AP Chemistry · Unit 6 · 7–9% of the exam

Unit 6 study guide: Thermochemistry

Unit 6 is about energy: where it goes when substances are heated, cooled, change phase or react. You will learn to decide whether a process is endothermic or exothermic from what you observe, to draw energy diagrams, to explain heat transfer with particle collisions, to do calorimetry calculations with q = mcΔT, and to calculate enthalpy changes in four different ways: from moles and ΔH, from bond enthalpies, from enthalpies of formation, and with Hess's law. The unit is worth 7–9% of the AP exam (about 10–11 class periods) and covers CED topics 6.1 to 6.9. Calorimetry and enthalpy calculations also appear in many free-response questions from other units. Entropy (S) and Gibbs free energy (G), which decide whether a reaction is thermodynamically favored, are part of Unit 9; they are only mentioned here as a forward pointer.

Topic notes

Each topic page has the lesson, in-depth notes with worked examples, free-response practice with solutions, and multiple-choice questions.

Exam-style free-response set

Modelled on released AP free-response questions, rewritten with new substances and numbers. Time yourself (about 23 minutes for a 10-point question, 9 minutes for a 4-point one), then mark your work with the point-by-point solution.

These questions are written in the style of released AP free-response questions. Questions 1–3 are long (10 points each); questions 4–5 are short (4 points each). Use a calculator and show all work.

FRQ 1 (10 points). Modelled on 2013 AP FRQ Q3 (calorimetry of a metal oxide with acid).

A student measures the enthalpy change for ZnO(s) + 2 H⁺(aq) → Zn²⁺(aq) + H₂O(l) using a polystyrene-cup calorimeter. In each trial, solid ZnO (molar mass 81.38 g/mol) is added to 100.0 mL of 1.0 M HCl. The data are shown.

Trial Volume of 1.0 M HCl (mL) Mass of ZnO (g) Initial temperature (°C) Final temperature (°C)
1 100.0 0.81 24.0 26.0
2 100.0 1.63 23.5 27.5
3 100.0 0.81 25.0 28.1
4 100.0 1.63 24.2 28.2

(a) Which is the limiting reactant in every trial, HCl or ZnO? Justify your answer with a calculation.

(b) The data in one trial are inconsistent with the others. Identify that trial and explain how you identified it.

(c) Using trial 2, calculate the magnitude of q, the heat absorbed by the solution. Assume the solution has a mass of 101.6 g, a specific heat of 4.18 J/(g·°C), and that the calorimeter absorbs no heat.

(d) Determine the student's experimental value of ΔH for the reaction in kJ/molᵣₓₙ. Include the sign.

(e) Use the ΔH°f values ZnO(s) −350.5, H₂O(l) −285.8, Zn²⁺(aq) −153.9, H⁺(aq) 0 kJ/mol to calculate the accepted ΔH°.

(f) If the calorimeter leaked heat to the room, would this help explain the difference between the experimental and accepted values? Explain.

Show the solution

(a) ZnO. In the largest trial, n(ZnO) = 1.63/81.38 = 0.0200 mol, which needs 2 × 0.0200 = 0.0400 mol H⁺. Available H⁺ = 0.1000 L × 1.0 M = 0.10 mol, which is more than enough. So HCl is in excess and ZnO is limiting in all trials. (1 point)

(b) Trial 3. Trials 1 and 3 use the same mass of ZnO, so they should give the same ΔT, but trial 1 gives 2.0 °C and trial 3 gives 3.1 °C. Trials 2 and 4 use twice the mass and both give 4.0 °C, which is twice the ΔT of trial 1. So trials 1, 2 and 4 agree with each other and trial 3 does not. (1 point for the trial, 1 point for the explanation)

(c) ΔT = 27.5 − 23.5 = 4.0 °C. q = mcΔT = (101.6 g)(4.18 J/(g·°C))(4.0 °C) = 1.7 × 10³ J (1699 J). (1 point for setup, 1 point for answer with units. Using 100.0 g gives 1.67 × 10³ J and also earns credit.)

(d) n(ZnO) = 1.63/81.38 = 0.0200 mol. qrxn = −1.70 kJ. ΔH = −1.70 kJ / 0.0200 mol = −85 kJ/molᵣₓₙ. (1 point for moles, 1 point for value with negative sign)

(e) ΔH° = [ΔH°f(Zn²⁺) + ΔH°f(H₂O)] − [ΔH°f(ZnO) + 2ΔH°f(H⁺)] = [−153.9 + (−285.8)] − [−350.5 + 0] = −89.2 kJ/molᵣₓₙ. (1 point for setup, 1 point for answer)

(f) Yes. If heat leaked out, the solution would not reach as high a temperature, so the measured q and the magnitude of ΔH would be too small. The experimental value (−85 kJ/molᵣₓₙ) is smaller in magnitude than the accepted value (−89.2 kJ/molᵣₓₙ), which is consistent with heat loss. (1 point)

FRQ 2 (10 points). Modelled on 2016 AP FRQ Q1(a) and 2019 AP FRQ Q1(e) (enthalpy of solution by calorimetry).

A student investigates the dissolving of ammonium nitrate, NH₄NO₃ (molar mass 80.05 g/mol), which is used in instant cold packs. The student has a polystyrene-cup calorimeter with a lid, a balance (±0.01 g) and a thermometer (±0.1 °C). The student adds 8.00 g of NH₄NO₃ to 100.0 g of water at 25.0 °C, stirs until it dissolves, and records a lowest temperature of 19.4 °C.

(a) Calculate the magnitude of the heat transferred. Assume the specific heat of the solution is 4.18 J/(g·°C).

(b) Calculate ΔHsoln for NH₄NO₃ in kJ/molᵣₓₙ. Include the sign.

(c) List the measurements that the student had to make to get the data used in (a) and (b).

(d) Using particle-level reasoning about attractions broken and formed, explain why the process is endothermic.

(e) Describe an energy diagram for NH₄NO₃(s) → NH₄⁺(aq) + NO₃⁻(aq). State which side is higher.

(f) Some of the NH₄NO₃ did not dissolve, but the student used 8.00 g in the calculation. Would the calculated ΔHsoln be too large, too small, or unaffected in magnitude? Explain.

(g) A cold pack must cool 250. g of water from 25.0 °C to 5.0 °C. Using your answer to (b), calculate the mass of NH₄NO₃ needed. Assume the solution has a mass of 250. g and c = 4.18 J/(g·°C).

Show the solution

(a) m = 100.0 + 8.00 = 108.0 g. ΔT = 19.4 − 25.0 = −5.6 °C. |q| = (108.0)(4.18)(5.6) = 2.5 × 10³ J (2528 J). (1 point)

(b) The solution lost 2528 J, so the dissolving NH₄NO₃ gained +2528 J. n = 8.00/80.05 = 0.0999 mol. ΔHsoln = +2.528 kJ / 0.0999 mol = +25 kJ/molᵣₓₙ (25.3). (1 point for moles, 1 point for value with positive sign)

(c) Mass of water (or of the empty and filled cup); mass of NH₄NO₃; initial temperature of the water; lowest (final) temperature of the solution. (1 point for all four)

(d) Energy is absorbed to separate NH₄⁺ and NO₃⁻ ions from the crystal lattice (overcoming ion–ion attractions) and to separate some water molecules (overcoming hydrogen bonds). Energy is released when ion–dipole attractions form between the ions and water. For NH₄NO₃, the energy absorbed is greater than the energy released, so the net process absorbs energy from the water and is endothermic. (1 point for broken attractions needing energy, 1 point for comparing to energy released by ion–dipole attractions)

(e) The product side, NH₄⁺(aq) + NO₃⁻(aq), is higher than the reactant side, NH₄NO₃(s), by about 25 kJ/mol; the ΔH arrow points up. (1 point)

(f) Too small. Fewer moles actually dissolved than 0.0999 mol, so less heat was absorbed. Dividing that smaller q by the larger assumed number of moles gives a ΔHsoln with a smaller magnitude than the true value. (1 point)

(g) q = (250.)(4.18)(20.0) = 20 900 J = 20.9 kJ. n = 20.9/25.3 = 0.826 mol. Mass = 0.826 × 80.05 = 66.1 g. (1 point for q, 1 point for mass; consistent answers using the value from (b) earn credit)

FRQ 3 (10 points). Modelled on 2012 AP FRQ Q3(b)–(c), 2011 AP FRQ Q3(c) and CED sample FRQ Q1(g) (enthalpy from bonds, formation data and phase changes).

Ethanol vapor can be dehydrated to ethene: C₂H₅OH(g) → C₂H₄(g) + H₂O(g).

Bond C–C C=C C–H C–O O–H
Average bond enthalpy (kJ/mol) 348 614 413 358 463
Substance C₂H₅OH(l) C₂H₅OH(g) C₂H₄(g) H₂O(g)
ΔH°f (kJ/mol) −277.7 −234.8 +52.3 −241.8

(a) Using the bond enthalpies, estimate ΔH° for the reaction.

(b) Using the ΔH°f data, calculate ΔH° for the reaction.

(c) Give one reason why the answers to (a) and (b) are not identical.

(d) The reaction is carried out in a rigid, insulated container. Will the temperature of the contents increase, decrease, or stay the same? Justify.

(e) Calculate ΔH° for C₂H₅OH(l) → C₂H₄(g) + H₂O(g), and explain using Hess's law why it differs from (b).

(f) Is the magnitude of ΔH° for C₂H₅OH(g) → C₂H₄(g) + H₂O(l) greater than, less than, or equal to the value in (b)? Justify.

(g) Calculate the heat that must be supplied to dehydrate 1.00 kg of ethanol vapor.

Show the solution

(a) Ethanol is CH₃–CH₂–O–H; ethene is H₂C=CH₂; water is H–O–H. Broken (all bonds in ethanol): 5 C–H, 1 C–C, 1 C–O, 1 O–H = 5(413) + 348 + 358 + 463 = 3234 kJ. Formed: 4 C–H, 1 C=C (ethene) and 2 O–H (water) = 4(413) + 614 + 2(463) = 3192 kJ. ΔH ≈ 3234 − 3192 = +42 kJ/molᵣₓₙ. (Shortcut: cancelling the four C–H bonds present on both sides gives the same result: [348 + 358 + 413 + 463] − [614 + 2(463)] = 1582 − 1540 = +42 kJ.) (1 point for correct bond counts, 1 point for answer)

(b) ΔH° = [52.3 + (−241.8)] − (−234.8) = +45.3 kJ/molᵣₓₙ. (1 point for setup, 1 point for answer)

(c) Bond enthalpies are average values taken from many compounds, so they do not exactly match the bonds in ethanol, ethene and water. (1 point)

(d) Decrease. The reaction is endothermic (ΔH > 0), so the energy absorbed comes from the kinetic energy of the particles in the container; with no heat able to enter, the temperature drops. (1 point)

(e) ΔH° = [52.3 + (−241.8)] − (−277.7) = +88.2 kJ/molᵣₓₙ. By Hess's law, this reaction = vaporization of ethanol (C₂H₅OH(l) → C₂H₅OH(g), ΔH = −234.8 − (−277.7) = +42.9 kJ/mol) + the reaction in (b) (+45.3 kJ). The extra endothermic vaporization step makes ΔH larger: 42.9 + 45.3 = 88.2 kJ. (1 point for value, 1 point for Hess's-law explanation)

(f) Less. H₂O(l) is lower in enthalpy than H₂O(g) by 44.0 kJ/mol (condensation is exothermic), so the products are lower and ΔH = 45.3 − 44.0 = +1.3 kJ/molᵣₓₙ, which has a smaller magnitude. (1 point)

(g) n = 1000./46.07 = 21.7 mol. q = 21.7 × 45.3 = 983 kJ (9.83 × 10² kJ) absorbed. (1 point; using the value from (a) gives 912 kJ and also earns credit)

FRQ 4 (4 points). Modelled on 2017 AP FRQ Q5 (enthalpy of combustion of an alcohol using a burner).

A student burns ethanol, C₂H₅OH(l) (molar mass 46.07 g/mol), in a spirit burner under a metal can containing water. The burner is weighed before and after.

Quantity Value
Mass of ethanol burned 0.62 g
Mass of water heated 150.00 g
Initial water temperature 21.5 °C
Final water temperature 46.8 °C
Specific heat of water 4.18 J/(g·°C)

(a) Calculate the heat, in kJ, absorbed by the water. Assume all the heat from the burning ethanol goes into the water.

(b) Calculate the heat released per mole of ethanol burned. Report your answer with the correct number of significant figures.

(c) A second student uses ethanol that is contaminated with water (which mixes with ethanol). The mass loss of the burner is again 0.62 g, with the same water mass and starting temperature. Will the final water temperature be greater than, less than, or equal to 46.8 °C? Justify.

Show the solution

(a) q = (150.00)(4.18)(46.8 − 21.5) = (150.00)(4.18)(25.3) = 15 900 J = 15.9 kJ. (1 point)

(b) n = 0.62/46.07 = 0.0135 mol. Heat per mole = 15.9 kJ / 0.0135 mol = 1.2 × 10³ kJ/mol (two significant figures, set by 0.62 g). (1 point for calculation, 1 point for two significant figures)

(c) Less than 46.8 °C. Part of the 0.62 g lost is water, which evaporates but does not burn, so fewer moles of ethanol are burned and less heat is released to the water. (1 point)

FRQ 5 (4 points). Modelled on 2021 AP FRQ Q4 (hand warmer).

A hand warmer contains iron powder, a catalyst and sand. When the packet is opened, iron reacts with oxygen: 4 Fe(s) + 3 O₂(g) → 2 Fe₂O₃(s), ΔH° = −1648 kJ/molᵣₓₙ. The temperature of the mixture is recorded.

Time (min) 0 1 2 3 4 5
Temperature (°C) 21.0 28.4 33.9 37.5 39.6 39.3

(a) The mixture has a total mass of 15.0 g and a specific heat of 0.72 J/(g·°C). Calculate the heat absorbed by the mixture from 0 to 4 minutes.

(b) Calculate the mass of Fe that reacted to produce this heat.

(c) In a second packet, the mass of iron that reacts is doubled but the mass of sand is the same. Will the maximum temperature be greater than, less than, or equal to that of the first packet? Justify.

Show the solution

(a) q = (15.0)(0.72)(39.6 − 21.0) = (15.0)(0.72)(18.6) = 201 J. (1 point)

(b) Moles of reaction = 201 J / 1 648 000 J/molᵣₓₙ = 1.22 × 10⁻⁴ mol. n(Fe) = 4 × 1.22 × 10⁻⁴ = 4.88 × 10⁻⁴ mol. Mass = 4.88 × 10⁻⁴ × 55.85 = 0.0272 g. (1 point for moles of Fe using the 4:1 ratio, 1 point for mass)

(c) Greater. Twice as much iron reacts, so about twice as much heat is released, while the total heat capacity of the packet increases only slightly (the sand and other contents are the same). More heat with almost the same heat capacity gives a larger temperature rise. (1 point)

Exam-style multiple choice

18 questions in the style of the released exams. Each opens on its own page: choose an answer, then see the explanation.

  1. Q1Solid potassium nitrate, KNO₃, is added to water at 25 °C. It dissolves and the temperature of the solution decreases. Which statement is correct?
  2. Q2When solid barium hydroxide octahydrate and solid ammonium chloride are mixed in a flask, the flask becomes cold enough to freeze water on its outside and ammonia gas is produced. What is the sign of ΔH, and what happens to the energy of the reacting system?
  3. Q3Using ΔH°f values NH₃(g) −46.1, NO(g) +90.3 and H₂O(g) −241.8 kJ/mol, what is ΔH° for 4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(g)?
  4. Q40.243 g of Mg reacts completely with excess HCl(aq) in a coffee-cup calorimeter that contains 100. g of solution. The temperature rises by 11.0 °C. Assume c = 4.18 J/(g·°C). What is ΔH for Mg(s) + 2 H⁺(aq) → Mg²⁺(aq) + H₂(g)?
  5. Q5Using average bond enthalpies H–H 436, Br–Br 193 and H–Br 366 kJ/mol, estimate ΔH for H₂(g) + Br₂(g) → 2 HBr(g).
  6. Q6A pure substance is heated at a constant rate from solid to gas. On the heating curve, which segment is the longest?
  7. Q7The specific heat of aluminum is 0.897 J/(g·°C). What is its molar heat capacity? (Molar mass 26.98 g/mol.)
  8. Q8For A → B, ΔH = ΔH₁, and for B → C, ΔH = ΔH₂. What is ΔH for C → A?
  9. Q9100.0 g of water at 80.0 °C is mixed with 50.0 g of water at 20.0 °C in an insulated container. What is the final temperature?
  10. Q10The same reaction is run with and without a catalyst. Which quantity is the same in both cases?
  11. Q11Which sample needs the most energy to raise its temperature by 1.0 °C?
  12. Q12Which process has a positive ΔH?
  13. Q13For 2 H₂(g) + O₂(g) → 2 H₂O(l), ΔH° = −571.6 kJ/molᵣₓₙ. How much heat is released when 1.00 g of H₂ burns in excess O₂?
  14. Q14The standard enthalpy of formation of carbon monoxide is the ΔH for which reaction?
  15. Q15An endothermic reaction is carried out in a beaker on the bench. Right after the reaction, the products are colder than the room. Which statement describes what happens next?
  16. Q16For water, ΔH_fus = 6.0 kJ/mol and ΔH_vap = 45.0 kJ/mol at 0 °C. What is ΔH for H₂O(s) → H₂O(g) at 0 °C?
  17. Q17Which statement about a bomb calorimeter is correct?
  18. Q18The same amount of energy is added to 50.0 g of water and to 100.0 g of water, both starting at 20.0 °C. The 50.0 g sample warms by 8.0 °C. By how much does the 100.0 g sample warm?

Unit 6 worksheet

Work these problems on paper. Use c(water) = 4.18 J/(g·°C), and the bond-enthalpy and ΔH°f tables in topics 6.7 and 6.8 when values are not given.

  1. Classify each process as endothermic or exothermic and give the sign of ΔH: (a) steam condensing on a mirror; (b) NH₄Cl dissolving in water while the solution cools; (c) butane burning in a lighter; (d) dry ice, CO₂(s), subliming.

  2. A system releases 25.0 kJ of heat while the surroundings do 8.0 kJ of work on it. Calculate ΔE for the system.

  3. An energy diagram shows reactants at 30 kJ, the top of the hump at 110 kJ and the products at −50 kJ. Find ΔH, Eₐ (forward) and Eₐ (reverse). Is the reaction endothermic or exothermic?

  4. A hot iron nail is dropped into a beaker of cold water. Explain, in terms of particle collisions, how energy is transferred and what is true when thermal equilibrium is reached.

  5. Calculate the heat needed to warm 250.0 g of water from 18.5 °C to 76.0 °C. Give your answer in kJ.

  6. Calculate q when 45.0 g of aluminum (c = 0.897 J/(g·°C)) cools from 95.0 °C to 22.0 °C. Is energy gained or lost by the aluminum?

  7. 312 J raises the temperature of 40.0 g of an unknown metal from 21.4 °C to 38.6 °C. Calculate its specific heat and identify the metal from: Al 0.897, Fe 0.449, Cu 0.385, Pb 0.129 J/(g·°C).

  8. A 60.0 g metal sample at 100.0 °C is placed in 100.0 g of water at 22.0 °C in an insulated cup. The final temperature is 26.3 °C. Calculate the specific heat of the metal.

  9. 50.0 mL of 0.500 M HCl and 50.0 mL of 0.500 M NaOH, both at 22.0 °C, are mixed in a coffee-cup calorimeter. The temperature rises to 25.4 °C. Assume the density is 1.00 g/mL. Calculate ΔH_neutralization in kJ/mol of water formed.

  10. 1.000 g of sucrose, C₁₂H₂₂O₁₁ (molar mass 342.3 g/mol), is burned in a bomb calorimeter with a heat capacity of 9.50 kJ/°C. The temperature rises by 1.74 °C. Calculate the molar enthalpy of combustion of sucrose.

  11. How much energy is needed to melt 50.0 g of ice at 0 °C? (ΔHfus = 6.01 kJ/mol)

  12. Calculate the total energy needed to convert 100.0 g of liquid water at 25.0 °C to steam at 100.0 °C. (ΔHvap = 40.7 kJ/mol)

  13. A 0.500 mol sample of a pure solid is heated at a constant 500. J/min. The temperature stays constant at its melting point for 4.0 min and at its boiling point for 30.0 min. Calculate ΔHfus and ΔHvap in kJ/mol, and explain why the boiling plateau is longer.

  14. 2 C₈H₁₈(l) + 25 O₂(g) → 16 CO₂(g) + 18 H₂O(l), ΔH° = −10 900 kJ/molᵣₓₙ. How much heat is released when 1.00 L of octane (density 0.703 g/mL, molar mass 114.22 g/mol) burns?

  15. Use the ΔH°f table (topic 6.8) to calculate ΔH° for the thermite reaction 2 Al(s) + Fe₂O₃(s) → Al₂O₃(s) + 2 Fe(s).

  16. The enthalpies of combustion of graphite and diamond are −393.5 kJ/mol and −395.4 kJ/mol (both form CO₂(g)). Use Hess's law to find ΔH for C(s, graphite) → C(s, diamond). Which form of carbon is lower in enthalpy?

  17. Use bond enthalpies to estimate ΔH for H₂C=CH₂(g) + Cl₂(g) → ClH₂C–CH₂Cl(g).

  18. For N₂(g) + 3 H₂(g) → 2 NH₃(g), ΔH° = −92 kJ/molᵣₓₙ. Using N≡N = 941 kJ/mol and H–H = 436 kJ/mol, calculate the average N–H bond enthalpy.

  19. CH₃OH(l) + 3/2 O₂(g) → CO₂(g) + 2 H₂O(l), ΔH° = −726.1 kJ/molᵣₓₙ. Use ΔH°f of CO₂(g) and H₂O(l) to calculate ΔH°f of CH₃OH(l).

  20. 4.00 g of H₂ and 16.0 g of O₂ react: 2 H₂(g) + O₂(g) → 2 H₂O(l), ΔH° = −571.6 kJ/molᵣₓₙ. Identify the limiting reactant and calculate the heat released.

  21. Explain why the temperature of a pot of boiling water stays at 100 °C while the burner is still supplying energy.

  22. Describe particulate diagrams (before and after) for solid KOH dissolving in water. Name the attractions broken and formed, and explain why the solution warms.

  23. A student dissolves different masses of LiCl (molar mass 42.39 g/mol) in 100.0 g of water.

Mass of LiCl (g) 2.00 4.00 6.00 8.00
Temperature rise (°C) 4.1 8.0 11.8 12.9

(a) Which trial does not fit the pattern? Suggest a reason. (b) Use the 4.00 g trial to calculate ΔHsoln of LiCl in kJ/mol (mass of solution = 104.0 g).

  1. For CH₃OH(l) + 3/2 O₂(g) → CO₂(g) + 2 H₂O(l), ΔH° = −726.1 kJ/molᵣₓₙ. Given H₂O(l) → H₂O(g), ΔH = +44.0 kJ/mol, calculate ΔH° for the reaction when the water is produced as H₂O(g).

  2. An 80.0 g piece of iron (c = 0.449 J/(g·°C)) at 250.0 °C is dropped into 200.0 g of water at 15.0 °C in an insulated container. Calculate the final temperature.

  3. Is the magnitude of ΔH° for 2 SO₂(g) + O₂(g) → 2 SO₃(l) greater than, less than or equal to that for 2 SO₂(g) + O₂(g) → 2 SO₃(g)? Justify.

Show the answer key
  1. (a) Exothermic, ΔH < 0. (b) Endothermic, ΔH > 0 (the water lost energy to the dissolving salt). (c) Exothermic, ΔH < 0. (d) Endothermic, ΔH > 0.

  2. ΔE = q + w = (−25.0) + (+8.0) = −17.0 kJ.

  3. ΔH = −50 − 30 = −80 kJ (exothermic). Eₐ(forward) = 110 − 30 = 80 kJ. Eₐ(reverse) = 110 − (−50) = 160 kJ.

  4. Iron atoms vibrate with greater average kinetic energy than the water molecules move. Collisions at the surface transfer energy from iron atoms to water molecules, so the iron cools and the water warms. At thermal equilibrium both have the same temperature (same average kinetic energy) and there is no net energy transfer, although collisions continue.

  5. q = (250.0)(4.18)(57.5) = 60 100 J = 60.1 kJ.

  6. q = (45.0)(0.897)(22.0 − 95.0) = −2.95 × 10³ J. Energy is lost by the aluminum.

  7. c = 312/(40.0 × 17.2) = 0.454 J/(g·°C); the metal is iron.

  8. qwater = (100.0)(4.18)(4.3) = 1797 J. cmetal = 1797/(60.0 × 73.7) = 0.41 J/(g·°C).

  9. qsoln = (100.0)(4.18)(3.4) = 1421 J. n(H₂O) = 0.0250 mol. ΔH = −1.421 kJ/0.0250 mol = −57 kJ/mol.

  10. qcal = 9.50 × 1.74 = 16.5 kJ; qrxn = −16.5 kJ. n = 1.000/342.3 = 2.921 × 10⁻³ mol. ΔHcomb = −16.53/0.002921 = −5.66 × 10³ kJ/mol.

  11. n = 50.0/18.02 = 2.775 mol; q = 2.775 × 6.01 = 16.7 kJ.

  12. Warm: (100.0)(4.18)(75.0) = 31 350 J = 31.4 kJ. Boil: (100.0/18.02)(40.7) = 225.9 kJ. Total = 257 kJ.

  13. Melting: q = 500. × 4.0 = 2000 J; ΔHfus = 2.0 kJ/0.500 mol = 4.0 kJ/mol. Boiling: q = 500. × 30.0 = 15 000 J; ΔHvap = 15.0/0.500 = 30. kJ/mol. Boiling needs more energy because the particles must be separated almost completely (all intermolecular attractions overcome), whereas melting only loosens them.

  14. Mass = 703 g; n = 703/114.22 = 6.155 mol. Heat = 6.155 × (10 900/2) = 3.35 × 10⁴ kJ released.

  15. ΔH° = [−1675.7 + 2(0)] − [2(0) + (−824.2)] = −851.5 kJ/molᵣₓₙ.

  16. Graphite combustion as written (−393.5) plus reversed diamond combustion (+395.4): ΔH = +1.9 kJ/mol. Graphite is lower in enthalpy (that is why it, not diamond, is the standard state with ΔH°f = 0).

  17. Broken: C=C + Cl–Cl = 614 + 242 = 856 kJ. Formed: C–C + 2 C–Cl = 348 + 2(328) = 1004 kJ. ΔH ≈ 856 − 1004 = −148 kJ/molᵣₓₙ. (The four C–H bonds cancel.)

  18. −92 = [941 + 3(436)] − 6(N–H). 6(N–H) = 2249 + 92 = 2341. N–H = 390 kJ/mol.

  19. −726.1 = [−393.5 + 2(−285.8)] − ΔH°f(CH₃OH). ΔH°f(CH₃OH) = −965.1 + 726.1 = −239.0 kJ/mol.

  20. n(H₂) = 1.984 mol (needs 0.992 mol O₂); n(O₂) = 0.500 mol, so O₂ is limiting. Moles of reaction = 0.500. Heat released = 0.500 × 571.6 = 286 kJ.

  21. During boiling, the energy supplied is used to overcome the intermolecular attractions (hydrogen bonds) so molecules can escape into the gas phase. This raises their potential energy, not their average kinetic energy, so the temperature stays constant until all the liquid has boiled.

  22. Before: a solid lattice of alternating K⁺ and OH⁻ ions next to liquid water molecules. After: separate K⁺ and OH⁻ ions, each surrounded by water molecules; the O (partial negative) ends of water point toward K⁺ and the H (partial positive) ends point toward OH⁻. Broken: ion–ion attractions in the lattice and some hydrogen bonds in water (endothermic). Formed: ion–dipole attractions (exothermic). More energy is released forming ion–dipole attractions than is absorbed, so dissolving is exothermic and the solution warms.

  23. (a) The 8.00 g trial. The first three points rise by about 4 °C per 2 g, so 8.00 g should give about 15–16 °C. A smaller rise suggests not all of the LiCl dissolved, or heat was lost (for example, the lid was off). (b) q = (104.0)(4.18)(8.0) = 3478 J. n = 4.00/42.39 = 0.0944 mol. ΔHsoln = −3.478/0.0944 = −37 kJ/mol.

  24. Add 2 × (H₂O(l) → H₂O(g)): ΔH = −726.1 + 2(44.0) = −638.1 kJ/molᵣₓₙ.

  25. (80.0)(0.449)(250.0 − T) = (200.0)(4.18)(T − 15.0). 8980 − 35.92T = 836T − 12 540. 871.9T = 21 520. T = 24.7 °C.

  26. Greater. SO₃(l) is lower in enthalpy than SO₃(g) because condensation releases energy. The products are lower, so the difference between reactants and products, and the energy released, is larger.

Stuck on a unit? Let us fix it this week.

Book a 30-minute one-to-one session for $20. Bring a test, a homework set or the topic that is not clicking.

Book a session
Chat on WhatsApp