AP Chemistry · Unit 5
Unit 5 practice questions: Kinetics
180 multiple-choice questions, sorted by topic. Each one has its own page with the answer and a worked explanation. Want a timed run instead? Practice them as a set.
5.1 Reaction rates
Learn the topic · Practice this topic- QFor , is disappearing at 0.020 M/s. At what rate is forming?
- QFor , forms at 0.040 M/s. At what rate is forming?
- QFor the reaction 4 Na(s) + O₂(g) → 2 Na₂O(s), the rate of disappearance of sodium is 1.5 × 10⁻³ M s⁻¹ (treat the sodium as dispersed so a molarity can be defined). What is the rate of disappearance of O₂?
- QFor the reaction 2 X → Y, Y is formed at 1.0 × 10⁻² M s⁻¹. What is the rate of disappearance of X?
- QWhen heated, 2 KClO₃ → 2 KCl + 3 O₂. If O₂ appears at 4.00 × 10⁻² M s⁻¹, at what rate does KClO₃ disappear?
- QEqual 0.10 g pieces of magnesium ribbon are added to excess HCl(aq) of concentrations 0.050 M, 0.10 M, 0.25 M and 0.50 M, and the time for each piece to disappear is recorded. As [HCl] increases, what happens?
- QCadmium metal reacts with hydrochloric acid. With the same mass of Cd each time, which conditions give the fastest reaction?
- Q1 M HCl(aq) and 1 M NaOH(aq) react in a closed container at 35 °C. The pressure above the solution is increased by 50%. What happens to the rate of the neutralization?
- QA reaction reaches equilibrium very quickly. What can you say about its equilibrium constant K?
- QFor , the rate of disappearance equals:
- QFor , is consumed at 0.060 M/s. At what rate does form?
- QFor , B forms at 0.010 M/s. At what rate is A consumed?
- QWhy does reaction rate usually increase with temperature?
- QZinc reacts with HCl. Which conditions give the fastest rate?
- QHow does increasing the pressure affect the rate of ?
- QWhat does a large equilibrium constant tell you about how fast equilibrium is reached?
- QWhich statement about reaction rates is true?
5.2 Introduction to rate law
Learn the topic · Practice this topic- QFor a reaction between A and B, doubling [A] while [B] is constant makes the rate four times as fast. Doubling [B] while [A] is constant doubles the rate. What is the rate law?
- QWhat are the units of the rate constant for a reaction that is second order overall?
- QFor , tripling (with fixed) multiplies the rate by 9, and quadrupling (with fixed) multiplies the rate by 4. What is the rate law?
- QA reaction obeys rate = k[M][N]². In a new experiment [M] is halved and [N] is tripled. The rate changes by a factor of
- QThe rate law is rate = k[X][Y]². What are the units of k if rate is in M s⁻¹?
- QWhich statement about reaction order is correct?
- QA reactant A is converted to product B at a constant rate until A runs out. What is the rate law?
- QFor A + B → C, rate = k[A]ˣ[B]ʸ. Suppose a larger fraction of A–B collisions became successful, with no change in concentrations. Which quantity changes?
- QThe reaction HNO₃(aq) + NH₃(aq) → NH₄NO₃(aq) is first order in each reactant with k = 14.5 M⁻¹ s⁻¹. What is the rate when [HNO₃] = 0.050 M and [NH₃] = 0.10 M?
- QFor 2 NO(g) + O₂(g) → 2 NO₂(g), initial rates of formation of NO₂ were measured. Exp. 1: [NO]₀ (M) = 0.020; [O₂]₀ (M) = 0.020; Initial rate (M s⁻¹) = 4.0 × 10⁻⁵ Exp. 2: [NO]₀ (M) = 0.040; [O₂]₀ (M) = 0.020; Initial rate (M s⁻¹) = 1.6 × 10⁻⁴ Exp. 3: [NO]₀ (M) = 0.040; [O₂]₀ (M) = 0.060; Initial rate (M s⁻¹) = 4.8 × 10⁻⁴ What is the rate law?
- QIf rate , what happens to the rate when [A] is doubled?
- QFor the reaction of NO with : Experiment 1, [NO] = 0.10 M, [] = 0.10 M, rate = M/s. Experiment 2, [NO] = 0.20 M, [] = 0.10 M, rate = M/s. Experiment 3, [NO] = 0.20 M, [] = 0.20 M, rate = M/s. What is the rate law?
- QFor rate , what are the orders with respect to P and Q?
- QWhat is the overall order for rate ?
- QOnly the balanced equation is known. What can be said about its rate law?
- QFirst-order reactant A (half-life 25 s) converts to B. A starts at 4.00 mol. What are the amounts of A and B at 75 s?
- QIf rate , what are the units of ?
- QA reactant is consumed at a constant rate regardless of its concentration. What is the reaction order?
- QA change increases the fraction of collisions that are successful, without changing concentrations. Which quantity changes?
- Q is 0.100, 0.088, 0.076 and 0.064 M at 0, 10, 20 and 30 s. What is the average rate of disappearance?
5.3 Concentration changes over time
Learn the topic · Practice this topic- QA graph of against time is a straight line. What is the order of the reaction with respect to A?
- QA first-order reaction has . What is its half-life?
- QA first-order reaction has a half-life of 10 minutes. What fraction of the reactant remains after 30 minutes?
- QPlots of , and against time are made. Only vs time is a straight line. What is the rate law?
- QA first-order reactant falls from 0.160 M to 0.080 M in 1.67 h. What is ?
- QA first-order reaction has a half-life of 4.0 h. What is k?
- QThe half-life of a first-order reaction A → products depends on
- QAfter 150 s of a first-order reaction, 12.5% of reactant A remains. What is the half-life?
- QThe percent of a reactant remaining was recorded: Time (min): 0, 2, 4, 6, 8, 12, 16 % remaining: 100, 71, 50, 35, 25, 12.5, 6.3 Which describes the order and half-life?
- QWhich plot is linear for a reaction that is second order in A?
- QA → B + C is first order with k = 0.20 s⁻¹. How long does it take for the reaction to be 35% complete?
- QX reacts with a large excess of Y. Data show that [X] falls in a straight line with time until X is gone, while [Y] barely changes. What can be concluded?
- QFor a first-order reaction with t½ = 100 s, about what percent of the reactant remains after 305 s?
- QWhich statement about radioactive decay is true?
- QA first-order reaction has a half-life of 6.93 min. What is ?
- QA first-order reaction has . What is its half-life?
- QTwo first-order reactions have half-lives of 10 min and 10 s. Which has the larger rate constant?
- QWhat does the half-life of a first-order reaction depend on?
- QIn a first-order reaction, 87.5% of the reactant is consumed in 90 s. What is the half-life?
- QWhat is the order of radioactive decay?
- QA first-order reaction has s. Approximately what percentage remains after 162 s?
- Q is 0.800, 0.400, 0.200 and 0.100 M at 0, 10, 20 and 30 s. What is the order in A?
- QFor a first-order reaction with , how long does it take for 60% of the reactant to be consumed?
- QWhich plot gives a straight line whose slope is used to find the activation energy?
5.4 Elementary reactions
Learn the topic · Practice this topic- QWhich is the rate law for the elementary step A + B → C + D?
- QAn elementary step has the rate law rate = k[A]³[B]². What are the reactants in the step, and is it likely?
- QThe equation 3 A + 3 B → C is an overall reaction (not stated to be elementary). What does it tell you about the order and molecularity?
- QAssuming each is a single elementary step with similar energy requirements, which kind of step is most likely to happen at the highest rate at equal concentrations?
- QFor the elementary step NO(g) + NO₃(g) → 2 NO₂(g), what is the overall order?
- QWhat is the rate law for the elementary step ?
- QThe overall reaction is not known to be elementary. What can be concluded about its rate law?
- QA mechanism has steps (slow) and (fast). What is the rate law, and what is the molecularity of the slow step?
- QA mechanism has steps (slow) and (fast). What is the rate law?
- QOther factors being equal, which type of elementary step tends to be fastest?
- QIf rate and [B] is held constant, how does the rate change as [A] increases?
5.5 Collision model
Learn the topic · Practice this topic- QRaising the temperature increases the rate of a reaction mainly because
- QA Maxwell–Boltzmann distribution gives
- QFor A + B → C, which collisions are effective?
- QA gas sample is warmed from 25 °C to 40 °C. How does its Maxwell–Boltzmann curve change?
- QIn a gas, 80% of collisions between A molecules do not lead to product. The best explanation is that
- QWhich statement best explains why raising the temperature by 10 °C often roughly doubles a reaction rate?
- QTwo gas samples of the same substance at the same temperature have different numbers of moles in the same volume. Compared with the more dilute sample, the more concentrated sample has
- QWhat does a Maxwell–Boltzmann distribution describe?
- QConsidering collision requirements, which reaction is likely to have the highest rate constant if it occurs in a single step?
- QWhat makes a collision effective?
- QDistribution curves for the same gas at four temperatures are compared. The highest fraction of collisions above belongs to the curve with:
- QWhat happens to the distribution curve as temperature rises?
- QA 10 °C rise often roughly doubles a reaction rate. What is the main reason?
- QOnly 25% of the collisions in a gas sample produce product. Why?
- QA gas is warmed from 300 K to 320 K. How does its distribution curve change?
- QA gas is cooled from 300 K to 280 K. How does its distribution curve change?
5.6 Reaction energy profile
Learn the topic · Practice this topic- QA reaction has the same activation energy in the forward and reverse directions. Which must be true?
- QFor an elementary step, the energy of the reactants is 20 kJ mol⁻¹, the transition state 95 kJ mol⁻¹, and the products 60 kJ mol⁻¹. What are Ea (forward) and ΔH?
- QWhat happens to the energy profile when the temperature is raised?
- QGasoline vapor and air in an engine do not react until a spark passes. Which best describes the role of the spark?
- QAt the highest point of a single-step energy profile is
- QTwo elementary reactions at the same temperature have the same frequency factor. Reaction 1 has Ea = 50 kJ mol⁻¹ and ΔH = −200 kJ mol⁻¹. Reaction 2 has Ea = 30 kJ mol⁻¹ and ΔH = +20 kJ mol⁻¹. Which is faster at equal concentrations?
- QWhat does a point on the rising part of an energy profile, below the peak, represent?
- QIf the forward and reverse activation energies of a reaction are equal, then:
- QA mechanism has steps with activation energies of 45, 60 and 38 kJ. Which step is most likely rate-determining?
- QWhat does raising the temperature do?
- QWhere on the energy profile is the activated complex?
- QA reaction has kJ forward and kJ. What is for the reverse reaction?
- QHow does increasing the temperature change the energy profile itself?
5.7 Introduction to reaction mechanisms
Learn the topic · Practice this topic- QA reaction has this mechanism. Step 1 (slow): . Step 2 (fast): . What is the rate law?
- QIn the mechanism Step 1: , Step 2: , what is ?
- QStep 1 (slow): . Step 2 (fast): . Which rate law does this mechanism predict?
- QFor the steps O₂ → 2 O; O + SO₂ → SO₃ (this step occurs twice for each O₂), which species is an intermediate?
- QA mechanism is: A + F → B + C (slow); C + A → D + E (fast). What are the overall reaction and the intermediate?
- QA mechanism is: 2 A + F → B + C + G; C + A + G → D + E. What is the overall reaction?
- QWhich statement about an intermediate is correct?
- QIn the mechanism Cl + O₃ → ClO + O₂; ClO + O → Cl + O₂, Cl is
- QWhich observation best supports a proposed mechanism?
- QWhat is the intermediate in followed by ?
- QSteps: and . What are the overall reaction and the intermediate?
- QSteps: and . What is the overall reaction?
- QWhat must be true of a valid mechanism?
5.8 Reaction mechanism and rate law
Learn the topic · Practice this topic- QFor 2 NO(g) + O₂(g) → 2 NO₂(g), the proposed mechanism is NO + NO → N₂O₂ (slow); N₂O₂ + O₂ → 2 NO₂ (fast). Which rate law agrees with this mechanism?
- QA reaction occurs in two steps: A + B → C (slow); C + 2 B → AB₃ (fast). Which is correct?
- QThe experimental rate law for 2 NO(g) + Cl₂(g) → 2 NOCl(g) at one temperature is rate = k[NO][Cl₂]. Which mechanism is consistent?
- QIn which step does the species that controls the overall rate appear?
- QReactant Z does not appear in the experimental rate law of a reaction, but it is in the overall equation. The best explanation is that
- QA mechanism predicts the experimental rate law. What can you conclude?
- QWhich step in a mechanism is rate-determining?
- QThe steps of a mechanism have activation energies of 25, 72, 40 and 18 kJ. Which step is likely slowest?
- QThe observed rate law is rate . Which mechanism is consistent with it?
- QThe slow first step of a mechanism is . What is the rate law?
- QWhy do intermediates not appear in rate laws?
- QThe volume of a gas-phase reaction mixture is decreased at constant temperature, increasing the pressure. What happens to the rate?
- QWhy does powdered chalk react faster with acid than a single lump?
5.9 Steady-state approximation
Learn the topic · Practice this topic- QMechanism: X + Y ⇌ Z (fast equilibrium); Z + A → B + C (slow). Which rate law is consistent?
- QThe first step of a two-step mechanism is 2 NO(g) ⇌ N₂O₂(g) (fast). The experimental rate law is rate = k[NO]²[H₂]. Which is the slow second step?
- QWhich statement describes the steady-state approximation?
- QMechanism: Cl₂ ⇌ 2 Cl (fast equilibrium); Cl + CHCl₃ → HCl + CCl₃ (slow); CCl₃ + Cl → CCl₄ (fast). What is the rate law for Cl₂ + CHCl₃ → HCl + CCl₄?
- QMechanism: A ⇌ B + I (fast equilibrium); I + C → D (slow). How does adding more B affect the rate?
- QMechanism: (fast equilibrium), then (slow). What is the rate law?
- QMechanism: (fast equilibrium), then (slow). What is the rate law?
5.10 Multistep reaction energy profile
Learn the topic · Practice this topic- QAn energy profile shows, from left to right: reactants, a peak, a valley, a second lower peak, and products below the reactants. Which description is correct?
- QAn energy profile has two steps. The first peak is higher above the reactants than the second peak is above the intermediate, and the products end below the reactants. Which step is rate determining, and is the reaction exothermic?
- QA profile has three peaks. How many intermediates does the mechanism have?
- QA two-step reaction has energies (kJ mol⁻¹): reactants 0, TS1 +50, intermediate +45, TS2 +110, products +20. Which is true?
- QWhich change would alter the overall ΔH shown on a multistep energy profile?
- QA profile has two peaks with a valley between them. Reading from left to right, which sequence is correct?
- QOn a profile, the products lie higher in energy than the reactants. Which reaction does this most likely represent?
- QA profile shows two peaks and a valley, with the products lower than the reactants. Which describes it?
- QEnergies (kJ): reactants 0, TS₁ 50, intermediate 20, TS₂ 45, products −10. Which step is rate-determining, and what is ?
5.11 Catalysis
Learn the topic · Practice this topic- QHow does a catalyst increase the rate of a reaction?
- QIn a mechanism, species X is a reactant in step 1 and a product in step 2, and it does not appear in the overall equation. X is
- QWhich best describes a catalyst?
- QAdding a catalyst to H₂(g) + I₂(g) ⇌ 2 HI(g) (exothermic) would
- QWhich change would alter the value of the equilibrium constant for an exothermic gas reaction?
- QA small amount of solid catalyst is added to a solution, and the reaction runs for several minutes. What happens to the amount of catalyst?
- QIn acid–base catalysis,
- QFor the I⁻-catalyzed decomposition of H₂O₂ (rate = k[H₂O₂][I⁻]), doubling [I⁻] at constant [H₂O₂] will
- QOn a metal surface, a gas reaction is zero order at high pressure but first order at low pressure. The best explanation is
- QWhich statement about the catalyzed pathway on an energy profile is correct?
- QWhich statement describes a catalyst?
- QHow does a catalyst affect a reaction?
- QFour catalysts are tested at the same temperature. The reaction reaches completion in 12, 3, 25 and 8 min. Which catalyst is most effective?
- QThe same reaction is run with and without a catalyst. Which is true?
- QHow does a solid surface catalyst work?
- QSolid platinum catalyzes a reaction between two gases. What type of catalyst is it?
- QHow does an acid catalyst usually work?
Other questions
- QIf 75.0% of a sample of phosphorus-32 decays in 28.6 days, what is its half-life?
- QThe percent of reactant remaining was recorded. Time (min): 0, 10, 30, 70 % remaining: 100, 50, 25, 12.5 Which describes the reaction?
- QFor an elementary step, Ea,forward = 120 kJ mol⁻¹ and Ea,reverse = 80 kJ mol⁻¹. Which is correct?
- QFor 2 NO₂(g) + F₂(g) → 2 NO₂F(g), the mechanism is NO₂ + F₂ → NO₂F + F (slow); NO₂ + F → NO₂F (fast). Which rate law agrees?
- QCompound X reacts with a large excess of Y. A plot of ln[X] vs. time is a straight line. Which conclusion is justified?
- QEqual masses of CaCO₃ as large chips and as fine powder are added to separate beakers of excess 1.0 M HCl at the same temperature. Compared with the chips, the powder will
- QInitial-rate data: Exp. 1: [A]₀ (M) = 0.10; [B]₀ (M) = 0.10; Initial rate (M s⁻¹) = 2.0 × 10⁻³ Exp. 2: [A]₀ (M) = 0.20; [B]₀ (M) = 0.10; Initial rate (M s⁻¹) = 8.0 × 10⁻³ Exp. 3: [A]₀ (M) = 0.20; [B]₀ (M) = 0.20; Initial rate (M s⁻¹) = 8.0 × 10⁻³ What is the rate law?
- QFor rate = k[A]²[B], both [A] and [B] are tripled. By what factor does the rate change?
- QWhat are the units of k for a reaction with rate = k[A]²?
- QFor 2 N₂O₅(g) → 4 NO₂(g) + O₂(g), NO₂ appears at 8.0 × 10⁻⁴ M s⁻¹. At what rate does O₂ appear?
- QA first-order reaction has k = 0.0347 min⁻¹. About what percent of the reactant remains after 60 min?
- QA second-order reaction has k = 0.50 M⁻¹ s⁻¹ and [A]₀ = 0.20 M. What is [A] after 30 s?
- QA reaction is zero order. [A] falls from 0.80 M to 0.50 M in 60 s. How much longer until A is used up?
- QA match does not light until it is struck. The friction of striking
- QMechanism: 2 A ⇌ A₂ (fast equilibrium); A₂ + B → C (slow). What is the rate law?
- QA multistep energy profile has two peaks and one valley; the second peak is higher above the valley than the first peak is above the reactants. Which is correct?
- QWhich statement about a catalyst for a reversible reaction is correct?
- QA first-order gas reaction is run twice in the same rigid container at the same temperature, once with 300 torr and once with 600 torr of reactant. Which is true?
- QWhich elementary step is least likely to occur as written?
- QIn the mechanism H₂O₂ + I⁻ → H₂O + IO⁻ (slow); H₂O₂ + IO⁻ → H₂O + O₂ + I⁻ (fast), which pair is correct?