AP Chemistry · Unit 7 · 7–9% of the exam

Unit 7 study guide: Equilibrium

Unit 7 is about reactions that can go both ways. You will learn what chemical equilibrium is and why it is dynamic, how to write and calculate the equilibrium constant K and the reaction quotient Q, how to use the size of K, how to combine K values, and how to find equilibrium amounts with ICE tables. You will then use Le Châtelier's principle and the comparison of Q with K to predict how a system responds to a change. The last four topics apply all of this to salts that dissolve only a little: the solubility-product constant Ksp, the common-ion effect, the effect of pH on solubility, and the free energy of dissolution. The CED gives Unit 7 an exam weighting of 7–9% of the multiple-choice section, and equilibrium reasoning also appears in Units 8 and 9 and in almost every free-response section. The unit covers CED topics 7.1 to 7.14.

Topic notes

Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.

Exam-style free-response set

Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.

These questions are written in the style of released AP free-response questions. They use new wording and new numbers or substances. Point values follow the AP scoring style: 10-point questions are "long" questions and 4-point questions are "short" questions.

FRQ 1 (10 points, long). Modelled on 2019 AP FRQ Q2(d)–(f) and 2018 AP FRQ Q2(b)–(c).

Nitrosyl bromide decomposes: 2 NOBr(g) ⇌ 2 NO(g) + Br₂(g), ΔH° = +16 kJ/molrxn.

A 0.150 mol sample of pure NOBr(g) is placed in a previously evacuated, rigid 2.50 L container at 298 K.

(a) Calculate the pressure in the container before any decomposition occurs.

(b) Write the expression for the equilibrium constant, Kc, for the decomposition.

After the system reaches equilibrium at 298 K, 34 percent of the original NOBr has decomposed.

(c) Calculate the value of Kc at 298 K.

(d) Calculate the total pressure in the container at equilibrium.

(e) A student hypothesises that raising the temperature will increase the amount of NOBr(g) in the equilibrium mixture. Do you agree or disagree? Justify your answer.

(f) At 298 K, the volume of the container is suddenly halved. Calculate Qc immediately after the change, and use it to predict the direction of net reaction.

(g) A catalyst is added to the original equilibrium mixture. What effect, if any, does this have on the amount of NO(g) at equilibrium? Explain.

Show the solution

(a) 1 point.

P=nRTV=(0.150)(0.08206)(298)2.50=1.47 atmP = \frac{nRT}{V} = \frac{(0.150)(0.08206)(298)}{2.50} = 1.47\ \text{atm}

(b) 1 point. Kc = [NO]²[Br₂] / [NOBr]².

(c) 2 points (1 for correct equilibrium concentrations, 1 for Kc). [NOBr]₀ = 0.150/2.50 = 0.0600 M. Decomposed: 0.34 × 0.0600 = 0.0204 M.

[NOBr] [NO] [Br₂]
I 0.0600 0 0
C −0.0204 +0.0204 +0.0102
E 0.0396 0.0204 0.0102

Kc=(0.0204)2(0.0102)(0.0396)2=2.7×10−3K_c = \frac{(0.0204)^2(0.0102)}{(0.0396)^2} = 2.7\times10^{-3}

(d) 1 point. Total moles of gas = 0.150 × (0.66 + 0.34 + 0.17) = 0.1755 mol. At constant T and V, P is proportional to n: P = 1.47 atm × (0.1755/0.150) = 1.72 atm.

(e) 2 points (1 for "disagree", 1 for justification). Disagree. The forward reaction is endothermic (ΔH° > 0), so raising the temperature shifts the equilibrium to the right (K increases). The amount of NOBr decreases.

(f) 2 points (1 for Q, 1 for direction). Halving the volume doubles every concentration.

Qc=(2[NO])2(2[Br2])(2[NOBr])2=2Kc=5.4×10−3Q_c = \frac{(2[NO])^2(2[Br_2])}{(2[NOBr])^2} = 2K_c = 5.4\times10^{-3}

Q > K, so the net reaction goes in reverse (toward NOBr, the side with fewer moles of gas).

(g) 1 point. No effect on the equilibrium amount. A catalyst speeds up the forward and reverse reactions equally, so equilibrium is reached sooner but the composition is the same.

Total: 10 points.

FRQ 2 (10 points, long). Modelled on 2013 AP FRQ Q1 and 2017 AP FRQ Q6.

Answer the following about the solubility of some salts at 25 °C.

(a) A student adds 0.50 g of solid SrF₂ to 100. mL of distilled water and stirs until no more dissolves. Some solid remains. Analysis shows [F⁻] = 2.0 × 10⁻³ M in the saturated solution.

(i) Write the equation for the dissolving of SrF₂(s) in water.

(ii) Calculate the number of moles of SrF₂ that dissolved.

(iii) Calculate Ksp for SrF₂.

(b) A 500. mL solution contains Ag⁺(aq) and Pb²⁺(aq), each at 0.010 M. A student adds 0.50 M NaCl(aq) one drop at a time. Ksp for AgCl is 1.8 × 10⁻¹⁰ and Ksp for PbCl₂ is 1.7 × 10⁻⁵. Assume the added volume is negligible.

(i) Which salt precipitates first? Justify your answer with calculations.

(ii) Calculate the minimum [Cl⁻] needed to start precipitation of the salt in (b)(i).

(iii) Calculate [Ag⁺] remaining in solution at the moment PbCl₂ begins to precipitate. Is this method good for separating the two ions? Explain.

(c) The student adds dilute HNO₃ to the AgCl precipitate, hoping to dissolve it. Will this work? Explain.

(d) The lattice energy of SrF₂ is smaller than the lattice energy of MgF₂. Explain why in terms of periodic properties and Coulomb's law.

Show the solution

(a)(i) 1 point. SrF₂(s) ⇌ Sr²⁺(aq) + 2 F⁻(aq).

(a)(ii) 1 point. [Sr²⁺] = ½[F⁻] = 1.0 × 10⁻³ M. Moles = (1.0 × 10⁻³ M)(0.100 L) = 1.0 × 10⁻⁴ mol.

(a)(iii) 1 point. Ksp = [Sr²⁺][F⁻]² = (1.0 × 10⁻³)(2.0 × 10⁻³)² = 4.0 × 10⁻⁹.

(b)(i) 2 points (1 for calculations, 1 for answer). [Cl⁻] needed for AgCl: 1.8 × 10⁻¹⁰ / 0.010 = 1.8 × 10⁻⁸ M. [Cl⁻] needed for PbCl₂: √(1.7 × 10⁻⁵ / 0.010) = 4.1 × 10⁻² M. AgCl needs far less Cl⁻, so AgCl precipitates first.

(b)(ii) 1 point. [Cl⁻] = 1.8 × 10⁻⁸ M.

(b)(iii) 2 points. When PbCl₂ starts to form, [Cl⁻] = 4.1 × 10⁻² M, so [Ag⁺] = 1.8 × 10⁻¹⁰ / 0.041 = 4.4 × 10⁻⁹ M. This is about 0.00004% of the original 0.010 M, so almost all the Ag⁺ has been removed before any Pb²⁺ precipitates. The separation is very good.

(c) 1 point. No. Cl⁻ is the conjugate base of a strong acid, so H⁺ does not react with it. Adding acid does not lower [Cl⁻], so the AgCl equilibrium is not shifted.

(d) 1 point. Sr²⁺ has more electron shells and is larger than Mg²⁺, while the charges are the same. By Coulomb's law the attraction between ions is weaker when the distance between their centres is larger, so less energy is needed to separate the ions in SrF₂.

Total: 10 points.

FRQ 3 (4 points, short). Modelled on 2014 AP FRQ Q4.

A metal carbonate decomposes when heated: MCO₃(s) ⇌ MO(s) + CO₂(g). A student places a 10.0 g sample of MCO₃(s) (0.0677 mol) in a rigid 1.00 L container, removes all the air, and heats the container to 1000 K. The pressure of CO₂ is recorded.

Time (min) 0 5 10 15 20 25 30
P_CO₂ (atm) 0 0.28 0.45 0.55 0.60 0.60 0.60

The experiment is repeated with a 20.0 g sample. The final pressure is again 0.60 atm.

(a) Calculate the number of moles of CO₂ in the container after 20 minutes.

(b) The student claims the pressure became constant because all the MCO₃ had decomposed. Do you agree? Explain using the data.

(c) After 30 minutes, extra CO₂ is injected, raising the pressure to 0.90 atm. Will the final pressure be greater than, less than, or equal to 0.60 atm? Explain.

(d) Are there enough data to determine Kp for the reaction at 1000 K? Justify your answer.

Show the solution

(a) 1 point.

n=PVRT=(0.60)(1.00)(0.08206)(1000)=7.3×10−3 moln = \frac{PV}{RT} = \frac{(0.60)(1.00)}{(0.08206)(1000)} = 7.3\times10^{-3}\ \text{mol}

(b) 1 point. Disagree. Only 0.0073 mol of the 0.0677 mol decomposed. Also, doubling the mass of MCO₃ did not change the final pressure; if all the solid had decomposed, twice the mass would have given twice the pressure. The constant pressure shows the system reached equilibrium.

(c) 1 point. Equal to 0.60 atm. Injecting CO₂ makes Q (= P_CO₂) greater than Kp, so CO₂ reacts with MO to form MCO₃ until P_CO₂ returns to 0.60 atm (Kp = 0.60; equilibrium constants have no units) (solids remain present, so K is unchanged at 1000 K).

(d) 1 point. Yes. Kp = P_CO₂ because the solids are not in the expression. Some solid remained and the pressure was constant, so Kp = 0.60.

Total: 4 points.

FRQ 4 (4 points, short). Modelled on 2021 AP FRQ Q6.

A student compares the electrical conductivity of saturated solutions of SrSO₄ (Ksp = 3.4 × 10⁻⁷) and BaSO₄ (Ksp = 1.1 × 10⁻¹⁰). Each beaker contains the same volume of solution and some undissolved solid.

(a) Explain why solid SrSO₄ does not conduct electricity, but its saturated solution does.

(b) Which saturated solution has the greater conductivity? Justify your answer.

(c) A particle drawing of the SrSO₄ beaker shows 6 Sr²⁺ ions and 6 SO₄²⁻ ions in solution. Describe what an equivalent drawing of the BaSO₄ beaker should show.

(d) To make more SrSO₄ dissolve, the student adds some 1 M Na₂SO₄(aq) to the SrSO₄ beaker. Instead, more white precipitate appears. Explain.

Show the solution

(a) 1 point. In the solid, ions are held in fixed positions in the lattice and cannot move, so no current flows. In solution the dissolved ions are free to move and carry charge.

(b) 1 point. SrSO₄. Both are 1: 1 salts, so the larger Ksp means more dissolved ions (s = 5.8 × 10⁻⁴ M for SrSO₄ vs 1.0 × 10⁻⁵ M for BaSO₄), and more mobile ions give higher conductivity.

(c) 1 point. Equal numbers of Ba²⁺ and SO₄²⁻ ions, but far fewer than in the SrSO₄ drawing. The solubility ratio is about 1: 56, so the drawing should show essentially no dissolved ions (at most one of each), with solid BaSO₄ at the bottom.

(d) 1 point. SO₄²⁻ is a common ion. Adding it makes Q = [Sr²⁺][SO₄²⁻] greater than Ksp, so by Le Châtelier's principle the equilibrium shifts toward solid SrSO₄, and more precipitate forms.

Total: 4 points.

FRQ 5 (4 points, short). Modelled on 2016 AP FRQ Q6.

The ion EDTA⁴⁻ forms a complex with Ca²⁺: Ca²⁺(aq) + EDTA⁴⁻(aq) ⇌ Ca(EDTA)²⁻(aq), K = 5.0 × 10¹⁰.

A 50.0 mL sample of 0.40 M EDTA⁴⁻(aq) is mixed with 50.0 mL of 0.10 M Ca(NO₃)₂(aq) to give 100.0 mL of solution.

(a) Determine [Ca(EDTA)²⁻] in the mixture. Justify your answer using the value of K.

(b) Estimate [Ca²⁺] at equilibrium.

(c) The solution is diluted with water to 1.00 L. After equilibrium is re-established, is the number of moles of Ca²⁺(aq) greater than, less than, or equal to the number before dilution? Justify your answer.

Show the solution

(a) 2 points (1 for value, 1 for justification). Moles Ca²⁺ = (0.10)(0.0500) = 0.0050 mol. Moles EDTA⁴⁻ = (0.40)(0.0500) = 0.020 mol. Because K is very large, the reaction goes essentially to completion with Ca²⁺ as the limiting reactant. Moles of complex = 0.0050 mol, so [Ca(EDTA)²⁻] = 0.0050 mol / 0.1000 L = 0.050 M.

(b) 1 point. Excess EDTA⁴⁻ = 0.015 mol / 0.1000 L = 0.15 M.

[Ca2+]=[Ca(EDTA)2−]K[EDTA4−]=0.050(5.0×1010)(0.15)=6.7×10−12 M[Ca^{2+}] = \frac{[Ca(EDTA)^{2-}]}{K[EDTA^{4-}]} = \frac{0.050}{(5.0\times10^{10})(0.15)} = 6.7\times10^{-12}\ \text{M}

(c) 1 point. Greater. Dilution by a factor of 10 makes every concentration 1/10 as large. Q = (0.1)/((0.1)(0.1)) × K = 10K. Since Q > K, the equilibrium shifts to the left, forming more free Ca²⁺ and EDTA⁴⁻ (the side with more dissolved particles).

Total: 4 points.

Exam-style multiple choice

18 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.

  1. Q1For HF(aq) + CH₃COO⁻(aq) ⇌ F⁻(aq) + CH₃COOH(aq), K = 37 at 25 °C. Which conclusion is supported?
  2. Q2For N₂(g) + 3 H₂(g) ⇌ 2 NH₃(g), ΔH° = −92 kJ/molrxn. What happens to K when the temperature is lowered?
  3. Q3Equal volumes of 0.10 M Cu(NO₃)₂ and 1.0 M NH₃ are mixed. The reaction Cu²⁺ + 4 NH₃ ⇌ [Cu(NH₃)₄]²⁺ has K = 1 × 10¹³. Which lists the equilibrium concentrations from least to greatest?
  4. Q4For 2 NO₂(g) ⇌ N₂O₄(g), K = 6.4 at a certain temperature. What is K for NO₂(g) ⇌ ½ N₂O₄(g)?
  5. Q5For 2 A(g) ⇌ B(g), pure A is placed in a rigid container at 1.00 atm. At equilibrium the total pressure is 0.70 atm. What is Kp?
  6. Q6An equilibrium mixture of N₂, H₂ and NH₃ is monitored. At time t, [H₂] suddenly jumps up. Afterwards [H₂] decreases slightly, [N₂] decreases slightly, and [NH₃] increases slightly, and then all become constant. What happened at time t?
  7. Q7Equal volumes of 0.0010 M Ca(NO₃)₂ and 0.0010 M NaF are mixed. Ksp for CaF₂ is 3.5 × 10⁻¹¹. Which is correct?
  8. Q8Which expression relates Ksp to the molar solubility s of Ca₃(PO₄)₂ in pure water?
  9. Q9Ksp values: AgCl 1.8 × 10⁻¹⁰, AgBr 5.0 × 10⁻¹³, AgI 8.5 × 10⁻¹⁷. Which ranks the molar solubilities in water from lowest to highest?
  10. Q10For a gas-phase reaction, K = 0.10 at 300 K and K = 2.5 at 400 K. Which is true?
  11. Q11A sealed container holds NH₄HS(s), NH₃(g) and H₂S(g) at equilibrium. More solid NH₄HS is added at constant temperature. What happens to P_NH₃?
  12. Q12For a reaction started with only reactants, the forward rate falls and the reverse rate rises until they become equal at time t₁. Which graph description of concentration vs time matches?
  13. Q13A 0.10 M solution of acetic acid, CH₃COOH ⇌ H⁺ + CH₃COO⁻, is diluted with water to 0.010 M. What happens to the percent ionization?
  14. Q14In which liquid is Ag₂CrO₄ (Ksp = 1.1 × 10⁻¹²) LEAST soluble?
  15. Q15A salt dissolves with ΔH°soln > 0 and ΔS°soln > 0. Which statement is true?
  16. Q16For 2 HI(g) ⇌ H₂(g) + I₂(g), Kc = 0.020. A flask starts with [HI] = 0.50 M. What is [H₂] at equilibrium?
  17. Q17For which equilibrium will decreasing the volume at constant temperature increase the amount of product?
  18. Q18Which salt is noticeably MORE soluble in 1 M HNO₃ than in pure water?

Unit 7 worksheet

Work these on paper. Show all working. Answers are in the key that follows.

  1. Explain what is meant by "dynamic equilibrium." Why are concentrations constant at equilibrium even though reactions are still happening?

  2. Write the Kc expression for each reaction: (a) 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g); (b) Ni(s) + 4 CO(g) ⇌ Ni(CO)₄(g); (c) Ca₃(PO₄)₂(s) ⇌ 3 Ca²⁺(aq) + 2 PO₄³⁻(aq); (d) HCN(aq) + H₂O(l) ⇌ H₃O⁺(aq) + CN⁻(aq).

  3. For 2 SO₂(g) + O₂(g) ⇌ 2 SO₃(g), the equilibrium partial pressures are P_SO₂ = 0.25 atm, P_O₂ = 0.40 atm and P_SO₃ = 1.5 atm. Calculate Kp.

  4. CO(g) and Cl₂(g), each at 0.500 M, are placed in a flask. At equilibrium [COCl₂] = 0.300 M for CO(g) + Cl₂(g) ⇌ COCl₂(g). Calculate Kc.

  5. Using your answer to problem 3, calculate Kp for SO₃(g) ⇌ SO₂(g) + ½ O₂(g).

  6. Given HNO₂(aq) ⇌ H⁺(aq) + NO₂⁻(aq), K₁ = 4.0 × 10⁻⁴, and NH₃(aq) + H⁺(aq) ⇌ NH₄⁺(aq), K₂ = 1.8 × 10⁹, calculate K for HNO₂(aq) + NH₃(aq) ⇌ NH₄⁺(aq) + NO₂⁻(aq). Is this reaction product-favoured?

  7. For N₂(g) + 3 H₂(g) ⇌ 2 NH₃(g), Kc = 0.50 at a certain temperature. A flask contains [N₂] = 1.0 M, [H₂] = 1.0 M and [NH₃] = 2.0 M. Calculate Qc and state which way the reaction will proceed.

  8. For A(g) + B(g) ⇌ 2 C(g), Kc = 9.0. A flask starts with [A] = [B] = 0.50 M and no C. Calculate all equilibrium concentrations.

  9. For 2 H₂O(g) ⇌ 2 H₂(g) + O₂(g), Kp = 1.0 × 10⁻¹⁸ at a certain temperature. Pure water vapour at 1.0 atm is placed in a vessel. Calculate P_O₂ and P_H₂ at equilibrium. Justify any approximation.

  10. For 2 SO₂(g) + O₂(g) ⇌ 2 SO₃(g), ΔH° = −198 kJ/molrxn, predict the direction of shift (left, right, or none) for each change: (a) O₂ is added; (b) SO₃ is removed; (c) the temperature is raised; (d) the volume is decreased; (e) He is added at constant volume; (f) a catalyst is added.

  11. For the reaction in problem 10, state how K changes when the temperature is raised, and explain why.

  12. For A₂(g) + B₂(g) ⇌ 2 AB(g), K = 16. A particle drawing shows 3 A₂, 1 B₂ and 4 AB molecules. Calculate Q and state whether the mixture is at equilibrium. If not, which way will it react?

  13. A rigid flask contains N₂O₄(g) ⇌ 2 NO₂(g) at equilibrium with [N₂O₄] = 0.050 M and [NO₂] = 0.100 M (Kc = 0.20). The data below show what happened next.

Time (s) [N₂O₄] (M) [NO₂] (M)
0–30 0.050 0.100
40 0.050 0.200
60 0.072 0.155
80 0.085 0.130
100 0.085 0.130

(a) What stress was applied at about 40 s? (b) In which direction did the reaction shift? Explain using Q. (c) Show by calculation that the values at 80 s are consistent with Kc.

  1. The solubility of PbBr₂ (molar mass 367.0 g/mol) is 4.3 g/L at 25 °C. Calculate Ksp.

  2. Ksp for BaF₂ is 1.8 × 10⁻⁶. Calculate its molar solubility and its solubility in g/L (molar mass 175.3 g/mol).

    1. mL of 0.0020 M Pb(NO₃)₂ is mixed with 100. mL of 0.0040 M NaCl. Ksp for PbCl₂ is 1.7 × 10⁻⁵. Will a precipitate form? Show your work.
  3. A solution contains 0.010 M Ba²⁺ and 0.010 M Sr²⁺. Na₂SO₄ is added slowly. Ksp: BaSO₄ = 1.1 × 10⁻¹⁰; SrSO₄ = 3.4 × 10⁻⁷. (a) Which sulfate precipitates first? (b) What is [SO₄²⁻] when the second salt begins to precipitate? (c) What percentage of the original Ba²⁺ is still in solution at that point?

  4. Ksp for CaF₂ is 3.5 × 10⁻¹¹. Calculate its molar solubility in (a) 0.10 M NaF and (b) 0.10 M Ca(NO₃)₂.

  5. Explain why 0.10 M NaF lowers the solubility of CaF₂ much more than 0.10 M Ca(NO₃)₂ does.

  6. Which is more soluble in dilute HCl than in water: CaCO₃ or CaSO₄? Explain, with an equation.

  7. For the dissolving of a salt X, ΔH°soln = +15.0 kJ/mol and ΔS°soln = +60.0 J/(mol·K). (a) Calculate ΔG°soln at 298 K. (b) Above what temperature is dissolving thermodynamically favourable under standard conditions? (c) Is Ksp at 298 K greater or less than 1?

  8. Describe the three "steps" of dissolving an ionic solid in water. For each, give the sign of ΔH.

  9. CaCO₃(s) ⇌ CaO(s) + CO₂(g) is at equilibrium in a closed container. Predict the effect on P_CO₂ of (a) adding more CaCO₃(s); (b) removing some CaO(s) but leaving some behind; (c) raising the temperature, given that the reaction is endothermic.

  10. A flask is filled with pure HI(g), which reacts: 2 HI(g) ⇌ H₂(g) + I₂(g). Describe how the forward and reverse rates change from the start until equilibrium.

  11. 2.0 mL of 0.010 M AgNO₃ is added to 50.0 mL of 1.0 × 10⁻⁴ M NaBr. Ksp for AgBr is 5.0 × 10⁻¹³. Will a precipitate form? Show your work.

Show the answer key
  1. In a dynamic equilibrium the forward and reverse reactions continue at equal rates. Each species is made as fast as it is used up, so its concentration does not change.

  2. (a) Kc = [NOCl]² / ([NO]²[Cl₂]). (b) Kc = [Ni(CO)₄] / [CO]⁴ (solid Ni left out). (c) Kc = Ksp = [Ca²⁺]³[PO₄³⁻]². (d) Kc = [H₃O⁺][CN⁻] / [HCN] (liquid water left out).

  3. Kp = (1.5)² / ((0.25)²(0.40)) = 2.25 / 0.025 = 90.

  4. CO and Cl₂ each fall by 0.300 M to 0.200 M. Kc = 0.300 / ((0.200)(0.200)) = 7.5.

  5. Reverse and multiply by ½: Kp = (1/90)^(1/2) = 0.11.

  6. Add the equations: H⁺ cancels. K = K₁K₂ = (4.0 × 10⁻⁴)(1.8 × 10⁹) = 7.2 × 10⁵. Yes, K >> 1, so it is product-favoured.

  7. Qc = (2.0)² / ((1.0)(1.0)³) = 4.0. Q > K (0.50), so the reaction proceeds in reverse (NH₃ decomposes).

  8. (2x)² / (0.50 − x)² = 9.0, so 2x/(0.50 − x) = 3.0 and x = 0.30. [C] = 0.60 M; [A] = [B] = 0.20 M. Check: 0.36/0.04 = 9.0.

  9. Let P_O₂ = x and P_H₂ = 2x; P_H₂O ≈ 1.0 atm because K is tiny. (2x)²(x)/(1.0)² = 1.0 × 10⁻¹⁸, so 4x³ = 1.0 × 10⁻¹⁸ and x = 6.3 × 10⁻⁷. P_O₂ = 6.3 × 10⁻⁷ atm; P_H₂ = 1.3 × 10⁻⁶ atm. The approximation is valid because 2x is about 10⁻⁶ atm, far less than 5% of 1.0 atm.

  10. (a) Right. (b) Right. (c) Left (the forward reaction is exothermic). (d) Right (3 gas moles → 2). (e) None. (f) None.

  11. K decreases. The forward reaction is exothermic, so heat is a product. Raising T shifts the equilibrium left, lowering the ratio of products to reactants at equilibrium.

  12. Δn = 0, so counts can be used: Q = 4² / ((3)(1)) = 5.3. Q < K (16), so it is not at equilibrium; it reacts forward, forming more AB.

  13. (a) NO₂ was added (only [NO₂] jumped, from 0.100 to 0.200 M). (b) Left. Immediately after, Q = (0.200)²/0.050 = 0.80 > K = 0.20, so NO₂ combined to form N₂O₄. (c) Q = (0.130)² / 0.085 = 0.20 = Kc. (Exact solution: (0.200 − 2x)²/(0.050 + x) = 0.20 gives x = 0.035, so [NO₂] = 0.130 M and [N₂O₄] = 0.085 M.)

  14. s = 4.3/367.0 = 0.0117 M. Ksp = 4s³ = 4(0.0117)³ = 6.4 × 10⁻⁶.

  15. 4s³ = 1.8 × 10⁻⁶, so s = 7.7 × 10⁻³ M. Solubility = (7.7 × 10⁻³)(175.3) = 1.3 g/L.

  16. After mixing, [Pb²⁺] = 0.0010 M and [Cl⁻] = 0.0020 M. Q = (0.0010)(0.0020)² = 4.0 × 10⁻⁹ < 1.7 × 10⁻⁵. No precipitate.

  17. (a) BaSO₄: it starts when [SO₄²⁻] = 1.1 × 10⁻¹⁰/0.010 = 1.1 × 10⁻⁸ M, much lower than for SrSO₄. (b) [SO₄²⁻] = 3.4 × 10⁻⁷/0.010 = 3.4 × 10⁻⁵ M. (c) [Ba²⁺] = 1.1 × 10⁻¹⁰ / 3.4 × 10⁻⁵ = 3.2 × 10⁻⁶ M, which is 0.032% of 0.010 M.

  18. (a) s = Ksp/[F⁻]² = 3.5 × 10⁻¹¹/(0.10)² = 3.5 × 10⁻⁹ M. (b) (0.10)(2s)² = 3.5 × 10⁻¹¹, so 0.40s² = 3.5 × 10⁻¹¹ and s = 9.4 × 10⁻⁶ M.

  19. [F⁻] is squared in the Ksp expression, so adding F⁻ lowers the allowed [Ca²⁺] (and thus s) by the square of [F⁻]. Adding Ca²⁺ only lowers the allowed [F⁻]², so s falls by a smaller factor.

  20. CaCO₃. CO₃²⁻ is a base: CaCO₃(s) + 2 H⁺(aq) → Ca²⁺(aq) + H₂O(l) + CO₂(g). Removing CO₃²⁻ makes Q < Ksp, so more dissolves. SO₄²⁻ is a very weak base and is hardly removed by H⁺, so CaSO₄'s solubility barely changes.

  21. (a) ΔG° = 15.0 − (298)(0.0600) = −2.9 kJ/mol. (b) ΔG° = 0 when T = ΔH/ΔS = 15.0/0.0600 = 250 K, so favourable above 250 K. (c) ΔG° < 0, so Ksp > 1 (Ksp = e^(2880/(8.314 × 298)) = 3.2).

  22. (1) Separating the ions of the solid: endothermic (+). (2) Breaking some solvent–solvent attractions (hydrogen bonds) to make room: endothermic (+). (3) Forming ion–dipole attractions between ions and water: exothermic (−). The overall ΔH°soln is the sum and can be either sign.

  23. (a) No change (solid not in Kp). (b) No change (as long as some CaO remains). (c) P_CO₂ increases, because K increases for an endothermic reaction when T rises.

  24. At first only HI is present, so the forward rate (decomposition of HI) is at its highest and the reverse rate is zero. As HI is used up, the forward rate falls; as H₂ and I₂ build up, the reverse rate rises. When the rates become equal, equilibrium is reached and both rates stay constant (and non-zero).

  25. Total volume = 52.0 mL. [Ag⁺] = (0.010)(2.0)/52.0 = 3.8 × 10⁻⁴ M. [Br⁻] = (1.0 × 10⁻⁴)(50.0)/52.0 = 9.6 × 10⁻⁵ M. Q = 3.7 × 10⁻⁸ > 5.0 × 10⁻¹³, so AgBr precipitates.

Stuck on a unit? Let us fix it this week.

Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.

Book a session
Chat on WhatsApp