QIn an endothermic reaction, how does the chemical potential energy of the products compare with that of the reactants?
  15. QAn energy diagram shows the products higher in energy than the reactants. What happens to the surroundings?
  16. QA cold metal is placed in hot water. The metal's energy changes by +45 J. Assuming no losses, what is the water's energy change?
  17. QA gas in a cylinder with a movable piston is cooled at constant pressure. What happens?
  18. QA gas is heated at constant pressure. What happens to its volume?

6.2 Energy diagrams

Learn the topic · Practice this topic
  1. QOn an energy diagram the products are lower in energy than the reactants. The reaction is
  2. QFor the reaction X + Y₂Z → 2 Y + XZ, an energy diagram shows the reactants at 20 kJ and the products at 70 kJ (per mole of reaction as written). How much energy is absorbed when 3 mol of Y is formed?
  3. QAn energy diagram for a reaction shows the reactant line at 120 kJ, the top of the hump at 200 kJ and the product line at 40 kJ. Which values are correct for the forward reaction?
  4. QA catalyst is added to a reaction. Which change appears on its energy diagram?
  5. QWhich description matches an energy diagram for the process H₂O(l) → H₂O(g)?
  6. QThe reaction 2 A+B⟶C+3 D\ce{2A} + \ce{B} \longrightarrow \ce{C} + \ce{3D} absorbs 60 kJ as written. How much energy is absorbed when 1.5 mol of D forms?
  7. QA multistep energy profile ends with the products 40 kJ below the reactants. What is the overall reaction?

6.3 Heat transfer and thermal equilibrium

Learn the topic · Practice this topic
  1. QTwo metal blocks of equal mass are both at 100 °C. Metal A has a specific heat of 0.90 J/g·°C and metal B has 0.45 J/g·°C. Each is dropped into an identical cup of cool water. Which cup ends up warmer?
  2. QA hot piece of metal is placed in cool water in an insulated cup. What is true once thermal equilibrium is reached?
  3. QA small piece of hot aluminum is dropped into cold water in an insulated cup. After a few minutes the aluminum and the water have the same temperature. Which statement best explains this?
  4. QA student records the following data. A: Temperature (°C) = 12; Mass (g) = 5; Phase = liquid B: Temperature (°C) = 60; Mass (g) = 15; Phase = gas C: Temperature (°C) = 25; Mass (g) = 20; Phase = solid Which statement is correct?
  5. QA solid metal block is placed in a beaker of water that starts at 25.0 °C. The water temperature is recorded. Time (s): 0, 15, 30, 45, 60 Water temperature (°C): 25.0, 26.0, 27.1, 27.9, 28.4 Which conclusion is best supported by the data?
  6. QThree objects A, B and C, each at a different temperature, are placed in contact inside an insulated box and left for a long time. What happens?
  7. QHot copper is placed in cool water, and both reach the same temperature. How was energy transferred?
  8. QHow can you tell that two objects in contact have reached thermal equilibrium?
  9. QAn ice cube is placed in warm lemonade. In which direction does energy flow?
  10. Q3.0 L of water at 20 °C is mixed with 1.0 L of water at 60 °C. What is the final temperature?
  11. QA 5 g piece of metal at 80 °C is placed in 50 g of water at 20 °C. Which statement is correct?
  12. QWhich sample has the highest average kinetic energy: A (liquid, 15 °C), B (gas, 70 °C) or C (solid, 30 °C)?
  13. QA metal is added to water at 20.0 °C. The readings are 21.5, 23.0, 23.8 and 24.1 °C at 15-second intervals. What is the best conclusion?
  14. QFour objects at different temperatures are placed in contact and isolated. What eventually happens?

6.4 Heat capacity and calorimetry

Learn the topic · Practice this topic
  1. QHow much heat is needed to warm 50.0 g of water from 20.0 °C to 45.0 °C? (c = 4.18 J/g·°C)
  2. Q50.0 mL of 1.00 M HCl is mixed with 50.0 mL of 1.00 M NaOH in a calorimeter and the temperature rises by 6.70 °C. Taking the solution as 100. g with c = 4.18 J/g·°C, what is ΔH\Delta H per mole of water formed?
  3. QEqual masses of four metals are heated to 85 °C and each is placed in a separate 100. mL sample of water at 20 °C. Which metal gives the lowest final water temperature?
  4. QA 15.0 g sample of copper (c = 0.385 J/(g·°C)) at 25.0 °C absorbs 100. J of heat. What is its final temperature?
  5. QFour identical cups of coffee at 95 °C are each stirred with a different spoon that starts at 20 °C. Assume no heat is lost to the surroundings. A: Spoon = Aluminum; Mass of spoon (g) = 15.0; Specific heat (J/(g·°C)) = 0.90 B: Spoon = Glass; Mass of spoon (g) = 20.0; Specific heat (J/(g·°C)) = 0.84 C: Spoon = Steel; Mass of spoon (g) = 25.0; Specific heat (J/(g·°C)) = 0.50 D: Spoon = Silver; Mass of spoon (g) = 60.0; Specific heat (J/(g·°C)) = 0.24 In which cup is the final coffee temperature highest?
  6. Q20.0 g of NaOH (ΔH_soln = −45 kJ/mol) is dissolved in 500. g of water at 25.0 °C. Assume the solution has c = 4.18 J/(g·°C). What is the approximate final temperature?
  7. QA 50.0 cm³ block of metal (c = 0.500 J/(g·°C)) absorbs 1.80 × 10³ J as its temperature rises from 20.0 °C to 29.0 °C. What is the density of the metal?
  8. QEqual masses of three metals receive heat at the same steady rate. After 100 J has been added, metal A has warmed by 20 °C, metal B by 10 °C and metal C by 5 °C. Which ranking of specific heat is correct?
  9. QIn a coffee-cup calorimetry experiment the student forgets to put the lid on the cup during an exothermic reaction. How does this affect the calculated ΔH?
  10. QHow much heat is needed to raise the temperature of 10.0 mL of liquid bromine (density 3.12 g/mL, c = 0.226 J/(g·°C)) from 25.00 °C to 27.30 °C?
  11. QEqual masses of four metals at 90 °C are each placed in identical cups of cool water. Which metal raises the water to the highest final temperature?
  12. QWhich causes the largest increase in a system's internal energy?
  13. QA system's internal energy increases by 2.0 kJ while it absorbs 5.0 kJ of heat. What work is involved?
  14. QEqual masses of metals with specific heats of cc, 2c2c and 3c3c absorb the same amount of heat. Which has the largest temperature rise?
  15. QA 25.0 g piece of Al (c=0.900c = 0.900 J/(g·°C)) at 20.0 °C absorbs 450 J. What is its final temperature?
  16. QHow could a student identify an unknown metal using only basic lab equipment?
  17. QEqual masses of metals A, B and C absorb the same heat. Their temperatures rise by 30, 15 and 10 °C. Rank their specific heats.
  18. Q8.0 g of NHX4NOX3\ce{NH4NO3} (ΔHsoln=+25.7\Delta H_\text{soln} = +25.7 kJ/mol) dissolves in 100.0 g of water at 25.0 °C. What is the final temperature? (Use c=4.18c = 4.18 J/(g·°C) for the 108 g of solution.)
  19. QA 20.0 cm³ metal block (c=0.385c = 0.385 J/(g·°C)) absorbs 693 J and warms by 10.0 °C. What is its density?
  20. QEqual masses of sand (c=830c = 830 J/(kg·K)) and water (c=4180c = 4180 J/(kg·K)) sit in the sun for the same time. Which becomes hotter?

6.5 Energy of phase changes

Learn the topic · Practice this topic
  1. QIce at 0 °C is heated at a steady rate. Why does its temperature stay at 0 °C until it has all melted?
  2. QHow much heat is needed to melt 36.0 g of ice at 0 °C? (ΔHfus=6.01 kJ/mol\Delta H_{\text{fus}} = 6.01\ \mathrm{kJ/mol}; molar mass of water = 18.0 g/mol)
  3. QThe molar heat of fusion of NaCl is 28 kJ/mol. Which statement is correct?
  4. QCalcium has ΔH_vap = 154 kJ/mol. While liquid calcium is boiling at constant pressure, which is true?
  5. QA pure solid is heated at a steady rate at 1 atm. The data are shown. Time interval (min): 0–4, 4–9, 9–14, 14–30, 30–33 Temperature (°C): −20 → 5, 5 (constant), 5 → 80, 80 (constant), 80 → 95 Which statement is correct?
  6. QΔH_vap of water is 40.7 kJ/mol. What is q when 9.0 g of steam condenses to liquid water at 100 °C?
  7. QWhich is the best explanation for why the molar heat of vaporization of a substance is larger than its molar heat of fusion?
  8. QHow much energy is released when 25.0 g of ethanol vapor (molar mass 46.07 g/mol, ΔH_vap = 38.6 kJ/mol) condenses at its boiling point?
  9. QThe molar enthalpy of vaporization of ethanol is 38.6 kJ/mol. What does this mean?
  10. QWhere does the energy go while water boils at constant temperature?
  11. QAs liquid water freezes at 0 °C:
  12. QA solid is heated steadily. Its temperature rises from 0 to 4 s, stays constant from 4 to 8 s, then rises again. What happens between 4 and 8 s?
  13. QWater vapor condenses at constant pressure. Which description is correct?
  14. QΔHfus\Delta H_\text{fus} of water is 6.01 kJ/mol. How much energy is needed to melt 36.0 g of ice?
  15. QΔHvap\Delta H_\text{vap} of water is 40.7 kJ/mol. What is the enthalpy change when 27.0 g of steam condenses?
  16. QWhy is ΔHvap\Delta H_\text{vap} larger than ΔHfus\Delta H_\text{fus} for most substances?

6.6 Introduction to enthalpy of reaction

Learn the topic · Practice this topic
  1. QC₃H₈(g) + 5 O₂(g) → 3 CO₂(g) + 4 H₂O(l), ΔH° = −2220 kJ/molᵣₓₙ. About how much energy is released when 44 g of propane burns completely?
  2. Q2 Na₂O₂(s) + 2 H₂O(l) → 4 NaOH(s) + O₂(g), ΔH° = −126 kJ/molᵣₓₙ. How much heat is released when 2.00 mol of NaOH forms?
  3. Q2 S(s) + 3 O₂(g) → 2 SO₃(g), ΔH° = −790 kJ/molᵣₓₙ. What is ΔH when 0.95 g of sulfur reacts?
  4. QCH₄(g) + 3 Cl₂(g) → CHCl₃(l) + 3 HCl(g), ΔH° = −336 kJ/molᵣₓₙ. How much heat is released when 23.0 g of HCl forms?
  5. QA solid B dissolves in water and the temperature of the solution slowly decreases. Which statement is correct?
  6. QFor N₂(g) + 3 H₂(g) → 2 NH₃(g), ΔH° = −92 kJ/molᵣₓₙ. What is ΔH° for NH₃(g) → ½ N₂(g) + 3/2 H₂(g)?
  7. QThe combustion of CHX4\ce{CH4} has ΔH=−890\Delta H = -890 kJ/mol. How much heat is released when 32.0 g of CHX4\ce{CH4} burns?
  8. QKNOX3\ce{KNO3} dissolves in water, and the temperature drops. Which is correct?
  9. QWhat is the sign of ΔH\Delta H for breaking the bond in ClX2⟶2 Cl\ce{Cl2} \longrightarrow \ce{2Cl}?
  10. QEthanol burns in oxygen. Which describes this reaction?

6.7 Bond enthalpies

Learn the topic · Practice this topic
  1. QUsing bond enthalpies of 436 kJ/mol for H–H, 243 kJ/mol for Cl–Cl and 431 kJ/mol for H–Cl, estimate ΔH\Delta H for HX2+ClX2⟶2 HCl\ce{H2} + \ce{Cl2} \longrightarrow \ce{2HCl}.
  2. QUsing bond enthalpies H–H 436, Cl–Cl 242 and H–Cl 431 kJ/mol, estimate ΔH\Delta H for HX2+ClX2⟶2 HCl\ce{H2} + \ce{Cl2} \longrightarrow \ce{2HCl}.
  3. QWhich statement about the reaction AB(g) → A(g) + B(g) is correct?
  4. QUsing average bond enthalpies H–H 436, F–F 155 and H–F 567 kJ/mol, estimate ΔH for H₂(g) + F₂(g) → 2 HF(g).
  5. QUsing average bond enthalpies N≡N 941, H–H 436 and N–H 391 kJ/mol, estimate ΔH for N₂(g) + 3 H₂(g) → 2 NH₃(g).
  6. QHydrogen cyanide can rearrange to hydrogen isocyanide: H–C≡N(g) → H–N≡C(g). Average bond enthalpies: C–H 413 and N–H 391 kJ/mol; treat the C≡N triple bond as the same on both sides. Estimate ΔH.
  7. QWhy does ΔH calculated from average bond enthalpies usually differ slightly from ΔH calculated from standard enthalpies of formation?
  8. QWhich list is in order of increasing bond enthalpy?

6.8 Enthalpy of formation

Learn the topic · Practice this topic
  1. QGiven ΔHf∘\Delta H^\circ_f values of −393.5 kJ/mol for COX2(g)\ce{CO2(g)}, −285.8 kJ/mol for HX2O(l)\ce{H2O(l)} and −74.8 kJ/mol for CHX4(g)\ce{CH4(g)}, what is ΔH∘\Delta H^\circ for CHX4(g)+2 OX2(g)⟶COX2(g)+2 HX2O(l)\ce{CH4(g)} + \ce{2O2(g)} \longrightarrow \ce{CO2(g)} + \ce{2H2O(l)}?
  2. QUsing ΔHf∘\Delta H^\circ_f values AgNOX3(aq)\ce{AgNO3(aq)} −101, NO(g)\ce{NO(g)} +90, HX2O(l)\ce{H2O(l)} −286 and HNOX3(aq)\ce{HNO3(aq)} −207 kJ/mol, what is ΔH∘\Delta H^\circ for 3 Ag(s)+4 HNOX3(aq)⟶3 AgNOX3(aq)+NO(g)+2 HX2O(l)\ce{3Ag(s)} + \ce{4HNO3(aq)} \longrightarrow \ce{3AgNO3(aq)} + \ce{NO(g)} + \ce{2H2O(l)}?
  3. QWhich equation represents the standard enthalpy of formation of liquid water?
  4. QWhich substance has ΔH°f = 0 at 25 °C?
  5. QWhat is ΔH° for 3 C₂H₂(g) → C₆H₆(l)? (ΔH°f of C₂H₂(g) = +227 kJ/mol; C₆H₆(l) = +49 kJ/mol.)
  6. QUsing the data, find ΔH° for Ca(OH)₂ + 2 H₃AsO₄ → Ca(H₂AsO₄)₂ + 2 H₂O. Ca(OH)₂: ΔH°f (kJ/mol) = −986.6 H₃AsO₄: ΔH°f (kJ/mol) = −900.4 Ca(H₂AsO₄)₂: ΔH°f (kJ/mol) = −2346.0 H₂O: ΔH°f (kJ/mol) = −285.9
  7. QA student wants ΔH° for IF₇(g) + I₂(g) → IF₅(g) + 2 IF(g) and has ΔH°f values for IF(g), IF₅(g) and IF₇(g) only. What else is needed?
  8. QFor 4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s), ΔH° = −3351 kJ/molᵣₓₙ. What is ΔH°f of Al₂O₃(s)?
  9. QUsing ΔH°f values of CaCO₃(s) −1206.9, CaO(s) −635.1 and CO₂(g) −393.5 kJ/mol, calculate ΔH° for CaCO₃(s) → CaO(s) + CO₂(g).
  1. QGiven A → B with ΔH=+40 kJ\Delta H = +40\ \mathrm{kJ}, and C → B with ΔH=−25 kJ\Delta H = -25\ \mathrm{kJ}, what is ΔH\Delta H for A → C?
  2. QC+OX2⟶COX2\ce{C} + \ce{O2} \longrightarrow \ce{CO2}, ΔH=−393.5 kJ\Delta H = -393.5\ \mathrm{kJ}; CO+12 OX2⟶COX2\ce{CO} + \ce{1/2O2} \longrightarrow \ce{CO2}, ΔH=−283.0 kJ\Delta H = -283.0\ \mathrm{kJ}. What is ΔH\Delta H for C+12 OX2⟶CO\ce{C} + \ce{1/2O2} \longrightarrow \ce{CO}?
  3. QGiven N₂(g) + 2 O₂(g) → 2 NO₂(g), ΔH = +66.4 kJ and 2 NO(g) + O₂(g) → 2 NO₂(g), ΔH = −114.2 kJ, what is ΔH for N₂(g) + O₂(g) → 2 NO(g)?
  4. QGiven 2 S(s) + 3 O₂(g) → 2 SO₃(g), ΔH = −790 kJ and S(s) + O₂(g) → SO₂(g), ΔH = −297 kJ, what is ΔH for 2 SO₂(g) + O₂(g) → 2 SO₃(g)?
  5. QFor CH₄(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(g), ΔH = −802 kJ. For H₂O(g) → H₂O(l), ΔH = −44 kJ/mol. What is ΔH if the water is produced as liquid?
  6. QUsing these combustion data, find ΔH for C(s, graphite) + 2 H₂(g) → CH₄(g). Equation 1: C(s) + O₂(g) → CO₂(g) ΔH = −393.5 kJ Equation 2: H₂(g) + ½ O₂(g) → H₂O(l) ΔH = −285.8 kJ Equation 3: CH₄(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(l) ΔH = −890.3 kJ
  7. QFor 2 H₂(g) + O₂(g) → 2 H₂O, how does the magnitude of ΔH when liquid water forms compare with the magnitude when water vapor forms?
  8. QAn exothermic reaction is carried out in a sealed flask. Right after the reaction, the flask feels hot. Which statement is correct?

Other questions

  1. QSolid potassium nitrate, KNO₃, is added to water at 25 °C. It dissolves and the temperature of the solution decreases. Which statement is correct?
  2. QWhen solid barium hydroxide octahydrate and solid ammonium chloride are mixed in a flask, the flask becomes cold enough to freeze water on its outside and ammonia gas is produced. What is the sign of ΔH, and what happens to the energy of the reacting system?
  3. QUsing ΔH°f values NH₃(g) −46.1, NO(g) +90.3 and H₂O(g) −241.8 kJ/mol, what is ΔH° for 4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(g)?
  4. Q0.243 g of Mg reacts completely with excess HCl(aq) in a coffee-cup calorimeter that contains 100. g of solution. The temperature rises by 11.0 °C. Assume c = 4.18 J/(g·°C). What is ΔH for Mg(s) + 2 H⁺(aq) → Mg²⁺(aq) + H₂(g)?
  5. QUsing average bond enthalpies H–H 436, Br–Br 193 and H–Br 366 kJ/mol, estimate ΔH for H₂(g) + Br₂(g) → 2 HBr(g).
  6. QA pure substance is heated at a constant rate from solid to gas. On the heating curve, which segment is the longest?
  7. QThe specific heat of aluminum is 0.897 J/(g·°C). What is its molar heat capacity? (Molar mass 26.98 g/mol.)
  8. QFor A → B, ΔH = ΔH₁, and for B → C, ΔH = ΔH₂. What is ΔH for C → A?
  9. Q100.0 g of water at 80.0 °C is mixed with 50.0 g of water at 20.0 °C in an insulated container. What is the final temperature?
  10. QThe same reaction is run with and without a catalyst. Which quantity is the same in both cases?
  11. QWhich sample needs the most energy to raise its temperature by 1.0 °C?
  12. QWhich process has a positive ΔH?
  13. QFor 2 H₂(g) + O₂(g) → 2 H₂O(l), ΔH° = −571.6 kJ/molᵣₓₙ. How much heat is released when 1.00 g of H₂ burns in excess O₂?
  14. QThe standard enthalpy of formation of carbon monoxide is the ΔH for which reaction?
  15. QAn endothermic reaction is carried out in a beaker on the bench. Right after the reaction, the products are colder than the room. Which statement describes what happens next?
  16. QFor water, ΔH_fus = 6.0 kJ/mol and ΔH_vap = 45.0 kJ/mol at 0 °C. What is ΔH for H₂O(s) → H₂O(g) at 0 °C?
  17. QWhich statement about a bomb calorimeter is correct?
  18. QThe same amount of energy is added to 50.0 g of water and to 100.0 g of water, both starting at 20.0 °C. The 50.0 g sample warms by 8.0 °C. By how much does the 100.0 g sample warm?
Chat on WhatsApp