Unit 9 study guide: Thermodynamics and Electrochemistry
Unit 9 asks one big question: will a chemical or physical change happen on its own, and if not, how can we make it happen? You will learn to describe entropy (S), the dispersal of matter and energy, and combine it with enthalpy (H) from Unit 6 to get Gibbs free energy (G), the quantity that decides thermodynamic favorability. You will then link ΔG° to the equilibrium constant K from Unit 7, see why some favored reactions never seem to happen (kinetic control, from Unit 5), and learn how unfavorable reactions can be driven by coupling them to favorable ones. The second half of the unit applies all of this to electrochemistry: galvanic (voltaic) cells that produce electricity from favored redox reactions, electrolytic cells that use electricity to force unfavored reactions, the link ΔG° = −nFE°, how concentration changes the cell potential, and Faraday's law for electrolysis calculations. The CED gives Unit 9 an exam weighting of 7–9% (about 10–13 class periods). The ten CED topics are 9.1 Introduction to Entropy, 9.2 Absolute Entropy and Entropy Change, 9.3 Gibbs Free Energy and Thermodynamic Favorability, 9.4 Thermodynamic and Kinetic Control, 9.5 Free Energy and Equilibrium, 9.6 Coupled Reactions, 9.7 Galvanic (Voltaic) and Electrolytic Cells, 9.8 Cell Potential and Free Energy, 9.9 Cell Potential Under Nonstandard Conditions, and 9.10 Electrolysis and Faraday's Law.
Constants used in this unit (as on the AP formula sheet): R = 8.314 J/(mol·K), F = 96,485 C/mol of electrons, 1 A = 1 C/s. Standard reduction potentials are taken from the usual AP table (for example Ag⁺/Ag +0.80 V, Cu²⁺/Cu +0.34 V, Zn²⁺/Zn −0.76 V) unless a question gives its own values.
Topic notes
Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.
- 9.1 Introduction to entropyNotes · free response · 16 questions
- 9.2 Absolute entropy and entropy changeNotes · free response · 12 questions
- 9.3 Gibbs free energy and thermodynamic favorabilityNotes · free response · 22 questions
- 9.4 Thermodynamic and kinetic controlNotes · free response · 10 questions
- 9.5 Free energy and equilibriumNotes · free response · 15 questions
- 9.6 Coupled reactionsNotes · free response · 10 questions
- 9.7 Galvanic (voltaic) and electrolytic cellsNotes · free response · 18 questions
- 9.8 Cell potential and free energyNotes · free response · 20 questions
- 9.9 Cell potential under nonstandard conditionsNotes · free response · 14 questions
- 9.10 Electrolysis and Faraday's lawNotes · free response · 17 questions
Exam-style free-response set
Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.
These questions are modelled on released AP Chemistry free-response questions. The concepts, structure and difficulty follow the originals, but the wording, substances and numbers are new. Long questions are worth 10 points; short questions are worth 4 points. Use R = 8.314 J/(mol·K), F = 96,485 C/mol e⁻, and R = 0.08206 L·atm/(mol·K) for gases.
FRQ A (long, 10 points). Modelled on 2014 AP FRQ Q3 and 2018 AP FRQ Q6(a)–(b).
A student is given a galvanic cell. One half-cell is a Cu electrode in 1.0 M Cu(NO₃)₂; the other is a Pb electrode in 1.0 M Pb(NO₃)₂. The electrodes are connected by a wire through a voltmeter. As current flows, the student observes that the Cu electrode gains mass and the Pb electrode loses mass.
| Half-reaction | E° (V) |
|---|---|
| Cu²⁺(aq) + 2 e⁻ → Cu(s) | +0.34 |
| Pb²⁺(aq) + 2 e⁻ → Pb(s) | ? |
(a) Identify the electrode at which oxidation occurs. Explain your reasoning using the student's observations.
(b) As the mass of the Pb electrode decreases, where does the lost mass go?
(c) When the student first set up the cell, the voltmeter read 0.00 V. Identify the missing component and explain why it is needed to obtain a nonzero voltage.
(d) After adding the missing component (which contains KNO₃(aq)), describe the movement of the ions in it as the cell operates, and state why this movement is necessary.
(e) The measured standard cell potential is +0.47 V.
(i) Calculate E° for Pb²⁺(aq) + 2 e⁻ → Pb(s).
(ii) Write the balanced net-ionic equation for the cell reaction.
(iii) Calculate ΔG° for the cell reaction, in kJ/molrxn.
(f) A second cell is made the same way, except that both solutions are 0.25 M instead of 1.0 M, with the same volumes.
(i) Is the cell potential of the second cell greater than, less than or equal to that of the standard cell? Justify your answer.
(ii) Would the second cell power a device for a longer time, a shorter time or the same time as the standard cell? Justify your answer.
Show the solution
(a) The Pb electrode (1 point). Pb loses mass, which means Pb atoms are leaving the electrode as Pb²⁺ ions: Pb(s) → Pb²⁺(aq) + 2 e⁻, which is oxidation. (Cu gains mass because Cu²⁺ is reduced to Cu.)
(b) The lead atoms become Pb²⁺(aq) ions and go into the Pb(NO₃)₂ solution (1 point).
(c) The salt bridge is missing (1 point). Without it, ions cannot flow between the two half-cells, so positive charge would build up in the Pb compartment and negative charge in the Cu compartment, stopping electron flow at once. The salt bridge completes the circuit and keeps each solution electrically neutral (1 point).
(d) NO₃⁻ ions move toward (into) the Pb half-cell, where Pb²⁺ is being produced; K⁺ ions move toward (into) the Cu half-cell, where Cu²⁺ is being removed. This keeps both solutions electrically neutral so that the reaction can continue (1 point).
(e)(i) Cu is the cathode. 0.47 = 0.34 − E°(Pb), so E°(Pb²⁺/Pb) = −0.13 V (1 point).
(e)(ii) Pb(s) + Cu²⁺(aq) → Pb²⁺(aq) + Cu(s) (1 point).
(e)(iii) n = 2. ΔG° = −nFE° = −(2)(96,485)(0.47) = −9.07 × 10⁴ J/molrxn = −91 kJ/molrxn (1 point).
(f)(i) Equal (1 point for answer with justification). Q = [Pb²⁺]/[Cu²⁺] = 0.25/0.25 = 1, the same as in the standard cell, so E = E°.
(f)(ii) A shorter time (1 point). The second cell has one quarter as many moles of Cu²⁺, so it reaches equilibrium (E = 0) after less charge has passed.
(Total 10 points.)
FRQ B (long, 10 points). Modelled on 2013 AP FRQ Q2 and the 1999 released exam multiple-choice questions 34–35.
Aluminium is produced by electrolysis of aluminium oxide dissolved in molten cryolite, using carbon anodes. The overall reaction is
2 Al₂O₃(l) + 3 C(s) → 4 Al(l) + 3 CO₂(g)
(a) Calculate the number of moles of electrons that must be transferred to produce 500. g of Al(l).
(b) A steady current of 200. A is used. Calculate the time, in hours, needed to produce the 500. g of Al.
(c) Calculate the volume of CO₂(g) produced along with 500. g of Al, measured at 305 K and 1.00 atm.
(d) Explain why the Al₂O₃ must be in the liquid state (dissolved in molten cryolite) rather than solid for the cell to operate.
(e) At 298 K, ΔG°f of Al₂O₃ is −1582.3 kJ/mol and ΔG°f of CO₂(g) is −394.4 kJ/mol. Treat Al₂O₃ as having this value in the cell.
(i) Calculate ΔG° for the overall reaction.
(ii) Calculate E° for the overall reaction (12 mol of electrons are transferred per mole of reaction as written).
(iii) Explain what your answer to (e)(ii) means for how the cell must be operated.
(f) Aluminium metal reacts with concentrated KOH(aq): 2 Al(s) + 2 OH⁻(aq) + 6 H₂O(l) → 2 [Al(OH)₄]⁻(aq) + 3 H₂(g). Use the half-reactions below to calculate E° for this reaction and decide whether it is thermodynamically favorable.
| Half-reaction | E° (V) |
|---|---|
| [Al(OH)₄]⁻(aq) + 3 e⁻ → Al(s) + 4 OH⁻(aq) | −2.35 |
| 2 H₂O(l) + 2 e⁻ → H₂(g) + 2 OH⁻(aq) | −0.83 |
Show the solution
(a) mol Al = 500. ÷ 26.98 = 18.53 mol. Each Al³⁺ needs 3 e⁻, so mol e⁻ = 3 × 18.53 = 55.6 mol (1 point).
(b) q = 55.6 × 96,485 = 5.36 × 10⁶ C. t = q/I = 5.36 × 10⁶ ÷ 200. = 2.68 × 10⁴ s = 7.45 h (1 point set-up, 1 point answer).
(c) From the equation, 4 mol Al: 3 mol CO₂, so mol CO₂ = 18.53 × 3/4 = 13.90 mol. V = nRT/P = (13.90)(0.08206)(305) ÷ 1.00 = 348 L (1 point).
(d) In a solid the Al³⁺ and O²⁻ ions are locked in the lattice and cannot move to the electrodes. In the liquid the ions are mobile, so they can carry current and reach the electrodes to be reduced or oxidized (1 point).
(e)(i) ΔG° = 3(−394.4) − 2(−1582.3) = −1183.2 + 3164.6 = +1981.4 kJ/molrxn (1 point).
(e)(ii) E° = −ΔG°/(nF) = −(1,981,400) ÷ (12 × 96,485) = −1.71 V (1 point).
(e)(iii) E° is negative (ΔG° > 0), so the reaction is not thermodynamically favored. It is an electrolytic cell: an external power supply must apply a potential greater than about 1.71 V (in practice more) to force the reaction (1 point).
(f) H₂O is reduced (cathode, −0.83 V) and Al is oxidized (anode, −2.35 V). E° = −0.83 − (−2.35) = +1.52 V. E° > 0, so ΔG° < 0 and the reaction is thermodynamically favorable (1 point for E°, 1 point for conclusion with justification).
(Total 10 points.)
FRQ C (long, 10 points). Modelled on 2019 AP FRQ Q1(f)–(h), 2016 AP FRQ Q2(d) and the 1999 released exam FRQ Q6(a).
A student dissolves ammonium nitrate in water in a coffee-cup calorimeter: NH₄NO₃(s) → NH₄⁺(aq) + NO₃⁻(aq). The solid dissolves completely and the temperature of the solution drops.
| Species | S° (J/(mol·K)) |
|---|---|
| NH₄NO₃(s) | 151.1 |
| NH₄⁺(aq) | 113.4 |
| NO₃⁻(aq) | ? |
ΔH°soln = +25.7 kJ/molrxn and ΔS°soln = +108.7 J/(molrxn·K) at 298 K.
(a) Is the dissolution endothermic or exothermic? Explain in terms of the interactions that are broken and formed.
(b) Calculate S° for NO₃⁻(aq).
(c) Using particle-level reasoning, explain why ΔS°soln is positive.
(d) Calculate ΔG°soln at 298 K.
(e) The student claims that the dissolution is driven by both enthalpy and entropy. Do you agree? Justify your answer in terms of ΔG°.
(f) Without calculating K, state whether K for the dissolution at 298 K is greater than 1 or less than 1. Justify your answer.
(g) Assuming ΔH° and ΔS° do not change with temperature, calculate the temperature below which dissolution would no longer be thermodynamically favored under standard conditions.
(h) How does ΔG°soln change if the temperature is increased? Explain.
Show the solution
(a) Endothermic (1 point). The temperature of the solution drops, so the system absorbs energy. Breaking the ionic attractions in the solid lattice and some hydrogen bonds between water molecules requires more energy than is released when the ions form ion–dipole attractions with water (1 point).
(b) 108.7 = (113.4 + S°NO₃⁻) − 151.1, so S°(NO₃⁻, aq) = 108.7 + 151.1 − 113.4 = 146.4 J/(mol·K) (1 point).
(c) In the solid, the NH₄⁺ and NO₃⁻ ions are held in fixed positions in an ordered lattice. In solution they separate and move throughout the much larger volume of the solution, so there are many more possible arrangements (microstates) (1 point).
(d) ΔG° = ΔH° − TΔS° = 25.7 − (298)(0.1087) = 25.7 − 32.4 = −6.7 kJ/molrxn (1 point).
(e) Disagree (1 point). ΔH° > 0, so the enthalpy change makes a positive (unfavorable) contribution to ΔG°. ΔG° is negative only because the −TΔS° term (−32.4 kJ) is larger in size than ΔH° (+25.7 kJ). The dissolution is driven by entropy only (1 point).
(f) K > 1 (1 point). ΔG° < 0, and since ΔG° = −RT ln K, ln K must be positive.
(g) ΔG° = 0 when T = ΔH°/ΔS° = 25,700 ÷ 108.7 = 236 K. Below about 236 K the dissolution would not be favored (1 point). (This is below the freezing point of water, so in practice ammonium nitrate is favored to dissolve at all temperatures where liquid water exists.)
(h) ΔG° becomes more negative (more favorable) (1 point). ΔS° is positive, so the −TΔS° term becomes larger in size as T increases, while ΔH° stays about constant.
(Total 10 points.)
FRQ D (short, 4 points). Modelled on 2021 AP FRQ Q2(d)–(f) and 2017 AP FRQ Q1(b).
At high temperature, germane gas decomposes: GeH₄(g) → Ge(s) + 2 H₂(g).
| Substance | S° (J/(mol·K)) |
|---|---|
| GeH₄(g) | 217.1 |
| Ge(s) | 31.1 |
| H₂(g) | 130.7 |
(a) Explain why the absolute molar entropy of Ge(s) is less than that of H₂(g).
(b) Calculate ΔS° for the reaction.
(c) ΔH° for the reaction is −90.8 kJ/molrxn, so the reaction is thermodynamically favorable at all temperatures. Explain why it is observed only at high temperatures.
(d) A catalyst is found that lets the reaction proceed at a lower temperature. What effect does the catalyst have on ΔG° for the reaction? Explain.
Show the solution
(a) Ge(s) is a solid, with atoms held in fixed positions in a lattice, while H₂ is a gas whose molecules move freely through a large volume. The gas has far more possible arrangements, so its entropy is greater (1 point).
(b) ΔS° = [31.1 + 2(130.7)] − 217.1 = 292.5 − 217.1 = +75.4 J/(molrxn·K) (1 point).
(c) The reaction has a high activation energy. At low temperature very few GeH₄ molecules have enough energy to react (and successful collisions are rare), so the rate is too slow to observe: the reaction is under kinetic control. At high temperature a much larger fraction of molecules have energy equal to or greater than Ea, so the rate becomes measurable (1 point).
(d) No effect (1 point). ΔG° depends only on the initial and final states (it is a state function); a catalyst changes only the pathway and lowers Ea.
FRQ E (short, 4 points). Modelled on 2019 AP FRQ Q2(b) and 2017 AP FRQ Q7.
A teacher wants to make I₂ and has these reagents: KI(aq), Fe(NO₃)₃(aq) and Ni(NO₃)₂(aq).
| Half-reaction | E° at 25 °C (V) |
|---|---|
| Fe³⁺(aq) + e⁻ → Fe²⁺(aq) | +0.77 |
| I₂(s) + 2 e⁻ → 2 I⁻(aq) | +0.53 |
| Ni²⁺(aq) + 2 e⁻ → Ni(s) | −0.25 |
(a) Write the balanced net-ionic equation for the thermodynamically favorable reaction that produces I₂ when two of the reagents are combined. Justify that it is favorable by calculating E°.
(b) Calculate ΔG° for the reaction in kJ/molrxn.
(c) Is K for the reaction greater than 1 or less than 1? Justify your answer.
Show the solution
(a) 2 Fe³⁺(aq) + 2 I⁻(aq) → 2 Fe²⁺(aq) + I₂(s) (1 point). E° = 0.77 − 0.53 = +0.24 V; E° > 0, so the reaction is favorable (1 point). (Ni²⁺ cannot oxidize I⁻: E° would be −0.25 − 0.53 = −0.78 V.)
(b) n = 2. ΔG° = −(2)(96,485)(0.24) = −4.6 × 10⁴ J/molrxn = −46 kJ/molrxn (1 point).
(c) K > 1 (1 point). E° > 0 means ΔG° < 0, and ΔG° = −RT ln K requires ln K > 0. (K ≈ 1 × 10⁸.)
Exam-style multiple choice
20 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.
- Q1Which reaction involves the largest decrease in entropy?
- Q2The burning of gasoline vapour in a car engine is thermodynamically favored, yet the fuel–air mixture does not react until the spark plug fires. What is the role of the spark?
- Q3An electrolytic cell for making zirconium metal uses the half-reaction [ZrF₆]²⁻ + 4 e⁻ → Zr + 6 F⁻. Which statement about this half-reaction is correct?
- Q4A steady current of 5.0 A passes through molten MgCl₂ for 20. minutes. Which expression gives the mass of Mg produced (molar mass of Mg = 24.3 g/mol; F = 96,485 C/mol e⁻)?
- Q5In the electroplating of copper, 0.300 mol of electrons passes through a solution of CuSO₄. What mass of copper is deposited?
- Q6Half-reactions: Cu²⁺ + 2 e⁻ → Cu, E° = +0.34 V; Al³⁺ + 3 e⁻ → Al, E° = −1.66 V. What is E° for a standard galvanic cell made from these two half-cells?
- Q7A galvanic cell has a Pb electrode in 1.0 M Pb(NO₃)₂ and a Pt electrode in a solution that is 1.0 M in both Fe³⁺ and Fe²⁺. E°(Fe³⁺/Fe²⁺) = +0.77 V; E°(Pb²⁺/Pb) = −0.13 V. Which describes what happens to the electrode masses as the cell operates?
- Q8For a process with ΔH° > 0 and ΔS° > 0, which statement is correct?
- Q9For CO₂(g) + 2 NH₃(g) → CO(NH₂)₂(s) + H₂O(l), ΔH° = −134 kJ/mol_rxn and the reaction is thermodynamically favored at 298 K. Which factor drives the reaction?
- Q10At 298 K, a reaction has ΔG° = +2 kJ/mol_rxn. Which is the best estimate of K?
- Q11Reaction 1 has ΔG° = +20 kJ/mol_rxn. Reaction 2 has ΔG° = −45 kJ/mol_rxn. They share a common intermediate and add to give the overall reaction. Which is correct for the overall reaction?
- Q12A zinc–air cell runs on 2 Zn(s) + O₂(g) → 2 ZnO(s). The cell is taken to the top of a high mountain, where the partial pressure of O₂ is lower. How does the cell potential compare with its value at sea level?
- Q13Lightweight batteries need anodes that release many electrons per gram. If each 1.0 g anode is completely oxidized (Na → Na⁺, Ca → Ca²⁺, Zn → Zn²⁺, Al → Al³⁺), which releases the most electrons?
- Q14A fresh zinc–air cell (2 Zn(s) + O₂(g) → 2 ZnO(s)) is weighed, used for a week in a hearing aid, and weighed again. How has its mass changed?
- Q15For the cell Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s), which change increases the cell potential?
- Q16Aqueous CuBr₂ is electrolysed with inert electrodes. E° values: Cu²⁺/Cu +0.34 V; H₂O/H₂ −0.83 V; Br₂/Br⁻ +1.07 V; O₂/H₂O +1.23 V. What forms at each electrode?
- Q17Diamond is thermodynamically unstable relative to graphite at 298 K and 1 atm, yet diamonds remain unchanged for millions of years. Which is the best explanation?
- Q18In an operating Sn/Cu galvanic cell with a KNO₃ salt bridge, Sn is oxidized. Which particle-level description of the salt bridge is correct?
- Q19A cell reaction transfers 2 mol of electrons per mole of reaction and has E° = +0.50 V. What is ΔG°?
- Q20For which process is ΔS° closest to zero?
Unit 9 worksheet
Work these on paper. Show all set-ups and units. Use R = 8.314 J/(mol·K), F = 96,485 C/mol e⁻, R = 0.08206 L·atm/(mol·K), and the table of standard reduction potentials in Topic 9.8.
-
Predict the sign of ΔS for each process and give a one-line justification. (a) 2 KClO₃(s) → 2 KCl(s) + 3 O₂(g) (b) CO₂(g) → CO₂(aq) (c) Br₂(l) → Br₂(g) (d) 2 NO(g) + O₂(g) → 2 NO₂(g) (e) Ag⁺(aq) + Cl⁻(aq) → AgCl(s)
-
Rank in order of increasing standard molar entropy at 298 K, and explain your ranking: Cl₂(g), I₂(s), F₂(g), Br₂(l).
-
A particulate diagram shows Box A containing 6 diatomic X₂ molecules. Box B, of the same volume and at the same temperature, contains the 12 separate X atoms formed when all the X₂ molecules dissociate. (a) Which box has the greater entropy? Explain. (b) What is the sign of ΔS for X₂(g) → 2 X(g)?
-
Describe how the Maxwell–Boltzmann distribution of molecular speeds for a gas changes when its temperature is raised from 300 K to 600 K, and use this to explain why the entropy of the gas increases.
-
Calculate ΔS° for 4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(g). S° (J/(mol·K)): NH₃(g) 192.5; O₂(g) 205.1; NO(g) 210.8; H₂O(g) 188.8. Is the sign what you would predict? Explain.
-
For 2 H₂(g) + O₂(g) → 2 H₂O(l), ΔS° = −326.6 J/(molrxn·K). S° of H₂(g) is 130.7 and of O₂(g) is 205.1 J/(mol·K). Calculate S° of H₂O(l).
-
Calculate ΔG° at 298 K for 2 CO(g) + O₂(g) → 2 CO₂(g). ΔG°f (kJ/mol): CO(g) −137.2; CO₂(g) −394.4.
-
For 2 HgO(s) → 2 Hg(l) + O₂(g), ΔH° = +181.6 kJ/molrxn. S° (J/(mol·K)): HgO(s) 70.3; Hg(l) 76.0; O₂(g) 205.1. (a) Calculate ΔS°. (b) Calculate ΔG° at 298 K. (c) Find the temperature above which the decomposition is thermodynamically favored.
-
Complete the table by stating whether each reaction is favored at all T, no T, high T only or low T only, and what drives it when it is favored.
| Reaction | ΔH° | ΔS° |
|---|---|---|
| W | − | + |
| X | + | + |
| Y | − | − |
| Z | + | − |
- A student measures ΔG° for a reaction at three temperatures (assume ΔH° and ΔS° are constant).
| T (K) | ΔG° (kJ/molrxn) |
|---|---|
| 300 | +12.0 |
| 400 | +2.0 |
| 500 | −8.0 |
(a) If ΔG° were plotted against T, what would the slope and y-intercept represent? (b) Determine ΔS° and ΔH°. (c) At what temperature is K = 1?
-
When anhydrous CaCl₂ dissolves in water, the solution becomes hot. ΔS° for the dissolution is negative. Is the dissolution driven by enthalpy only, entropy only, or both? Justify in terms of ΔG°.
-
A mixture of sucrose and O₂ at room temperature shows no sign of reaction, although C₁₂H₂₂O₁₁(s) + 12 O₂(g) → 12 CO₂(g) + 11 H₂O(l) has ΔG° = −5796 kJ/molrxn. A student concludes that the mixture is at equilibrium. Explain why the student is wrong and give the correct explanation.
-
ΔG° = +10.0 kJ/molrxn for a reaction at 298 K. Calculate K.
-
K = 4.5 × 10³ for a gas-phase reaction at 500. K. Calculate ΔG° in kJ/molrxn.
-
Without a calculator, sort these reactions at 298 K into "K ≫ 1", "K ≈ 1" and "K ≪ 1": (a) ΔG° = −85 kJ/molrxn (b) ΔG° = +0.8 kJ/molrxn (c) ΔG° = +62 kJ/molrxn (d) ΔG° = −1.0 kJ/molrxn.
-
ZnO(s) → Zn(s) + 1/2 O₂(g) has ΔG° = +318.3 kJ/molrxn. C(s) + 1/2 O₂(g) → CO(g) has ΔG° = −137.2 kJ/molrxn at 298 K. (a) Write the coupled reaction and calculate ΔG°. (b) Is coupling enough to make zinc from ZnO at 298 K? (c) Suggest how zinc smelters make the process work, given that ΔS° for the coupled reaction is large and positive.
-
A galvanic cell has a Mg strip in 1.0 M Mg(NO₃)₂ and an Fe strip in 1.0 M Fe(NO₃)₂, with a KNO₃ salt bridge. (a) Identify the anode and cathode. (b) Write the half-reactions and the overall equation. (c) Describe the direction of electron flow and of K⁺ and NO₃⁻ in the salt bridge. (d) State how the mass of each strip changes. (e) Calculate E°cell.
-
Calculate E° and ΔG° (in kJ/molrxn) for 2 Al(s) + 3 Cu²⁺(aq) → 2 Al³⁺(aq) + 3 Cu(s).
-
(a) Can Br₂(aq) oxidize Cl⁻(aq) to Cl₂ under standard conditions? (b) Can Cl₂(aq) oxidize Br⁻(aq) to Br₂? Justify each with a value of E°.
-
A galvanic cell is built from a Cu/Cu²⁺ half-cell and an unknown metal M in 1.0 M M²⁺. The measured E°cell is 0.74 V, and the Cu electrode gains mass. Calculate E° for M²⁺ + 2 e⁻ → M.
-
A redox reaction with n = 2 has E° = +0.10 V at 298 K. Calculate K.
-
A galvanic cell runs on Ni(s) + 2 Ag⁺(aq) → Ni²⁺(aq) + 2 Ag(s). Predict whether each change increases, decreases or does not change the cell potential, and justify: (a) NaCl(s) is added to the Ag half-cell, precipitating some AgCl(s); (b) more Ni(NO₃)₂(s) is dissolved in the Ni half-cell; (c) the Ni electrode is replaced by one twice as large.
-
A concentration cell has Zn electrodes in 0.050 M Zn²⁺ (half-cell P) and 1.5 M Zn²⁺ (half-cell Q). (a) Which half-cell is the anode? (b) In which direction do electrons flow in the wire? (c) What happens to the cell potential over time, and why?
-
The table shows measured cell potentials at 298 K for Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s) with [Zn²⁺] fixed at 1.0 M.
| [Cu²⁺] (M) | E (V) |
|---|---|
| 1.0 | 1.10 |
| 0.10 | 1.07 |
| 0.010 | 1.04 |
| 0.0010 | 1.01 |
(a) Describe the trend. (b) Explain it using Q. (c) Predict E when [Cu²⁺] = 1.0 × 10⁻⁴ M.
-
What mass of silver is plated onto a cathode by a current of 1.50 A flowing for 45.0 min through AgNO₃(aq)?
-
How long, in minutes, must a current of 15.0 A flow through molten NaCl to produce 10.0 L of Cl₂(g) measured at 298 K and 1.00 atm?
-
A current of 0.750 A flowing for 25.0 min through a solution of a gold salt deposits 0.7655 g of Au. Determine the charge on the gold ion.
-
Two electrolytic cells are connected in series. One contains AgNO₃(aq) and the other Cu(NO₃)₂(aq). When 2.16 g of Ag has been deposited in the first cell, what mass of Cu has been deposited in the second?
-
Aqueous KBr is electrolysed with inert electrodes. (a) Identify the products at the cathode and at the anode. (b) Calculate the minimum voltage needed under standard conditions. Use E° values: K⁺/K −2.92 V; H₂O/H₂ −0.83 V; Br₂/Br⁻ +1.07 V; O₂/H₂O +1.23 V.
-
Explain the difference between a galvanic cell and an electrolytic cell in terms of (a) the sign of ΔG°, (b) the sign of E°cell, (c) the energy conversion, and (d) the reaction at the anode.
Show the answer key
-
(a) + (0 → 3 mol gas). (b) − (gas becomes confined in solution). (c) + (liquid → gas). (d) − (3 mol → 2 mol gas). (e) − (dispersed aqueous ions form an ordered solid).
-
I₂(s) < Br₂(l) < F₂(g) < Cl₂(g). Solid < liquid < gas; of the two gases, Cl₂ has the greater molar mass and more electrons, so it has more accessible energy states. (Approximate S°: 116, 152, 203, 223 J/(mol·K).)
-
(a) Box B. It has twice as many independent gas particles in the same volume, so there are many more possible arrangements. (b) Positive.
-
At 600 K the curve is lower, broader and shifted to higher speeds; the kinetic energies are spread over a wider range. More ways to distribute the energy among the molecules (more microstates) means higher entropy.
-
ΔS° = [4(210.8) + 6(188.8)] − [4(192.5) + 5(205.1)] = 1976.0 − 1795.5 = +180.5 J/(molrxn·K). Yes: 9 mol gas → 10 mol gas, so a positive value is expected.
-
−326.6 = 2S°(H₂O) − [2(130.7) + 205.1], so 2S°(H₂O) = −326.6 + 466.5 = 139.9; S°(H₂O, l) = 70.0 J/(mol·K).
-
ΔG° = 2(−394.4) − 2(−137.2) = −788.8 + 274.4 = −514.4 kJ/molrxn (O₂ has ΔG°f = 0).
-
(a) ΔS° = [2(76.0) + 205.1] − 2(70.3) = 357.1 − 140.6 = +216.5 J/(molrxn·K). (b) ΔG° = 181.6 − 298(0.2165) = +117.1 kJ/molrxn. (c) T = 181,600 ÷ 216.5 = 839 K.
-
W: all T, driven by both. X: high T only, driven by entropy. Y: low T only, driven by enthalpy. Z: no T (never favored).
-
(a) Since ΔG° = ΔH° − TΔS°, the slope is −ΔS° and the y-intercept is ΔH°. (b) Slope = (−8.0 − 12.0) ÷ (500 − 300) = −0.100 kJ/K, so ΔS° = +0.100 kJ/(molrxn·K) = +100 J/(molrxn·K). ΔH° = 12.0 + 300(0.100) = +42.0 kJ/molrxn. (c) K = 1 when ΔG° = 0: T = 42,000 ÷ 100 = 420 K (consistent with the table).
-
Enthalpy only. The solution gets hot, so ΔH° < 0. ΔS° < 0 makes −TΔS° positive (unfavorable). The dissolution occurs, so ΔG° < 0, which is possible only because the negative ΔH° outweighs the positive −TΔS° term.
-
A system at equilibrium has Q = K. Here K is enormous (ΔG° is hugely negative), and almost no product is present, so the system is very far from equilibrium. The reaction does not proceed because its activation energy is high, so at room temperature very few collisions are energetic enough: it is under kinetic control.
-
K = e^(−10,000/(8.314 × 298)) = e^(−4.04) = 0.018.
-
ΔG° = −(8.314)(500.)(ln 4500) = −(4157)(8.41) = −3.50 × 10⁴ J = −35.0 kJ/molrxn.
-
K ≫ 1: (a). K ≈ 1: (b) and (d) (|ΔG°| < RT ≈ 2.5 kJ/mol). K ≪ 1: (c).
-
(a) ZnO(s) + C(s) → Zn(s) + CO(g). ΔG° = 318.3 − 137.2 = +181.1 kJ/molrxn. (b) No; ΔG° is still positive at 298 K. (c) The coupled reaction makes 1 mol of gas from solids, so ΔS° > 0. At a high enough temperature the −TΔS° term makes ΔG° negative, so smelters run the reaction at very high temperatures (and zinc vapour is removed as it forms).
-
(a) Mg is the anode (more negative E°, −2.37 V); Fe is the cathode (−0.44 V). (b) Anode: Mg → Mg²⁺ + 2 e⁻. Cathode: Fe²⁺ + 2 e⁻ → Fe. Overall: Mg(s) + Fe²⁺(aq) → Mg²⁺(aq) + Fe(s). (c) Electrons flow through the wire from Mg to Fe. NO₃⁻ moves toward the Mg half-cell; K⁺ moves toward the Fe half-cell. (d) The Mg strip loses mass; the Fe strip gains mass. (e) E° = −0.44 − (−2.37) = +1.93 V.
-
E° = 0.34 − (−1.66) = +2.00 V. n = 6 (2 Al each lose 3 e⁻). ΔG° = −(6)(96,485)(2.00) = −1.16 × 10⁶ J = −1158 kJ/molrxn.
-
(a) No. Br₂ would be reduced (1.07 V) and Cl⁻ oxidized (1.36 V): E° = 1.07 − 1.36 = −0.29 V < 0. (b) Yes. E° = 1.36 − 1.07 = +0.29 V > 0.
-
Cu²⁺ is reduced, so Cu is the cathode: 0.74 = 0.34 − E°(M), so E°(M²⁺/M) = −0.40 V.
-
ln K = (2)(96,485)(0.10) ÷ [(8.314)(298)] = 7.79; K = e^7.79 = 2.4 × 10³.
-
Q = [Ni²⁺]/[Ag⁺]². (a) Decreases: [Ag⁺] falls, Q rises, so E falls. (b) Decreases: [Ni²⁺] rises, Q rises. (c) No change: electrode size does not appear in Q or E°.
-
(a) P, the dilute half-cell: Zn is oxidized there, raising [Zn²⁺] toward that of Q. (b) From P to Q. (c) It decreases toward zero as the concentrations become equal, because the system approaches equilibrium (Q → K = 1). The initial E is about 0.044 V.
-
(a) E decreases by about 0.03 V for every tenfold decrease in [Cu²⁺]. (b) Q = [Zn²⁺]/[Cu²⁺]. Lower [Cu²⁺] makes Q larger, moving the cell closer to equilibrium, so by E = E° − (RT/nF) ln Q the potential decreases. (c) About 0.98 V.
-
q = (1.50)(45.0 × 60) = 4050 C; mol e⁻ = 4050 ÷ 96,485 = 0.04198 mol = mol Ag; mass = 0.04198 × 107.87 = 4.53 g.
-
mol Cl₂ = PV/RT = (1.00)(10.0) ÷ [(0.08206)(298)] = 0.4089 mol; mol e⁻ = 0.8179 mol; q = 0.8179 × 96,485 = 7.89 × 10⁴ C; t = 7.89 × 10⁴ ÷ 15.0 = 5.26 × 10³ s = 87.7 min.
-
q = (0.750)(25.0 × 60) = 1125 C; mol e⁻ = 0.01166 mol. mol Au = 0.7655 ÷ 196.97 = 0.003886 mol. Ratio = 0.01166 ÷ 0.003886 = 3.00, so the ion is Au³⁺.
-
mol Ag = 2.16 ÷ 107.87 = 0.02002 mol = mol e⁻. mol Cu = 0.02002 ÷ 2 = 0.01001 mol; mass = 0.01001 × 63.55 = 0.636 g.
-
(a) Cathode: H₂(g) and OH⁻ (water, −0.83 V, is reduced more easily than K⁺, −2.92 V). Anode: Br₂ (Br⁻ is oxidized more easily than water, because 1.07 V < 1.23 V). (b) E° = −0.83 − 1.07 = −1.90 V, so at least 1.90 V must be applied.
-
(a) Galvanic: ΔG° < 0; electrolytic: ΔG° > 0. (b) Galvanic: E°cell > 0; electrolytic: E°cell < 0. (c) Galvanic: chemical → electrical energy; electrolytic: electrical → chemical energy. (d) In both, oxidation occurs at the anode.
Stuck on a unit? Let us fix it this week.
Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.
Book a session